Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DF22-3P-7.92DS(53)

Manufacturer

Hirose Electric
Manufacturer's Part Number

DF22-3P-7.92DS(53)
Description

POWER CONNECTOR;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

FSMLF327

Fox Electronics

FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.

Details

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

LM358M

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

2N2222A

ROHM

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;

Details

LM107H/883C

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;

Details

STM32F401CDY6TR

STMicroelectronics

STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

2N2222A

North American Philips Discrete Products Div

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MBR0540T1G

Onsemi

MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

1N4148

Vishay Intertechnology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Ksl Microdevices

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;

Details

ULN2803ADWR

Texas Instruments

ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

FDD5614P

Onsemi

FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

DF22-3P-7.92DS(53) Technical Details

TYPE	DESCRIPTION
Connector Type:	POWER CONNECTOR

Category Top Products

15-06-0100

Molex

Molex 15-06-0100 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE66 insulator. It has 10 contacts, operates b/w -40 to 105 °C, and offers high insulation resistance of 1G ohm. Ideal for commercial applications requiring reliable power connections in panels with solder termination.

31068-1011

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

93445-3202

Molex

The Molex 93445-3202 is a rectangular power connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, rated for 13A signal current, and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a female receptacle with crimp termination using RND PIN-SKT contact style.

1-178139-2

TE Connectivity

TE Connectivity 1-178139-2 is a rectangular power connector with 6 contacts, rated at 8A. Featuring glass-filled polyester insulator material, it offers high durability with 500 cycles. Ideal for board mounting applications, this connector has a max operating temperature of 105°C and min of -55°C.

350720-1

TE Connectivity

TE Connectivity's 350720-1 Power Connector features 0.25" Mating Contact Pitch, POLYAMIDE Insulator Material, and -55 to 105°C Operating Temperature range. Ideal for cable mounting applications, this connector has a total of 9 contacts and is UL certified for reliability in commercial settings.

39-29-9163

Molex

Molex 39-29-9163 is a rectangular power connector with 16 contacts, rated at 6A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings with operating temperatures ranging from -40°C to 105°C.

DF57H-2P-1.2V(21)

Hirose Electric

BOARD CONNECTOR; Contact Material: BRASS; JESD-609 Code: e3; Termination Contact Finish: TIN OVER NICKEL; Mating Contact Finish: NOT SPECIFIED;

1-1123824-1

TE Connectivity

TE Connectivity 1-1123824-1 is a RECTANGULAR POWER CONNECTOR with rated voltage of 250V and current of 8A. It has POLYAMIDE66 insulator, BRASS shell material, and operates b/w -25 to 105 °C. Ideal for board mounting applications requiring reliable power connections.

1-480763-0

TE Connectivity

TE Connectivity 1-480763-0 is a Power Connector with dimensions of 1.08" x 0.8" x 1.08". It has an Insulation Resistance of 100MΩ, operating temperature range from -55 to 105°C, and UL Flammability Code of 94V-2. Ideal for commercial applications requiring a durable female connector with crimp termination and natural insulator color.

FHP-03-02-T-S

Samtec

Samtec's FHP-03-02-T-S is a rectangular power connector with 3 female contacts. It features matte tin termination finish with nickel barrier and liquid crystal polymer insulator. Ideal for board mounting applications requiring reliable power connections.

170351-0003

Molex

The Molex 170351-0003 power connector features polyester insulator, operating temperatures from -40 to 105°C, and UL flammability rating of 94V-0. It has 2 contacts, crimp termination, and is ideal for cable mounting applications requiring a female blade pin-skt receptacle.

43025-0608

Molex

The Molex 43025-0608 is a rectangular power connector with 6 contacts, POLYAMIDE insulator, and 1000VAC dielectric voltage. It has a temperature range of -40 to 105°C and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable female connectors with hybrid contact style.

03-09-1027

Molex

Molex 03-09-1027 is a rectangular power connector with 0.54" x 0.25" x 1.03" dimensions, made of POLYAMIDE. It has UL 94V-2 flammability rating and features a receptacle body style for panel mounting. Ideal for commercial applications requiring reliable solder termination with locking mounting option.

1-640445-0

TE Connectivity

TE Connectivity 1-640445-0 is a rectangular power connector with 10 contacts, rated at 7A. Featuring a mating contact pitch of 0.156", it has an insulation resistance of 5Gohm and operates b/w -55°C to 105°C. Ideal for board mounting applications in commercial settings due to its durability and polarization key feature.

MPTC-02-16-02-01-03-L-RA-SD

Samtec

Samtec's MPTC-02-16-02-01-03-L-RA-SD is a rectangular power connector with 20 contacts, liquid crystal polymer insulator, and tin over nickel termination. It is used in commercial applications with operating temperatures ranging from -55°C to 125°C, featuring a right-angle mounting style for board installation.

39-01-3025

Molex

Molex 39-01-3025 is a rectangular power connector with POLYAMIDE insulator, suitable for commercial applications. Features include 2 contacts, 1000000000 ohm insulation resistance, and -40 to 105 °C operating temperature range. Ideal for cable mounting with crimp termination and locking mounting option.

1723104106

Molex

Molex 1723104106 Power Connector features Liquid Crystal Polymer insulator, UL 94V-0 flammability code, and male SQ pin-skt contact style. With dimensions of 0.956" x 0.352" x 0.614", it operates b/w -40°C to 105°C. Ideal for board mounting applications with 6 contacts and solder termination.

43045-0619

Molex

The Molex 43045-0619 is a rectangular power connector with insulation resistance of 1Gohm, dielectric voltage of 1000VAC, and operating temperature range from -40 to 105°C. It is used in board mounting applications for commercial reliability, featuring male contact gender and surface mount termination.

43045-1414

Molex

The Molex 43045-1414 is a rectangular power connector with 14 contacts, featuring a mating contact pitch of 0.118" and insulation resistance of 1G ohm. With a body length of 0.97", it is suitable for board mounting applications in temperatures ranging from -40 to 105°C.

2002411124

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;