Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LT1963EST-3.3#PBF

Manufacturer

Analog Devices
Manufacturer's Part Number

LT1963EST-3.3#PBF
Description

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
Datasheet

Datasheet

Not In Stock

Popular Products

MMSZ5245BT1G

Onsemi

MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.

Details

SMBJ18CA

Onsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720AI-CP-TR

Microchip Technology

LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

M/a-com Technology Solutions

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Semiconductor Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2003ADR

Texas Instruments

ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

DS18B20Z+T&R

Maxim Integrated

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;

Details

LT1963EST-3.3#PBF Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Line Regulation:	.01 %
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.8 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Terminal Finish:	MATTE TIN
No. of Outputs:	1
Maximum Output Current-1:	1.5 A
No. of Terminals:	3
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
Technology:	BIPOLAR
Maximum Load Regulation:	.035 %
JESD-30 Code:	R-PDSO-G3
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Nominal Output Voltage-1:	3.3 V
Operating Temperature (TJ-Max):	125 Cel
Package Code:	SOP
Qualification Status:	Not Qualified
Width:	3.505 mm
Maximum Dropout Voltage-1:	.55 V
Maximum Input Voltage Absolute:	20 V
Moisture Sensitivity Level (MSL):	1
Minimum Input Voltage:	3.8 V
Maximum Output Voltage-1:	3.4 V
Maximum Input Voltage:	20 V
Minimum Output Voltage-1:	3.2 V
JESD-609 Code:	e3
Maximum Voltage Tolerance:	3 %
No. of Functions:	1
Package Equivalence Code:	SOT-223
Nominal Dropout Voltage-1:	.34 V
Operating Temperature (TJ-Min):	-40 Cel
Length:	6.505 mm
Adjustability:	FIXED
Peak Reflow Temperature (C):	260
Terminal Pitch:	2.3 mm

Category Top Products

LP2950CDT-5.0

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;

LT1129IST-3.3#PBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 3.03 %;

MIC5504-3.3YM5

Microchip Technology

MIC5504-3.3YM5 by Microchip Technology is a CMOS LDO regulator with 3.3V output, 0.3A max current, and 0.04% load regulation. Ideal for applications requiring a compact, low-profile fixed positive single output regulator with a small footprint and surface-mount capability.

REG1117-3.3

Texas Instruments

REG1117-3.3 by Texas Instruments is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.2 V. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.

LP2980IM5-2.5/NOPB

Texas Instruments

LP2980IM5-2.5/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 2.5V Nominal Output Voltage, 0.05A Max Output Current, and 125°C Max Operating Temperature. Ideal for applications requiring stable voltage regulation in compact electronic devices.

LP5912-3.3DRVT

Texas Instruments

LP5912-3.3DRVT by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, heat sink/slug, very thin profile, ideal for surface mount designs with limited space constraints.

LM1117IMPX-3.3/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;

NCP694D33HT1G

Onsemi

NCP694D33HT1G by Onsemi is a Fixed Positive Single Output LDO Regulator with 3.3V Nominal Output Voltage, 0.3A Max Output Current, and 85°C Max Operating Temperature. It is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and low dropout voltage of 0.1V.

ADP3339AKCZ-3.3-R7

Analog Devices

ADP3339AKCZ-3.3-R7 by Analog Devices is a fixed positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.48V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery-powered devices.

TPS7A2533DRVR

Texas Instruments

TPS7A2533DRVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.3A. It operates in an input voltage range of 3.8V to 18V, making it suitable for various applications requiring stable power supply such as IoT devices and consumer electronics. With a compact package style and low dropout voltage, this regulator offers efficient performance in space-constrained designs.

NCV2931AZ-5.0G

Onsemi

NCV2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.1 A and a dropout voltage of 0.6 V. It is commonly used in automotive applications due to its AEC-Q100 screening level and wide operating temperature range (-40°C to 125°C).

LD1117V33C

STMicroelectronics

LD1117V33C by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a dropout voltage of 1.3V. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

NCP1117DT50RKG

Onsemi

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;

REG1117-5/2K5

Burr-Brown Corporation

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 2 %; JESD-30 Code: R-PDSO-G4;

MCP1804T-5002I/DB

Microchip Technology

MCP1804T-5002I/DB by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage, 1.3V max dropout voltage, and 0.15A max output current. It is ideal for applications requiring stable voltage regulation in a compact package, such as automotive electronics or industrial control systems.

NCV4269AD250R2G

Onsemi

NCV4269AD250R2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V, suitable for applications requiring stable voltage regulation in automotive environments. It operates within a temperature range of -40 to 125°C, making it ideal for various electronic systems that demand reliable power management with minimal load and line regulation. The package style is small outline (SO) with gull wing terminals, facilitating surface mount assembly for compact designs.

MIC39100-5.0WS-TR

Microchip Technology

MIC39100-5.0WS-TR by Microchip is a Fixed Positive Single Output LDO Regulator with 1A max output current, 5V nominal output voltage, and 2% voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its small outline package style and low dropout voltage of 0.41V at 1A load.

LP2981AIM5-5.0/NOPB

Texas Instruments

LP2981AIM5-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.375V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.

TPS73733DRVR

Texas Instruments

TPS73733DRVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs that demand high performance and reliability.

TPS7A1650QDGNRQ1

Texas Instruments

TPS7A1650QDGNRQ1 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications due to its AEC-Q100 screening level certification. The package style is small outline with gull wing terminals, ideal for surface mount assembly.