Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DRV5053VAQLPGM

Manufacturer

Texas Instruments
Manufacturer's Part Number

DRV5053VAQLPGM
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 0-2V; Terminal Finish: Matte Tin (Sn);
Datasheet

Datasheet

Not In Stock

Popular Products

LM358AN

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

SS14+

Multicomp Pro

SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

DS18B20Z+

Analog Devices

DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBRS3200T3G

Onsemi

MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.

Details

SSL-LXA228SRC-TR11

Lumex

SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

LL4148

Leshan Radio

RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;

Details

1N4148

Wuxi Xuyang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CMX

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM555CN

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS123,215

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;

Details

DRV5053VAQLPGM Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.5 V
Maximum Operating Current:	3.6 mA
Maximum Supply Voltage:	38 V
Output Range:	0-2V
Output Type:	ANALOG VOLTAGE
Maximum Output Current:	2.3 A
Housing:	PLASTIC
Terminal Finish:	Matte Tin (Sn)
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Body Width:	1.52 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Shape or Style:	RECTANGULAR
Termination Type:	SOLDER
Input Mode:	BIPOLAR
Linearity (%):	1
Body Height:	5.05 mm
Additional Features:	OUTPUT SHORT-CIRCUIT PROTECTION; REVERSE SUPPLY PROTECTION; IT HAS SENSITIVITY -90 MV/MT AND OUTPUT CURRENT 300 MICROAMP
Body Length/Diameter:	4 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

A1104EUA-T

Allegro MicroSystems

Allegro MicroSystems' A1104EUA-T is a Hall effect magnetic field sensor with 3 terminals, voltage output, and 24V max supply. With a hysteresis of 5.5mT and operating range up to 45mT, it's ideal for automotive applications requiring AEC-Q100 screening at temperatures from -40°C to 85°C.

A1250LLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A1250LLHLX-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and hysteresis of 10mT. Ideal for automotive applications due to AEC-Q100 screening level and ISO-26262 compliance. Outputs current in the range of 30-60mA with non-inverting polarity.

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

ALS31000LLHALX

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Terminal Finish: TIN; Minimum Operating Temperature: -40 Cel;

TLE49462LHALA1

Infineon Technologies

TLE49462LHALA1 by Infineon is a magnetic field sensor with 18V max supply voltage, 4mT hysteresis, and 6mA max operating current. Ideal for applications requiring digital current output in a plastic housing, such as automotive systems, industrial automation, and consumer electronics.

DRV5055A4QLPG

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: -1-1mA; Minimum Operating Temperature: -40 Cel;

TLE493DW2B6A0HTSA1

Infineon Technologies

TLE493DW2B6A0HTSA1 by Infineon is a magnetic field sensor with 2.8-3.5V supply, -40 to 125°C operating temp range, and 160-230mT magnetic field range. It uses I2C interface for digital voltage output in applications like automotive and industrial sensing.

TLV49644TBXALA1

Infineon Technologies

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: CURRENT OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0-25mA; Maximum Magnetic Field Range: 13.5 mT;

ACS70310LKTATN-001B5-C

Allegro MicroSystems

Allegro MicroSystems' ACS70310LKTATN-001B5-C is a magnetic field sensor with 4.5-5.5V supply voltage range, AEC-Q100 screening level, and 1mV/G sensitivity. Ideal for automotive applications due to its -40 to 150°C operating temperature range and push-pull analog voltage output interface.

S-5712ACNL1-M3T1U

Seiko Instruments Usa

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: VOLTAGE OUTPUT; Package Shape or Style: RECTANGULAR; Output Range: 0.40-1.45V; Body Height: 1.15 mm;

ACS716KLATR-6BB-NL-T

Allegro MicroSystems

Allegro MicroSystems' ACS716KLATR-6BB-NL-T is a magnetic field sensor with 16 terminals, offering 0.75% linearity and operating b/w -40 to 125°C. It has a max supply voltage of 3.6V, outputting analog voltage for applications requiring precise magnetic field measurements in compact spaces.

AH173-WG-7-A

Diodes Incorporated

Diodes Inc. AH173-WG-7-A is a Hall effect magnetic field sensor with 3-20V supply, -40 to 125°C temp range, and 6mA max current. Ideal for detecting magnetic fields in automotive and industrial applications due to its compact size and analog voltage output.

TLE49462KHTSA1

Infineon Technologies

TLE49462KHTSA1 by Infineon is a magnetic field sensor with 18V supply, 4mT hysteresis, and -3.5mT min. range. Ideal for Hall effect applications, it offers digital voltage output in a compact rectangular package suitable for surface mount installations.

A3290KLHLX-T

Allegro MicroSystems

Allegro MicroSystems' A3290KLHLX-T is a magnetic field sensor with 3-24V supply, -40 to 125°C operating temp, and 10mT hysteresis. Ideal for current output applications like automotive sensors, industrial controls, and consumer electronics due to its compact rectangular design and surface mount capability.

DRV5021A2EDBZRQ1

Texas Instruments

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA; Minimum Supply Voltage: 2.5 V;

A3516LUA

Sanken Electric

MAGNETIC FIELD SENSOR,HALL EFFECT; Package Shape or Style: RECTANGULAR; Body Height: 5.11 mm; Body Width: 1.52 inch; Housing: PLASTIC; Body Length/Diameter: 4.1 mm;

SS496A-S

Honeywell Sensing And Control

MAGNETIC FIELD SENSOR,HALL EFFECT;

AH1889-Z-7

Diodes Incorporated

AH1889-Z-7 by Diodes Inc. is a magnetic field sensor with 1.65V min and 3.6V max supply voltage, ideal for hall effect applications. Featuring 0.8mT hysteresis, it offers a voltage output range of 0.20-1.60V and operates b/w -40 to 85°C temperature range in surface mount packages.

A1262LLHLT-X-T

Allegro MicroSystems

Allegro MicroSystems' A1262LLHLT-X-T is a Hall effect magnetic field sensor with 4-24V supply, 3.4mT hysteresis, and -40 to 150°C operating range. Ideal for voltage output applications in automotive, industrial, and consumer electronics due to its compact rectangular design and surface mount capability.

TLV49681TBXALA1

Infineon Technologies

Infineon's TLV49681TBXALA1 is a magnetic field sensor with 3-26V supply voltage range, -40 to 125°C operating temperature, and 2mT hysteresis. Ideal for applications requiring current output sensing in environments with magnetic fields up to ±2.3mT.