Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

AT62-203-12141

Manufacturer

Amphenol
Manufacturer's Part Number

AT62-203-12141
Description

CONNECTOR ACCESSORY;
Datasheet

Datasheet

Not In Stock

Popular Products

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0805C104K5RACTU

KEMET Corporation

KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AH180-WG-7

Diodes Incorporated

AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.

Details

MBR0520LT1

Motorola

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Hy Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

AT62-203-12141 Technical Details

TYPE	DESCRIPTION
Connector Accessory Type:	CONNECTOR ACCESSORY

Category Top Products

56134-9100

Molex

Molex 56134-9100 CONTACT features CRIMP terminal type, 0.0354" min cable entry, and COPPER ALLOY material. Ideal for 51242, 51382, 51353 SERIES applications requiring FEMALE contact gender and SQUARE PIN-SOCKET style. Supports wire sizes from 28 AWG to 22 AWG with 0.067" max cable entry.

221-513/000-004

Wago

TERMINAL BLOCK ACCESSORY;

CC79L-2630-01-L

Samtec

Samtec CC79L-2630-01-L CONTACT features 10µ finish thickness, LOOSE design for 26-30 AWG wire. Made of PHOSPHOR BRONZE, ideal for Assembly Products applications.

5748676-1

TE Connectivity

TE Connectivity 5748676-1 is a zinc alloy BACKSHELL with shielding, suitable for PLUG/RECEPTACLE applications. It supports cable entry from 0.185" to 0.32", operating in temperatures from -55°C to 105°C. Mounting options include #4-40 screws and it accommodates up to 0 AWG wire size.

1053002200

Molex

Molex 1053002200 is a NANO-FITTM receptacle housing with 15 finish thickness. It features crimp terminal type, rated for 300V AC and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with female contact gender and compression style.

3164001

Abl Sursum Bayerische Elektrozubehor & Kg

CONNECTOR ACCESSORY; Material: PLASTIC; IEC Conformity: NO; Additional Features: IP44; LOW PROFILE; Usage: CEE CONNECTOR; DIN Conformity: NO;

249-117

Wago

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: END STOP; MIL Conformity: NO;

AT62-201-20141

Amphenol

CONNECTOR ACCESSORY;

2002-1492

Wago

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END PLATE; MIL Conformity: NO; IEC Conformity: NO;

M80-0130005

Harwin Plc

The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.

3001

Keystone Electronics

CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: BATTERY CONTACT; Terminal Type: SOLDER; Material: PHOSPHOR BRONZE;

1731110062

Molex

Molex 1731110062 is a zinc alloy backshell for FCT D-SUB size 3 connectors. It can operate in temperatures ranging from -35°C to 100°C. Mounting options include #4-40 screws, making it ideal for industrial applications.

776364-1

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;

MTCB1X-XXX-105

TE Connectivity

CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Wire Size: 0 AWG;

DZ5CE003

Schneider Electric Sa

DZ5CE003 by Schneider Electric Sa is a plastic ferrule with approvals for NFC and UL. It can handle temperatures from -20 to 105°C, suitable for wire sizes up to 24 AWG. Ideal for electrical assemblies requiring reliable copper connectors in various applications.

16-02-0108

Molex

CONNECTOR ACCESSORY;

114017-ZZ

TE Connectivity

CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Assembly Item Name: SEALING ITEM; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; MIL Conformity: NO;

AT60-202-16141

Amphenol

CONNECTOR ACCESSORY;

W12S-P012

TE Connectivity

TE Connectivity's W12S-P012 is a POWER AND SIGNAL WEDGE LOCK with max. operating temp of 125°C and min. of -55°C. Supports wire size up to 0 AWG, made of POLYBUTYLENE TEREPHTHALATE. Ideal for assembly applications requiring secure power and signal connections in various environments.

DF3-2428SCF

Hirose Electric

DF3-2428SCF by Hirose Electric is a FEMALE CONTACT with CRIMP terminal type. It features BELLOWED contact style, made of PHOSPHOR BRONZE material. With STRAIGHT mounting style and 0.108" terminal length, it's ideal for assembly products requiring 39.4 finish thickness.