Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

C3E-18.432-12-3030-X

Manufacturer

Aker Technology
Manufacturer's Part Number

C3E-18.432-12-3030-X
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/YEAR; Frequency Stability: 30 %; Series Resistance: 60 ohm;
Datasheet

Datasheet

Not In Stock

Popular Products

SS14

Vishay Intertechnology

Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.

Details

2N2222A

Shanghai Lunsure Electronic Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

LM2931AZ-5.0G

Onsemi

LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.

Details

M24308/2-1F

Air Electro

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;

Details

BAV99

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

SS14

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WT

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56351

Souriau

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USB2514BI-AEZG

Microchip Technology

USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.

Details

SMBJ18CA

Semtech

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV303N

Onsemi

FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

C3E-18.432-12-3030-X Technical Details

TYPE	DESCRIPTION
Load Capacitance:	12 pF
Frequency Tolerance:	30 ppm
Frequency Stability:	30 %
Series Resistance:	60 ohm
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	100 uW
Nominal Operating Frequency:	18.432 MHz
Aging:	3 PPM/YEAR
Physical Dimension:	3.2mm x 2.5mm x 0.75mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	TAPE PACKING IS AVAILABLE WITH QTY OF LESS THAN 250PCS
Maximum Operating Temperature:	85 Cel

Category Top Products

MP04A

Cts

The Cts MP04A crystal oscillator operates at 4 MHz with a frequency tolerance of 45 ppm and stability of 50%. It features a series resistance of 150 ohm, suitable for applications requiring precise timing in temperature range from -20 to 70 °C. Ideal for through hole mounting, it has drive level of 100 uW and compact dimensions L10.85XB4.5XH13.46 (mm).

HCM4925.000MABJ-UT

Citizen Finedevice

HCM4925.000MABJ-UT by Citizen Finedevice is a crystal oscillator with 25 MHz nominal frequency, 30 ppm tolerance, and 50% stability. It operates b/w -10 to 60 °C and features a surface mount design for various applications requiring precise timing.

CM41532768EZFT

Citizen Finedevice

CM41532768EZFT by Citizen Finedevice is a crystal oscillator with 10 ppm frequency tolerance and 122% stability. Operating at 0.032768 MHz, it features a series resistance of 70k ohm and aging rate of 3 PPM/yr. Ideal for applications requiring precise timing in compact designs with surface mount capability.

RH100-12.000-10-2020-EXT-TR

Raltron Electronics

Raltron Electronics' RH100-12.000-10-2020-EXT-TR crystal oscillator offers 20 ppm frequency tolerance, 20% stability, and 100 ohm series resistance. Ideal for applications requiring a 12 MHz operating frequency, such as telecommunications equipment and industrial automation systems.

MC-30632.7680K-E3:PURESN

Seiko Epson

MC-30632.7680K-E3:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, it operates b/w -40 to 85 °C and features surface mounting.

CC7V-T1A32.768KHZ9PF+/-20PPM

Micro Crystal Ag

CC7V-T1A32.768KHZ9PF+/-20PPM by Micro Crystal Ag is a crystal oscillator with 20 ppm frequency tolerance, 126% frequency stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.

ABM8-16.000MHZ-10-D7G-T

Abracon

ABM8-16.000MHZ-10-D7G-T by Abracon is a 16 MHz crystal oscillator with 15 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing, such as in telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with surface mounting feature.

NX2012SA-32.768K-STD-MUB-1

Nihon Dempa Kogyo

NX2012SA-32.768K-STD-MUB-1 by Nihon Dempa Kogyo is a crystal oscillator with a frequency tolerance of 20 ppm and a frequency stability of 144%. It is commonly used in applications requiring precise timing, such as telecommunications and consumer electronics.

FSXLF327

Fox Electronics

FSXLF327 by Fox Electronics is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 144%. It has a series resistance of 65000 ohm and is suitable for applications requiring a nominal operating frequency of 0.032768 MHz, such as surface mount devices.

ABM3-20.000MHZ-D2Y-T

Abracon

ABM3-20.000MHZ-D2Y-T by Abracon is a 20MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, such as telecommunications equipment and industrial automation systems.

TSX-322524.0000MF15X-AC6

Seiko Epson

TSX-322524.0000MF15X-AC6 by Seiko Epson is a 24 MHz crystal oscillator with 10 ppm frequency tolerance, 40 ohm series resistance, and GOLD OVER NICKEL terminal finish. Ideal for applications requiring precise timekeeping in compact electronic devices due to its small L3.2XB2.5XH0.6 (mm) dimensions and low drive level of 1 uW.

ABM8AIG-27.000MHZ-12-2Z-T3

Abracon

ABM8AIG-27.000MHZ-12-2Z-T3 by Abracon is a crystal oscillator with 27 MHz nominal frequency, 20 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 125 °C, such as telecommunications equipment and industrial automation systems.

ABL-8.000MHZ-B2

Abracon

Abracon ABL-8.000MHZ-B2 crystal oscillator operates at 8 MHz with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as in communication systems or industrial automation. Features include 80 ohm series resistance, -20 to 70 °C operating temperature range, and compact L11.5XB5.0XH3.5 mm size.

RT3215-32.768-12.5-TR-NS19

Raltron Electronics

Raltron Electronics' RT3215-32.768-12.5-TR-NS19 is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, such as IoT devices due to its compact size of 3.2mm x 1.5mm x 0.8mm and low drive level of 1 uW.

NX3225GA-20.000M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-20.000M-STD-CRG-2 by Nihon Dempa Kogyo is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, it features surface mounting and low drive level of 10 uW.

ABM8G-12.000MHZ-B-4-Y-T

Abracon

ABM8G-12.000MHZ-B-4-Y-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.

NX1612SA-50M-EXS00A-CS08403

Nihon Dempa Kogyo

NX1612SA-50M-EXS00A-CS08403 by Nihon Dempa Kogyo is a crystal oscillator with 10 ppm frequency tolerance, 15% stability, and 80 ohm series resistance. Ideal for applications requiring a parallel-fundamental type resonator at 50 MHz, operating b/w -30 to 85 °C with an aging rate of 3 PPM/yr.

ABM11W-25.0000MHZ-8-D1X-T3

Abracon

ABM11W-25.0000MHZ-8-D1X-T3 by Abracon is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

FK135EIHM0.032768-T3

Fox Electronics

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Nominal Operating Frequency: .032768 MHz; Minimum Operating Temperature: -40 Cel;

ABM8W-12.0000MHZ-6-D2X-T3

Abracon

Abracon's ABM8W-12.0000MHZ-6-D2X-T3 crystal oscillator operates at 12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, surface mounting feature, and gold over nickel terminal finish.