Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M23053/5-103-9

Manufacturer

Dunbar Products
Manufacturer's Part Number

M23053/5-103-9
Description

ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
Datasheet

Not In Stock

Popular Products

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

BAV99

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

LL4148

Transys Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

STMicroelectronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

Details

LM317T

Bay Linear

Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

LAN8720AI-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

STM32H743XIH6

STMicroelectronics

STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;

Details

M23053/5-103-9 Technical Details

TYPE	DESCRIPTION
Construction:	SINGLE WALL
MIL Conformity:	NO
Jacket Material:	CROSSLINKED POLYOLEFIN
Connector Accessory Type:	ASSEMBLY ITEMS
Assembly Item Name:	TAPER SLEEVE
IEC Conformity:	NO
DIN Conformity:	NO

Category Top Products

13697414

Aptiv

Aptiv 13697414 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0551-0.0748 inch cable entry. Ideal for automotive wiring harness assemblies due to its precise crimping and compatibility with specified cable types.

1-583616-0

TE Connectivity

TE Connectivity 1-583616-0 CONTACT features CRIMP terminals for wire sizes 28-24 AWG, rated at 5A current. Suitable for POWER AND SIGNAL applications with operating temperatures from -40 to 85°C. Ideal for assemblies requiring FEMALE contacts with 0.24 mm2 cross-section area.

M23053/5-103-9

Alpha Wire

ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;

50148-8100

Molex

CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; IEC Conformity: NO;

8599-0720-900

Souriau

CONNECTOR ACCESSORY;

1534805-1

TE Connectivity

TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.

02-09-1104

Molex

Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.

5-1532137-9

TE Connectivity

CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Manufacturer Series: 1532137; DIN Conformity: NO; Assembly Item Name: JACKPOST KIT;

1727040100

Molex

Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.

WP-4P

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Usage: DTP SERIES; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: WEDGE LOCK;

0413-204-2005

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; MIL Conformity: NO;

13697408

Aptiv

Aptiv 13697408 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.0551-0.0748 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.

1766245-1

TE Connectivity

TE Connectivity's 1766245-1 is a male power contact with solder terminal type, rated for 35A current. Made of brass, it has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting with wire sizes up to 0 AWG.

39-00-0217

Molex

Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.

1-640415-1

TE Connectivity

TE Connectivity 1-640415-1 is a nylon plug housing with -55 to 105 °C operating temp range. It's used for keying plugs and supports up to 0 AWG wire size, ideal for assembly applications.

830009502

Molex

CONNECTOR ACCESSORY;

030-2409-003

Itt Cannon

ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.

5011933000

Molex

Molex 5011933000 is a crimp terminal contact designed for signal applications. It supports wire sizes from 32 AWG to 28 AWG and is made of phosphor bronze. Its female gender makes it suitable for various assembly products in the electronics industry.

1-968855-1

TE Connectivity

TE Connectivity's 1-968855-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for power applications, it has a temperature range of -40 to 130°C and accommodates cables from 0.051" to 0.083".

SPAL-001T-P0.5

J S T Mfg

SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.