Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

HR30-SC-211

Manufacturer

Hirose Electric
Manufacturer's Part Number

HR30-SC-211
Description

CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Material: PHOSPHOR BRONZE; Contact Gender: FEMALE; Minimum Wire Size: 30 AWG;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

MBRA340T3G

Onsemi

MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

ULN-2803A

Sprague Electric

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM358MX

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

KSZ9031RNXIC

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

LM107H/883

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;

Details

CRCW04020000Z0EDHP

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

LM107H/883

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;

Details

HR30-SC-211 Technical Details

TYPE	DESCRIPTION
Minimum Wire Size:	30 AWG
Mounting Style:	STRAIGHT
Other Names:	HR881CT HR881TR *HR30-SC-211 HR30SC211 130-0017-3-00
Maximum Wire Size:	26 AWG
MIL Conformity:	NO
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
IEC Conformity:	NO
Material:	PHOSPHOR BRONZE
DIN Conformity:	NO

Category Top Products

M23053/5-111-9

Dunbar Products

ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;

WM-6P

TE Connectivity

TE Connectivity's WM-6P is an Assembly Product for DTM SERIES. It operates b/w -55°C to 125°C, accommodating wire sizes up to 0 AWG. Designed for power and signal applications, it features Polybutylene Terephthalate material for robust performance.

1-963530-1

TE Connectivity

CONNECTOR ACCESSORY;

293736-1

TE Connectivity

TE Connectivity's 293736-1 is a male power contact with max operating temp of 85°C and min of -20°C. It supports wire size up to 0 AWG, made of polyamide. Ideal for assembly products requiring high-power connections in various industries.

CLIPFIX35

Phoenix Contact

TERMINAL BLOCK ACCESSORY; Assembly Item Name: END CLAMP; IEC Conformity: NO; Material: PA; Approvals (V): UL; DIN Conformity: NO;

1SET111005R0000

TE Connectivity

TE Connectivity's 1SET111005R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 17 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it offers reliable performance in various straight mounting setups.