Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MDF6-4DS-3.5C

Manufacturer

Hirose Electric
Manufacturer's Part Number

MDF6-4DS-3.5C
Description

POWER CONNECTOR; Reliability: COMMERCIAL; Contact Material: NOT SPECIFIED; MIL Conformity: NO; Termination Contact Finish: TIN; JESD-609 Code: e3;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

LM317T

Sgs-ates Componenti Electronici S P A

Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;

Details

BAV99-7-F

Diodes Incorporated

Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.

Details

1N4148

Frontier Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Vishay Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Brightking

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRG0805F10R

TE Connectivity

TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

BAV99

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

Details

1N4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Philips Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DS18B20U

Maxim Integrated

DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

C1210C104K5RACTU

KEMET Corporation

KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.

Details

MBRS1100T3G

Onsemi

MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MDF6-4DS-3.5C Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
MIL Conformity:	NO
Termination Contact Finish:	TIN
IEC Conformity:	NO
Connector Type:	POWER CONNECTOR
Contact Material:	NOT SPECIFIED
Sub-Category:	Headers and Edge Type Connectors
Reliability:	COMMERCIAL
DIN Conformance:	NO
JESD-609 Code:	e3

Category Top Products

1-316132-2

TE Connectivity

TE Connectivity 1-316132-2 is a RECTANGULAR POWER CONNECTOR with GLASS FILLED POLYESTER insulator. It has SOLDERABLE RETENTION CLIPS for BOARD mounting, rated at 15A mains connector rating. Ideal for applications requiring polarized connectors with 5 contacts and UL94V-0 flammability code.

1716920206

Molex

RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;

39-01-2061

Molex

The Molex 39-01-2061 is a rectangular power connector with 6 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in cable and panel mounting setups. With UL94V-2 flammability rating and polarization key, it offers reliable connectivity for various power systems.

1-480318-0

TE Connectivity

TE Connectivity 1-480318-0 is a power connector with 0.53" body length, 0.295" width, and 0.86" depth. Insulation resistance of 500M ohm, operating temp range -55 to 105°C. Used in commercial applications for cable mounting with crimp termination.

1-1954289-1

TE Connectivity

TE Connectivity's 1-1954289-1 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates in temperatures from -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.

1-770174-1

TE Connectivity

TE Connectivity's 1-770174-1 is a rectangular power connector with 4 contacts, rated at 600V and 9.5A. Featuring POLYAMIDE insulation material, it has a durability of 500 cycles and operates b/w -55 to 105°C. Ideal for board mounting applications requiring reliable male contact pins in commercial settings.

39-28-8140

Molex

The Molex 39-28-8140 is a rectangular power connector with a body length of 1.2", body width of 0.38", and body depth of 0.5". It has an insulation resistance of 1,000,000,000 ohm and can withstand a dielectric voltage of 2200VAC. This connector is commonly used in board mounting applications for power connections.

43640-0501

Molex

The Molex 43640-0501 is a rectangular power connector with 5A signal current rating. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications, this connector offers durability up to 30 cycles and UL flammability rating of 94V-0.

10-84-5060

Molex

Molex 10-84-5060 is a rectangular power connector with 6 contacts, rated for 50 cycles durability. It features bright tin termination finish, polyester insulator material, and can withstand up to 500VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -55°C to 105°C.

350431-1

TE Connectivity

TE Connectivity's 350431-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It features 6 contacts, rated at 12A, and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durable connectors with tin finish contacts.

43650-0501

Molex

The Molex 43650-0501 is a rectangular power connector with 5 contacts, featuring a mating contact pitch of 0.118" and body width of 0.172". Ideal for board mounting applications, it has a termination contact finish of TIN OVER NICKEL and insulator material made of GLASS FILLED LIQUID CRYSTAL POLYMER.

43045-1612

Molex

Molex 43045-1612 is a rectangular power connector with 16 contacts, rated at 5A signal current. It features LCP insulator material, brass contact material, and polarization key for secure connections. Ideal for board mounting applications in commercial settings due to its durability and UL flammability rating of 94V-0.

YLP-02V(NN)

J S T Mfg

YLP-02V(NN) by J S T Mfg is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. Featuring 2 contacts, it has a 94V-0 UL Flammability Code. Ideal for CABLE mounting, CRIMP termination, and FEMALE contact gender in PLUG body style applications.

2-794617-4

TE Connectivity

TE Connectivity 2-794617-4 is a Power Connector with 24 contacts, rated at 250V and 5A. Featuring POLYAMIDE66 insulator material, it has a mating contact pitch of 0.118" and operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable power connections.

IPBT-105-H2-T-D-K

Samtec

IPBT-105-H2-T-D-K by Samtec is a power connector with liquid crystal polymer insulator, matte tin over nickel contact finish, and copper alloy contacts. It has a temperature range of -55 to 105°C and meets CSA and UL standards. Ideal for commercial applications requiring a reliable surface mount male connector with 10 contacts on a straight board mounting style.

MDF6-4DS-3.5C

Not In Stock

Popular Products

SS14

AB26TRB-32.768KHZ--T

MMBT2222ALT1G

LM317T

BAV99-7-F

1N4148

SS14

SMBJ18CA

CRG0805F10R

MURS160T3G

BAT54SLT1G

LM7805CT

BAV99

RK73H2ATTD10R0F

1N4148

2N2222A

DS18B20U

C1210C104K5RACTU

MBRS1100T3G

BAV99

MDF6-4DS-3.5C Technical Details

Category Top Products

1-316132-2

1716920206

39-01-2061

1-480318-0

1-1954289-1

1-770174-1

39-28-8140

43640-0501

10-84-5060

350431-1

43650-0501

43045-1612

YLP-02V(NN)

2-794617-4

IPBT-105-H2-T-D-K

43020-1000

76825-0002

794270-1

31068-1010

1720430802