Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

5479CSL002

Manufacturer

Alpha Wire
Manufacturer's Part Number

5479CSL002
Description

WIRE AND CABLE; Rated Voltage: 300 V; Shielding: YES; No. of Conductors: 18; Conductor Finish: TIN; Construction: STRANDED;
Datasheet

Datasheet

Not In Stock

Popular Products

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

LM358AN

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SS14

Rugao Dachang Electronic

RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;

Details

DS18B20Z/T&R

Maxim Integrated

DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.

Details

LM7805CT

Onsemi

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

1N4148

Hy Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

LL4148-GS08

Telefunken Microelectronics

RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

RN41N-I/RM

Microchip Technology

Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Semitronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

5479CSL002 Technical Details

TYPE	DESCRIPTION
Other Names:	5479C SL002-ND 5479CSL002
Wire Gauge (AWG):	24
Construction:	STRANDED
Jacket Material:	POLYVINYLCHLORIDE
Shielding:	YES
Minimum Operating Temperature:	-20 Cel
Rated Voltage:	300 V
Cross Section Area:	.205 mm2
Conductor Finish:	TIN
Resistance:	.085 ohm
Length:	152.4 mm
Wire & Cable Name:	COMMUNICATION AND CONTROL CABLE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	POLYVINYLCHLORIDE
No. of Conductors:	18
Conductor Material:	COPPER ALLOY
Maximum Operating Temperature:	80 Cel
Stranding:	7X32
Diameter:	9.19 mm

Category Top Products

AA59569R36T0500

Allied Wire & Cable

WIRE AND CABLE;

9451010U1000

Belden

Wires and Cables;

82A0111-26-9

TE Connectivity

TE Connectivity's 82A0111-26-9 is a SINGLE WALL cable with 600V rating, TIN finish, and COPPER ALLOY conductor. With -65 to 150 °C operating range, it's ideal for FLEXIBLE CORD AND FIXTURE WIRE applications requiring 26 AWG wire gauge and SPEC 80 cable types.

800032

Prysmian

Prysmian 800032 is a stranded power cable with shielding, rated for 1000V. It features EP rubber insulation and tinned copper conductors suitable for fixed installations in power, control, and lightning systems. With a max operating temperature of 90°C, it meets IEC approvals.

21380

Helukabel

Helukabel 21380 is a control cable with CE and UL approvals, made of polyurethane jacket material. It has a rated voltage of 600V, suitable for offshore applications. With a temperature range from -40 to 80°C, it features bare copper conductor material and a cross-section area of 70mm2.

3081RD001

Alpha Wire

Alpha Wire 3081RD001 is a flexible cord with 10 AWG copper alloy conductor, rated at 600V. Featuring PVC insulation, it operates b/w -40 to 105°C and has approvals from CE, CSA, and UL. Ideal for electrical applications requiring durable stranded wires with a cross-section area of 5.261 mm2.

44A0111-28-96

TE Connectivity

TE Connectivity's 44A0111-28-96 is a flexible cord and fixture wire with 600V rated voltage, TIN conductor finish, and PVDF insulator. Ideal for applications requiring a temperature range of -65 to 150°C, this wire features copper alloy conductors in 28 AWG size.

55A0111-22-90

TE Connectivity

TE Connectivity's 55A0111-22-90 cable is a stranded wire with tin finish, rated at 600V. With a conductor made of copper alloy and 22 AWG gauge, it operates b/w -65 to 150°C. Ideal for general purpose and lightweight applications, this flexible cord has a diameter of 1.09mm and cross-section area of 0.38 mm2.

VHA00009-1M

L-com

CABLE ASSEMBLY;

44A0111-20-6-US

TE Connectivity

WIRE AND CABLE;

982670431

Molex

CABLE ASSEMBLY; Shielding: NO; No. of Conductors: 26;

2273114-4

TE Connectivity

TE Connectivity 2273114-4 is a 22 AWG communication cable with rated voltage of 125V and current of 4A. Operating temperature ranges from -50 to 80°C, making it suitable for various electrical applications requiring reliable signal transmission. Its straight mounting style and compact diameter of 5mm make installation easy in tight spaces.

P006-020

Tripp Lite

CABLE ASSEMBLY;

1233160005

Weidmueller & Kg

Weidmueller & Kg's 1233160005 is a stranded communication cable with shielding, PE insulator, and copper alloy conductor. It has approvals from ANSI, CUL, EN, IEC, UL for applications requiring RJ45 connectors and operating temperatures b/w -20 to 60°C.

TAA75AA5501-001

TE Connectivity

TE Connectivity's TAA75AA5501-001 is a shielded communication cable with 22 AWG copper alloy conductor, rated for 60V and 4A. With a diameter of 6.9mm, it is suitable for applications requiring reliable signal transmission in electrical systems.

3600B/68

3m Electronic Products Division

3600B/68 by 3m Electronic Products Division is a flexible cord and fixture wire with 68 conductors of tinned copper. It has a rated voltage of 50V, UL and CUL approvals, and features stranded construction with PVC jacket for shielding. Ideal for electrical applications requiring flexibility and durability.

2249-C-60

Pomona Electronics

Pomona Electronics 2249-C-60 is a solid construction shielded communication cable with BNC male connectors on both sides. It has a rated voltage of 500V, max operating temp of 50°C, and diameter of 4.95mm. Ideal for high-frequency signal transmission in various electrical applications.

444031A10M010

Molex

CABLE ASSEMBLY;

3580/24SL005

Alpha Wire

WIRE AND CABLE;

PXP6040/A/3M00

Bulgin

The Bulgin PXP6040/A/3M00 is a UL-approved communication cable with PVC jacket, 4 conductors, and USB A male to USB B male connectors. It has a rated voltage of 30V, current of 1A, and operates b/w 0-70°C. Ideal for data transfer applications requiring a compact 0.08mm2 cross-section area.