Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ACS732KLATR-65AB-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

ACS732KLATR-65AB-T
Description

CURRENT SENSOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 16; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Package Equivalence Code: SOP16,.4;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Loras Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CGA3E2X7R1H104K080AA

TDK

CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

LL4148

Itt Components

RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;

Details

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

SN6505BDBVR

Texas Instruments

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

1N4148

Forward International Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

1N4148WS

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Eic Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Meritek Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

NDT2955

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MMBT2222ALT1G

Onsemi

MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.

Details

ACS732KLATR-65AB-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.75 V
Other Names:	620-ACS732KLATR-65AB-TTR
Package Body Material:	PLASTIC/EPOXY
Maximum Supply Voltage:	5.25 V
Output Type:	ANALOG VOLTAGE
Terminal Finish:	MATTE TIN
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Body Width:	7.5 inch
Sensors or Transducers Type:	CURRENT SENSOR
No. of Terminals:	16
Package Equivalence Code:	SOP16,.4
Package Shape or Style:	RECTANGULAR
Screening Level:	AEC-Q100
Output (V):	OPEN-DRAIN
Body Height:	2.35 mm
Body Length/Diameter:	10.3 mm
Maximum Operating Temperature:	125 Cel

Category Top Products

TMCS1100A2QDRQ1

Texas Instruments

TMCS1100A2QDRQ1 by Texas Instruments is a current sensor with 3-5.5V supply voltage range, AEC-Q100 screening level, and -40 to 125°C operating temperature. Ideal for automotive applications due to its surface mount feature and analog voltage output.

OHD3-100M

KEMET Corporation

THERMAL SENSOR;

LM94021QBIMGX/NOPB

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -50 Cel; Maximum Operating Temperature: 150 Cel;

ZMOD4410AI3V

Renesas Electronics

ZMOD4410AI3V by Renesas Electronics is a gas sensor with a supply voltage range of 1.7V to 3.6V and operates b/w -40°C to 65°C. It features digital output, a square package style, and gold terminal finish. Ideal for surface mount applications in various industries requiring precise gas sensing capabilities.

DHR400C10

Lem International Sa

Other Sensors/Transducers;

TMCS1108A1UQDRQ1

Texas Instruments

TMCS1108A1UQDRQ1 by Texas Instruments is a current sensor with 3-5V supply, AEC-Q100 screening, and -40 to 125°C operating temp. Ideal for automotive applications due to its surface mount package and analog voltage output.

HDC3022DEJR

Texas Instruments

HDC3022DEJR by Texas Instruments is a humidity and temperature sensor with 3% accuracy, operating b/w -40 to 125°C. It has a digital voltage output range of 0.4-1.4V, suitable for surface mount applications in various industries like HVAC and weather monitoring.

QT60160-ISG

Microchip Technology

QT60160-ISG by Microchip Technology is a TOUCH SENSOR with 32 terminals, operating at -40 to 85°C. It has a digital voltage output range of 0.20-4.20V and requires a supply voltage b/w 1.8-5.25V. Ideal for surface mount applications in various industries due to its compact square shape measuring 5x5mm with a height of 1mm.

SCHA63T-K03-05

Murata Manufacturing

Murata's SCHA63T-K03-05 is a 32-terminal accelerometer/gyroscope with 3-3.6V supply voltage range, outputting digital voltage from 0.5-2.8V. Operating b/w -40 to 110°C, it's ideal for surface mount applications in various industries.

AWM1200V

Honeywell Sensing And Control

Other Sensors/Transducers;

AD590JF/883B

General Electric Solid State

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Terminal Finish: Tin/Lead (Sn/Pb); Package Body Material: CERAMIC; Temperature Coef (ppm/Cel): POSITIVE;

LM95071CIMF

National Semiconductor

Other Sensors/Transducers; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Minimum Operating Temperature: -40 Cel;

ACS722KMATR-20AB-T

Allegro MicroSystems

ACS722KMATR-20AB-T by Allegro MicroSystems is a current sensor with 16 terminals. It operates b/w -40 to 125°C, providing an analog voltage output range of 0.33-2.97V. This rectangular sensor, made of plastic, is ideal for surface mount applications in various industries.

BMG250

Robert Bosch

BMG250 by Robert Bosch is a 3-axis gyroscope sensor with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Measuring 2.5"x3mm, it's ideal for applications requiring precise orientation sensing in compact spaces like wearables and drones.

TCS34003FNM

Ams Ag

COLOR SENSOR;

CAB500-C/SP5

Lem International Sa

CURRENT SENSOR;

LV25-1000/SP1

Lem International Sa

Other Sensors/Transducers;

ZED-F9R-00B

U-blox Ag

Other Sensors/Transducers;

2308027

Phoenix Contact

Phoenix Contact 2308027 is a CURRENT SENSOR with output range of 4-20mA. It operates b/w -40 to 65 °C and has a supply voltage range of 20-30 V. Ideal for DIN RAIL MOUNT applications due to its compact body dimensions (33.8" x 70mm x 90mm).

TMCS1108A3UQDR

Texas Instruments

TMCS1108A3UQDR by Texas Instruments is a current sensor with 8 terminals, operating voltage range of 3-5V. It offers analog voltage output, suitable for applications requiring precise current monitoring in temperature range -40 to 85°C. Package style is rectangular with dimensions 4.905mm x 3.895 inch x 1.75 mm, designed for surface mount assembly.