Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ABM8-16.000MHZ-10-D7G-T

Manufacturer

Abracon
Manufacturer's Part Number

ABM8-16.000MHZ-10-D7G-T
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 15 ppm; Aging: 3 PPM/FIRST YEAR; Physical Dimension: 3.2mm X 2.5mm X 0.8mm; Terminal Finish: NICKEL GOLD;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

Bytesonic Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

LL4148

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Littelfuse

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

L7805CV

STMicroelectronics

L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

STMicroelectronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;

Details

SMBJ18CA

World Products

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

Details

1N4148WSF-7

Diodes Incorporated

1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

LM555CN

Texas Instruments

LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.

Details

1N4148WT

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABM8-16.000MHZ-10-D7G-T Technical Details

TYPE	DESCRIPTION
Load Capacitance:	10 pF
Frequency Tolerance:	15 ppm
Frequency Stability:	15 %
Series Resistance:	70 ohm
Terminal Finish:	NICKEL GOLD
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	10 uW
Nominal Operating Frequency:	16 MHz
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	3.2mm X 2.5mm X 0.8mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	85 Cel

Category Top Products

FQ5032B-12.000

Fox Electronics

FQ5032B-12.000 by Fox Electronics is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, gold terminal finish, and operates b/w 0°C to 70°C temperatures.

ABLS-14.31818MHZ-B-2-T

Abracon

ABLS-14.31818MHZ-B-2-T by Abracon is a 14.31818 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C and features a parallel-fundamental crystal type in a compact surface mount package.

ABLS-18.432MHZ-L-4-Q-T

Abracon

ABLS-18.432MHZ-L-4-Q-T by Abracon is a 18.432 MHz crystal oscillator with 30 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, it operates b/w -55 to 125 °C, featuring a parallel-fundamental crystal type and surface mounting feature.

ABLS2-19.200MHZ-B4Y-T

Abracon

ABLS2-19.200MHZ-B4Y-T by Abracon is a 19.2 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70°C, it features parallel fundamental type and surface mounting feature.

CM8V-T1A32.768KHZ9PF+/-100PPMTAQC

Micro Crystal Ag

CM8V-T1A32.768KHZ9PF+/-100PPMTAQC by Micro Crystal Ag is a crystal oscillator with 100 ppm frequency tolerance, 126% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in compact designs due to its small size of 2mm x 1.2mm x 0.6mm and surface mounting feature.

E8WSDC12-32.768K

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Drive Level: .5 uW; Frequency Stability: 144 %;

ABM8G-24.000MHZ-18-D-2-Y-T3

Abracon

ABM8G-24.000MHZ-18-D-2-Y-T3 by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 30%. It has a series resistance of 60 ohm and is suitable for applications requiring precise timing, such as in communication systems or microcontrollers.

TSX-322516.0000MF09Z-AC0

Seiko Epson

TSX-322516.0000MF09Z-AC0 by Seiko Epson is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 9% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 75 °C and features gold over nickel terminal finish for surface mount installation.

ECS-120-20-5PX-TR

Ecs International

ECS-120-20-5PX-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring a parallel-fundamental crystal resonator at 12 MHz, it operates b/w -10°C to 70°C with matte tin copper finish and surface mount feature.

ABLS-16.000MHZ-K-4-T

Abracon

ABLS-16.000MHZ-K-4-T by Abracon is a 16 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 125 °C, featuring a parallel-fundamental crystal type and surface mounting feature.

TSX-322525.0000MF10P-C

Seiko Epson

Seiko Epson's TSX-322525.0000MF10P-C crystal oscillator offers 25 MHz nominal frequency with 10 ppm tolerance and 10% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 85°C, featuring a compact size of 3.2mm x 2.5mm x 0.6mm for surface mount installation.

TSX-322524.0000MF10Z-C3

Seiko Epson

TSX-322524.0000MF10Z-C3 by Seiko Epson is a 24 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 75 °C and features GOLD OVER NICKEL terminal finish for durability in surface mount installations.

ABS06-32.768KHZ-6-1-T

Abracon

Abracon's ABS06-32.768KHZ-6-1-T crystal oscillator offers 10 ppm frequency tolerance, 144% stability, and 90000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency in a compact 2.0mm X 1.2mm X 0.6 mm surface mount package with GOLD terminal finish.

XRCGB27M120F2P10R0

Murata Manufacturing

Murata Manufacturing's XRCGB27M120F2P10R0 crystal oscillator operates at 27.12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Suitable for applications requiring precise timing, it features a low aging rate of 5 PPM/YEAR and surface mounting feature.

ECS-.327-12.5-34RR-TR

Ecs International

ECS-0.327-12.5-34RR-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 20000 ohm series resistance. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range and 0.032768 MHz frequency. Suitable for surface mount setups with gold-nickel terminal finish and compact L3.2XB1.5XH0.9 mm dimensions.

MS3V-T1R32.768KHZ7PF+/-20PPMTAQCAU

Micro Crystal Ag

MS3V-T1R32.768KHZ7PF+/-20PPMTAQCAU by Micro Crystal Ag is a 0.032768 MHz crystal oscillator with 20 ppm frequency tolerance and 126% frequency stability. Ideal for applications requiring precise timing, such as IoT devices, wearables, and automotive electronics due to its compact size and surface mount feature.

ABM3-24.000MHZ-D2Y-T

Abracon

ABM3-24.000MHZ-D2Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel fundamental crystal type.

ABL-10.000MHZ-B2

Abracon

ABL-10.000MHZ-B2 by Abracon is a crystal oscillator with 10 MHz frequency, 20 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in temperatures ranging from -20°C to 70°C.

LFXTAL003000REEL

Iqd Frequency Products

LFXTAL003000REEL by IQD Frequency Products is a 32.768 MHz crystal oscillator with 20 ppm frequency tolerance and 5 PPM/YEAR aging. Ideal for applications requiring precise timing, it features a parallel-fundamental crystal type and operates b/w -40 to 85 °C temperatures.

ECS-.327-12.5-39-TR

Ecs International

ECS-0.327-12.5-39-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.