Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

A1326LUA-T

Manufacturer

Allegro MicroSystems
Manufacturer's Part Number

A1326LUA-T
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Output Circuit Type: SINGLE-ENDED;
Datasheet

Datasheet

Not In Stock

Popular Products

LM2675M-ADJ/NOPB

Texas Instruments

LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.

Details

ULN2803A

Sanken Electric

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

LM358MX

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

1N4148WT

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS25-32.768KHZ-1-T

Abracon

Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.

Details

ULN2803A

Vishay Intertechnology

NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;

Details

1N4148WS

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

SS14

Rugao Dachang Electronic

RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;

Details

2N7002

Changzhou Galaxy Century Microelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

A1326LUA-T Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	4.5 V
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	9 mA
Output Type:	ANALOG VOLTAGE
Sub-Category:	Other Sensors/Transducers
Sensitivity (mV/G):	2500 mV/G
Terminal Finish:	MATTE TIN
No. of Terminals:	3
Termination Type:	SOLDER
Technology:	BICMOS
Maximum Operating Temperature:	150 Cel
Maximum Supply Voltage:	5.5 V
Output Circuit Type:	SINGLE-ENDED
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Resistance:	1 ohm
Body Width:	1.52 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Package Equivalence Code:	SIP3,.03,80
Package Shape or Style:	RECTANGULAR
Linearity (%):	1.5
Body Height:	4.12 mm
Body Length/Diameter:	4.09 mm
Power Supplies (V):	5

Category Top Products

DRV5013AGQDBZRQ1

Texas Instruments

DRV5013AGQDBZRQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 12 mT, operating temperature range from -40 to 125 °C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a 2-WIRE INTERFACE and surface mounting feature.

TMAG5170A2QDGKR

Texas Instruments

TMAG5170A2QDGKR by Texas Instruments is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 2.3-5.5V and output range of 0.4-4.6V. Ideal for applications requiring precise magnetic field measurements in compact spaces like automotive sensors or industrial automation systems.

TLE4998P3XALA1

Infineon Technologies

TLE4998P3XALA1 by Infineon is a magnetic field sensor with 5V max supply voltage, 0.005 mT hysteresis, and 1.5" body width. Ideal for applications requiring precise analog current output in environments ranging from -40°C to 150°C. With a max magnetic field range of 200 mT, it offers accurate sensing capabilities for various industrial uses.

2SS52M-T3

Honeywell Sensing And Control

2SS52M-T3 by Honeywell is a magnetic field sensor with a plastic body, measuring 1.6" in width and 4.5mm in height. It operates b/w -40 to 150°C, with an output range of 20mA and max current of 11mA. Ideal for applications requiring precise analog current output based on magnetic field strength.

A1389LLHLT-9-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

TLE49452LXA

Infineon Technologies

TLE49452LXA by Infineon is a Hall effect magnetic field sensor with 3.8V to 24V supply voltage range, 5mT hysteresis, and 8mA max operating current. It is used for digital current output applications in various industries due to its rectangular package style and through-hole mounting feature.

APS12205LUAA

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; JESD-609 Code: e3; Terminal Finish: TIN;

MLX90251EVA-FAA-200-BU

Melexis N V

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG VOLTAGE; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 4.5 V; Body Width: 1.15 inch;

SS443A

Honeywell Sensing And Control

SS443A by Honeywell is a magnetic field sensor with 3.8-30V supply, 1.5mT hysteresis, and -55 to 160°C operating range. Ideal for applications requiring precise detection of magnetic fields in industrial automation and automotive systems. Features include open-collector output, through-hole mounting, and plastic housing for durability.

SS495B

Honeywell Sensing And Control

SS495B by Honeywell is a magnetic field sensor with 3 terminals, 1.57" width, and 4.06mm length. It operates b/w -40 to 150°C, with sensitivity of 3.125mV/G for a magnetic field range of -67mT to 67mT. Ideal for applications requiring precise analog current output in a compact rectangular package.

SS59ET

Honeywell Sensing And Control

SS59ET by Honeywell is a magnetic field sensor with 6.5V max supply voltage, -40 to 100°C operating temp range, and 1-1.75V analog current output. Ideal for applications requiring precise sensing of magnetic fields in a compact rectangular package.

A1125LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1125LLHLT-T is a magnetic field sensor with 3 terminals, operating voltage range of 3-24V, and hysteresis of 1mT. Ideal for automotive applications due to AEC-Q100 screening, it offers a current output range of 30-60mA and operates in temperatures from -40 to 150°C.

ACS724LMATR-50AU-T

Allegro MicroSystems

Allegro MicroSystems' ACS724LMATR-50AU-T is a magnetic field sensor with voltage output range of 0.5-4.5V, ideal for automotive applications due to AEC-Q100 screening and operating temperature range of -40 to 150°C. It features single-ended output circuit type, BICMOS technology, and surface mounting feature.

DRV5011ADDMRR

Texas Instruments

DRV5011ADDMRR by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 4mT hysteresis, and -40 to 135°C operating temperature range. It features a push-pull current output and is ideal for applications requiring precise magnetic field detection in compact spaces.

DRV5056Z4QDBZR

Texas Instruments

DRV5056Z4QDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 3-5.5V and output current up to 1A. Ideal for applications requiring precise analog current output in temperatures ranging from -40 to 125°C, it features a unipolar input mode and surface mounting feature.

DRV5011ADYBHR

Texas Instruments

DRV5011ADYBHR by Texas Instruments is a magnetic field sensor with 5.5V max supply voltage, 4mT hysteresis, and -40 to 125°C operating temperature range. Ideal for applications requiring digital current output in a square package style, such as automotive sensors and industrial control systems.

AH173-WG-7-A

Diodes Incorporated

Diodes Inc. AH173-WG-7-A is a Hall effect magnetic field sensor with 3-20V supply, -40 to 125°C temp range, and 6mA max current. Ideal for detecting magnetic fields in automotive and industrial applications due to its compact size and analog voltage output.

AH3562Q-SA-7

Diodes Incorporated

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

DRV5013AGQDBZR

Texas Instruments

DRV5013AGQDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 12mT. It operates in temperatures from -40°C to 125°C, making it suitable for various applications requiring precise digital voltage output based on magnetic field strength measurements. The sensor's compact rectangular package with surface mounting feature makes it ideal for space-constrained designs.

SS411A-R

Honeywell Sensing And Control

SS411A-R by Honeywell is a magnetic field sensor with 3.8-30V supply, -40 to 150°C temp range, and 6mT magnetic field sensitivity. Ideal for applications requiring digital current output, such as position sensing in automotive or industrial settings.