Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

APS13291KLHALT

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

APS13291KLHALT
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Maximum Supply Voltage: 24 V;
Datasheet

Datasheet

Not In Stock

Popular Products

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

M24308/2-1F

Esterline Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

Details

1N4148

ROHM

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

New Jersey Semiconductor Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

NE555DR

Texas Instruments

NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Secos

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Microchip Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;

Details

MBR0530T1G

Onsemi

MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.

Details

SMBJ18CA

Fagor Electronica S Coop

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M24308/2-1F

Defense Logistics Agency

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;

Details

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

APS13291KLHALT Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.8 V
Other Names:	620-1981-6 620-1981-2 620-1981-ND 620-1981-1 620-1981
Maximum Operating Current:	3 mA
Maximum Supply Voltage:	24 V
Output Type:	VOLTAGE OUTPUT
Mounting Feature:	SURFACE MOUNT
Body Width:	1.91 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Output Interface Type:	3-WIRE INTERFACE
Body Height:	1 mm
Additional Features:	SHORT CIRCUIT PROTECTION
Body Length/Diameter:	2.98 mm
Hysteresis:	10 mT

Category Top Products

DRV5055A2ELPGQ1

Texas Instruments

DRV5055A2ELPGQ1 by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.63V and operating temperature from -40°C to 150°C. It features an output range of -1-1mA, making it ideal for automotive applications requiring precise analog current outputs in harsh environments compliant with AEC-Q100 standards.

SS495A2-L

Honeywell Sensing And Control

SS495A2-L by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 1.57" body width, and 3mm body height. It features a transistor output circuit type and operates b/w -40 to 150°C. Ideal for applications requiring precise sensing of magnetic fields in industrial automation and automotive systems.

HAL880UT-K

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1.0-1.0mA; Body Height: 5.05 mm;

TLE49643KXTSA1

Infineon Technologies

TLE49643KXTSA1 by Infineon is a Hall effect magnetic field sensor with 3mT hysteresis, 0-25mA output range, and 32V max supply voltage. AEC-Q100 screened for automotive applications, it features an open-drain current output suitable for detecting magnetic fields in the range of 6.1-16.6mT.

DRV5033FAEDBZRQ1

Texas Instruments

DRV5033FAEDBZRQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 1.5 mT, operating voltage range from 2.7V to 38V, and AEC-Q100 screening level. It is ideal for automotive applications due to its omnidirectional input mode, digital output type, and wide magnetic field range of -0.5mT to 6mT.

SS360PT

Honeywell Sensing And Control

SS360PT by Honeywell is a magnetic field sensor with a supply voltage range of 3-16V. It operates in temperatures from -40 to 125°C, with a max current output of 10mA. Ideal for applications requiring precise magnetic field detection in compact spaces, it features a rectangular shape and surface mounting feature.

BIM-UNTK-AP7X-0.3M-PSG3M

Hans Turck & Kg

BIM-UNTK-AP7X-0.3M-PSG3M by Hans Turck & KG is a MAGNETIC FIELD SENSOR with PNP output, suitable for applications requiring magnetic field detection. It operates b/w -25°C to 70°C, with a supply voltage range of 10V to 30V and max current of 100mA. The sensor has a rectangular shape, measuring 22.7mm x 5 inch x 6 mm, housed in plastic with a connector termination type.

S-5716ACDL1-M3T1U

Seiko Instruments Usa

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.40-4.60V; Terminal Finish: TIN;

AH3363Q-SA-7

Diodes Incorporated

Diodes Inc. AH3363Q-SA-7 is a magnetic field sensor with 28V max supply, AEC-Q100 screening, and 2mT hysteresis. Ideal for automotive applications due to its Hall effect technology, -40 to 150°C operating range, and 7.2mT max magnetic field detection capability.

BU52011HFV-TR

ROHM

ROHM's BU52011HFV-TR is a magnetic field sensor with 1.65-3.3V supply voltage range, 0.9mT hysteresis, and 0.20-1.60V output range. Ideal for applications requiring Hall effect sensors in a compact rectangular package with surface mounting feature.

HAL506UA-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA;

EQ-730L

Asahi Kasei Microdevices

EQ-730L by Asahi Kasei Microdevices is a Hall effect magnetic field sensor with 3-5.5V supply, -40 to 100°C operating temp, and 1A max output current. Ideal for applications requiring precise analog current output in a compact rectangular plastic housing.

ACS70311LKTATN-001B5-C

Allegro MicroSystems

Allegro MicroSystems' ACS70311LKTATN-001B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and 1mV/G sensitivity. Ideal for automotive applications due to AEC-Q100 screening level and push-pull analog voltage output interface.

ACS717KMATR-10B-T

Allegro MicroSystems

Allegro MicroSystems' ACS717KMATR-10B-T is a magnetic field sensor with 3-3.6V supply, -40 to 125°C temp range, and 7.5mA max current. Ideal for voltage output applications in automotive and industrial sectors due to its Hall effect technology and surface mounting feature.

SS360NT

Honeywell Sensing And Control

SS360NT by Honeywell is a magnetic field sensor with 24V max supply voltage, 6mT hysteresis, and -40 to 150°C operating temperature range. Ideal for detecting magnetic fields in various applications like automotive, industrial automation, and robotics due to its digital current output type and compact rectangular design.

AA002-02E

Nve

Nve's AA002-02E is a MAGNETIC FIELD SENSOR with 24V max supply, -50 to 125°C operating temp range, and 0.15-1.05 mT magnetic field range. Ideal for applications requiring ANALOG VOLTAGE output, such as surface mount installations in compact spaces.

US5781LSE-AAA-000-RE

Melexis N V

Melexis N V's US5781LSE-AAA-000-RE is a magnetic field sensor with 3.5V to 24V supply voltage range, -40°C to 150°C operating temperature, and 5mA max current output. Ideal for applications requiring precise Hall effect sensing in compact spaces.

MMC5883MA

Memsic

MMC5883MA by Memsic is a MAGNETIC FIELD SENSOR with 2.16-3.6V supply voltage range and -40 to 85°C operating temperature. It offers a digital voltage output interface, ideal for surface mount applications in various industries. Measuring 3x3mm, this sensor provides an output range of 0.36-1.44V for precise magnetic field detection.

OMH3150S

Tt Electronics Plc

OMH3150S by Tt Electronics Plc is a Hall effect magnetic field sensor with 3 terminals. It operates b/w -40 to 150°C, outputting analog voltage in the range of 2.25-2.75V at a max current of 10mA. With a max supply voltage of 6V and housing in ceramic, it's ideal for applications requiring precise magnetic field detection.

DRV5056A1QDBZR

Texas Instruments

DRV5056A1QDBZR by Texas Instruments is a magnetic field sensor with an output range of -1-1mA and analog current output type. It operates b/w -40 to 125°C, suitable for various applications requiring precise magnetic field detection. With a max supply voltage of 3.6V and compact rectangular package style, it is ideal for surface mount installations in electronic devices.