Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ICL8038CCJD

Manufacturer

Harris Semiconductor
Manufacturer's Part Number

ICL8038CCJD
Description

SQUARE; TRIANGULAR; SINE; SAWTOOTH; PULSE; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

LM358N

Harris Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

1N4148

Terry Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

MMBT3904-7-F

Diodes Incorporated

Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

NDT2955

National Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

2N7002

Unisonic Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002

Rectron

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;

Details

ULN2803ADW

Texas Instruments

ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

ICL8038CCJD Technical Details

TYPE	DESCRIPTION
Package Body Material:	CERAMIC, GLASS-SEALED
Minimum Negative Supply Voltage (Vsup):	-5 V
Minimum Supply Voltage (Vsup):	5 V
Maximum Supply Current (Isup):	20 mA
Sub-Category:	Analog Waveform Generation Functions
Surface Mount:	NO
Terminal Finish:	Tin/Lead (Sn/Pb)
No. of Terminals:	14
Terminal Position:	DUAL
Package Style (Meter):	IN-LINE
Technology:	BIPOLAR
JESD-30 Code:	R-GDIP-T14
Package Shape:	RECTANGULAR
Terminal Form:	THROUGH-HOLE
Maximum Operating Temperature:	70 Cel
Package Code:	DIP
Nominal Supply Voltage (Vsup):	10 V
Nominal Negative Supply Voltage (Vsup):	-10 V
Maximum Output Frequency:	.1 GHz
JESD-609 Code:	e0
Minimum Operating Temperature:	0 Cel
Maximum Negative Supply Voltage (Vsup):	-15 V
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	DIP14,.3
Other IC type:	SQUARE; TRIANGULAR; SINE; SAWTOOTH; PULSE
Terminal Pitch:	2.54 mm
Temperature Grade:	COMMERCIAL
Maximum Supply Voltage (Vsup):	15 V
Power Supplies (V):	+-5,+-15

Category Top Products

TLC555CP

Texas Instruments

TLC555CP by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a supply voltage range of 2-15V and has a max output frequency of 1.2 GHz. Ideal for applications requiring pulse generation in commercial temperature environments.

LM566CN

National Semiconductor

LM566CN by National Semiconductor is an Analog Waveform Generation IC with a Nominal Voltage of 12V, Max Output Frequency of 0.5GHz, and Power Supplies of +-6V. It is used for generating SQUARE and TRIANGULAR waveforms in applications requiring precise frequency control within the temperature range of 0-70°C.

NE555PWRE4

Texas Instruments

NE555PWRE4 by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies of 5/15V. It is used for pulse generation in commercial temperature range applications.

933602780602

NXP Semiconductors

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

ICM7242C/D

Maxim Integrated

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIE; Package Shape: RECTANGULAR; Surface Mount: YES;

LMC555ENG

Texas Instruments

LMC555ENG by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating at 5V nominal voltage. It offers a max output frequency of 3 GHz and can function in temperatures ranging from -40 to 85 °C. Ideal for industrial applications requiring CMOS technology and precise pulse generation.

SE555CDR

Texas Instruments

SE555CDR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating b/w -55 to 125°C. It has a supply voltage range of 4.5V to 16V and comes in a small outline rectangular package suitable for military-grade applications. The IC supports pulse and rectangular waveforms, making it ideal for various signal generation tasks.

NE555PE4

Texas Instruments

NE555PE4 by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies at 5/15V. It has a temperature range of 0-70°C and uses BIPOLAR technology. Commonly used for pulse generation in various electronic applications.

SA555DT

STMicroelectronics

SA555DT by STMicroelectronics is an Analog Waveform Generation IC with a 0.5 GHz max output frequency and 8 terminals. Operating b/w -40 to 105°C, it has a supply voltage range of 4.5-16V, making it ideal for industrial applications requiring precise pulse generation in compact designs.

LM556CJ

National Semiconductor

LM556CJ by National Semiconductor is a dual-function analog waveform generator with 14 terminals. It operates on a nominal voltage of 5V and has power supplies of 5/15V. With a package style of IN-LINE, it is ideal for commercial applications requiring bipolar technology and temperature range of 0-70°C.

HA17555-E

Renesas Electronics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL EXTENDED; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

933925160602

NXP Semiconductors

PULSE; RECTANGULAR; Temperature Grade: INDUSTRIAL; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

NE555/D

General Electric Solid State

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;

TLC556INE4

Texas Instruments

TLC556INE4 by Texas Instruments is a dual-function analog waveform generator with a max output frequency of 1.2 GHz. It operates within a wide temperature range (-40 to 85 °C) and supports supply voltages from 2V to 15V, making it ideal for industrial applications requiring precise waveform generation in compact designs.

NE555N

Signetics

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

MC1455P1G

Onsemi

MC1455P1G by Onsemi is an Analog Waveform Generation IC with Vsup of 4.5-16V, operating temp range of 0-70°C, and package style IN-LINE. It is used for pulse generation in commercial applications requiring a supply voltage of 5V or 15V.

SE555JGB

Texas Instruments

SE555JGB by Texas Instruments is an Analog Waveform Generation IC with 8 terminals and a supply voltage range of 4.5V to 18V. It operates in temperatures from -55°C to 125°C, making it suitable for military-grade applications. With a max supply current of 12mA, this IC is ideal for pulse and rectangular waveform generation in various electronic circuits.

TLC556CDR

Texas Instruments

TLC556CDR by Texas Instruments is a dual-function analog waveform generator with a max output frequency of 1.2 GHz, suitable for applications requiring precise timing control. It operates on a nominal voltage of 5 V and supports surface mount installation, making it ideal for compact electronic devices in commercial temperature environments.

MC1455P1DS

Motorola

MC1455P1DS by Motorola is an analog waveform generator with 8 terminals and a rectangular plastic/epoxy package. It operates at temperatures ranging from 0 to 70 °C and requires power supplies of 5/15V. This device is commonly used in commercial applications for generating precise waveforms.

ICM7555ESA+T

Maxim Integrated

SQUARE; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;