Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LTC4376IDHD#PBF

Manufacturer

Analog Devices
Manufacturer's Part Number

LTC4376IDHD#PBF
Description

BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVSON; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

2N7002

Weitron Technology

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

2N2222A

Transistor & Electronic

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

LM358AN

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

TM4C1294NCPDTI3

Texas Instruments

TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.

Details

LM7805CT

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148WS

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

Details

BAV99

Philips Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;

Details

1N4148

Philips Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

M24308/2-1F

Souriau

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

LTC4376IDHD#PBF Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	12 V
Maximum Seated Height:	.8 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE
Technology:	CMOS
JESD-30 Code:	R-PDSO-N16
Package Shape:	RECTANGULAR
Terminal Form:	NO LEAD
Built-in Protections:	TRANSIENT
Maximum Operating Temperature:	85 Cel
Package Code:	HVSON
Interface IC Type:	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Width:	4 mm
Turn-off Time:	.5 us
Output Polarity:	TRUE
Input Characteristics:	STANDARD
Driver No. of Bits:	1
Maximum Supply Voltage:	40 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	SOLCC16,.16,20
Output Current Flow Direction:	SINK
Length:	5 mm
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

NCV8405ASTT1G

Onsemi

NCV8405ASTT1G by Onsemi is a small outline peripheral driver with AEC-Q100 screening for automotive applications. It features built-in protections against transient, over current, and over voltage conditions. With a nominal output peak current limit of 10.5A and sink flow direction, it is ideal for buffer or inverter based interface ICs.

BTT60101ERBXUMA1

Infineon Technologies

BTT60101ERBXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at a max supply voltage of 36V and nominal output peak current limit of 9A. Ideal for applications requiring buffer or inverter based peripheral drivers in automotive electronics due to AEC-Q100 screening level.

IRS21844MTRPBF

International Rectifier Hirel Products

HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE;

SI9986CY-T1-E3

Vishay Intertechnology

SI9986CY-T1-E3 by Vishay Intertechnology is a half bridge peripheral driver with 4.5V nominal voltage, operating b/w 0-70°C. It supports source and sink output current flow direction, ideal for commercial applications requiring a compact design with a terminal pitch of 1.27mm.

IRS2113STRPBF

Infineon Technologies

IRS2113STRPBF by Infineon Technologies is a 16-terminal peripheral driver with a supply voltage range of 10-20V. It offers built-in transient and under voltage protections, making it ideal for automotive applications. With a turn-on time of 0.16us and turn-off time of 0.15us, this CMOS technology-based IC provides source and sink output current flow direction.

VNQ660SP

STMicroelectronics

VNQ660SP by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max output current of 6A and turn-on time of 70μs. Ideal for applications requiring high-current switching in automotive systems.

SZNUD3124DMT1G

Onsemi

SZNUD3124DMT1G by Onsemi is a MOS technology peripheral driver with AEC-Q101 screening. It features a small outline, thin profile package style and can handle up to 200mA supply current at 28V. Ideal for applications requiring transient protection and sink output current flow direction in automotive electronics.

BSP742R

Infineon Technologies

BSP742R by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages of 5-34 V and has a turn-on time of 140 us. Ideal for automotive applications requiring buffer or inverter based peripheral drivers.

TPS27081ADDCR

Texas Instruments

TPS27081ADDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V. It has built-in transient protection and operates in an industrial temperature range. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.

AD5751ACPZ-REEL7

Analog Devices

AD5751ACPZ-REEL7 by Analog Devices is a surface mount peripheral driver with a max supply voltage of 5.5V. It has built-in protections against over current and is suitable for industrial applications requiring a nominal voltage of 3V and an output peak current limit of 0.015A.

BTT60302ERAXUMA1

Infineon Technologies

BTT60302ERAXUMA1 by Infineon Technologies is a Peripheral Driver with 2 functions, suitable for automotive applications. It offers built-in protections against transient, over current, and over voltage events. With a max supply voltage of 36V and turn-on/off time of 150us, it ensures reliable performance in various automotive systems.

DS2482S-100/T&R

Maxim Integrated

DS2482S-100/T&R by Maxim Integrated is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and is ideal for industrial applications requiring buffer or inverter-based interface ICs in compact designs.

VN808TR-32-E

STMicroelectronics

STMicroelectronics' VN808TR-32-E is a peripheral driver with 8 functions, operating at 10.5-32V, suitable for automotive applications. It offers built-in protections against transient events, thermal issues, and under-voltage conditions. With a max output current of 0.5A and fast turn-on/off times of 100/150us, it is ideal for driving various loads in automotive systems.

BTS4175SGA

Infineon Technologies

BTS4175SGA by Infineon Technologies is a peripheral driver with 8 terminals, offering built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 6V to 13.5V and has a max supply voltage of 52V. This rectangular-shaped device is ideal for applications requiring a small outline package style and sink output current flow direction.

TPS2H160BQPWPRQ1

Texas Instruments

TPS2H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver feature.

BTS716GB

Infineon Technologies

BTS716GB by Infineon Technologies is a peripheral driver with 4 functions, built-in protections for transient, over current, over voltage, and thermal issues. It operates at supply voltages ranging from 5.5V to 12V and has a max supply voltage of 40V. This rectangular-shaped device in small outline package style is ideal for applications requiring a nominal output peak current limit of 5.3A and turn-on/off times of 250/270µs.

BTS5210GXUMA1

Infineon Technologies

BTS5210GXUMA1 by Infineon is a peripheral driver with 2 functions, operating at 5.5-40V. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a small outline package style and sink output current flow direction.

FPF2702MPX

Onsemi

FPF2702MPX by Onsemi is a peripheral driver with a supply voltage range of 2.8-36V, built-in protections for over current, thermal, and under voltage. It features 8 terminals in a small outline package suitable for industrial applications requiring source output current flow direction.

NCV8402ADDR2G

Onsemi

NCV8402ADDR2G by Onsemi is a peripheral driver with 2 functions, AEC-Q101 screening level, and built-in protections for transient, over current, over voltage, and thermal issues. It has a max output current of 2A and is suitable for military-grade applications requiring buffer or inverter based peripheral drivers. Operating temperature ranges from -55 to 150°C.

ITS711L1XT

Infineon Technologies

ITS711L1XT by Infineon Technologies is a peripheral driver with built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. This small outline package IC is ideal for buffer or inverter based applications requiring source and sink output current flow direction.