Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ABM3B-12.000MHZ-B-2-T

Manufacturer

Abracon
Manufacturer's Part Number

ABM3B-12.000MHZ-B-2-T
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Frequency Stability: 50 %; Terminal Finish: Nickel/Gold (Ni/Au);
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Hy Electronic

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

BSS138-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WS

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

BAV99

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32H753IIT6

STMicroelectronics

STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AMS1117-3.3

Advanced Monolithic Systems

AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;

Details

1N4148

Taitron Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Taiwan Semiconductor

RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;

Details

1N4148WS

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

STM32H753ZIT6

STMicroelectronics

STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.

Details

2N2222A

Electronic Transistors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

CL31B104KBCNNNC

Samsung Electro-mechanics

Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.

Details

ABM3B-12.000MHZ-B-2-T Technical Details

TYPE	DESCRIPTION
Load Capacitance:	18 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	50 %
Series Resistance:	70 ohm
Terminal Finish:	Nickel/Gold (Ni/Au)
JESD-609 Code:	e4
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	10 uW
Nominal Operating Frequency:	12 MHz
Aging:	5 PPM/FIRST YEAR
Physical Dimension:	L5.0XB3.2XH1.1 (mm)/L0.197XB0.126XH0.043 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	TR, 7 INCH
Maximum Operating Temperature:	70 Cel

Category Top Products

TSX-322524.0000MF10Z-AC6

Seiko Epson

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 1 PPM/FIRST YEAR; Maximum Operating Temperature: 75 Cel; Terminal Finish: GOLD OVER NICKEL;

R1612-32.000-10-F-1530-TR

Raltron Electronics

Raltron Electronics' R1612-32.000-10-F-1530-TR crystal oscillator offers 15 ppm frequency tolerance, 30% stability, and 150 ohm series resistance. Ideal for applications requiring a parallel-fundamental type crystal resonator operating at 32 MHz with a load capacitance of 10 pF.

ABM3B-14.31818MHZ-B-2-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Physical Dimension: L5.0XB3.2XH1.1 (mm)/L0.197XB0.126XH0.043 (inch); Nominal Operating Frequency: 14.31818 MHz;

ABM3C-25.000MHZ-D4Y-T

Abracon

ABM3C-25.000MHZ-D4Y-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications equipment and industrial automation systems.

CM51932.768KDZF-UT

Citizen Electronics

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Maximum Operating Temperature: 85 Cel; Drive Level: 1 uW;

R1612-25.000-9-F-3030-TR

Raltron Electronics

Raltron Electronics' R1612-25.000-9-F-3030-TR is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability, ideal for applications requiring precise timing such as telecommunications and networking equipment. Featuring a parallel fundamental crystal type, it operates b/w -10°C to 60°C with a low aging rate of 2 PPM/year, making it reliable for long-term use in various electronic devices.

ABM3C-24.000MHZ-D4Y-T

Abracon

ABM3C-24.000MHZ-D4Y-T by Abracon is a 24 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, such as telecommunications equipment and industrial automation systems.

XRCGB27M120F2P10R0

Murata Manufacturing

Murata Manufacturing's XRCGB27M120F2P10R0 crystal oscillator operates at 27.12 MHz with a frequency tolerance of 20 ppm and stability of 20%. Suitable for applications requiring precise timing, it features a low aging rate of 5 PPM/YEAR and surface mounting feature.

MA-50612.0000M-C0:ROHS

Seiko Epson

MA-50612.0000M-C0:ROHS by Seiko Epson is a 12 MHz crystal oscillator with 50 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a surface mount design and low drive level of 10 uW.

ABM11-32.000MHZ-B1U-T

Abracon

ABM11-32.000MHZ-B1U-T by Abracon is a 32 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, featuring a compact size of 2.0mm x 1.6mm x 0.59mm for surface mount installation.

ECS-.327-6-34QCN-TR

Ecs International

ECS-0.327-6-34QCN-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. It operates at 0.032768 MHz and is ideal for applications requiring precise timing in temperature-sensitive environments. With gold terminal finish and compact dimensions of 3.2mm x 1.5mm x 0.9mm, it offers reliable performance from -40 to 85 °C.

FC-135R32.7680KF-A3

Seiko Epson

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Aging: 3 PPM/FIRST YEAR; Drive Level: .5 uW; Frequency Stability: 144 %; Minimum Operating Temperature: -40 Cel;

ABM13W-80.0000MHZ-8-B1Z-T5

Abracon

ABM13W-80.0000MHZ-8-B1Z-T5 by Abracon is a crystal oscillator with 10 ppm frequency tolerance and 50% frequency stability. It operates at a nominal frequency of 80 MHz and has a load capacitance of 8 pF. This surface mount device is suitable for applications requiring precise timing in electronic systems.

9HT10-32.768KDZC-T

Txc

9HT10-32.768KDZC-T by Txc is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing such as IoT devices, wearables, and communication equipment due to its compact size (3.2mm x 1.5mm x 0.75mm) and low drive level of 1 uW.

7V-12.000MAAE-T

Txc

7V-12.000MAAE-T by Txc is a crystal oscillator with 30 ppm frequency tolerance and 30% stability. Operating at 12 MHz, it has a load capacitance of 12 pF and aging rate of 3 PPM/yr. Ideal for applications requiring precise timing in compact devices due to its small size and surface mount feature.

CM315D32768DZYT

Citizen Finedevice

CM315D32768DZYT by Citizen Finedevice is a crystal oscillator with a frequency tolerance of 20 ppm and series resistance of 70000 ohm. It operates at a nominal frequency of 0.032768 MHz and is suitable for surface mount applications.

ECS-.327-12.5-17X-C-TR

Ecs International

ECS-0.327-12.5-17X-C-TR by Ecs International is a crystal oscillator with 10 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

ABM8G-12.288MHZ-18-D-2-Y-T

Abracon

ABM8G-12.288MHZ-18-D-2-Y-T by Abracon is a 12.288 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with surface mounting feature.

ABLS-12.000MHZ-16-A-4-H-T

Abracon

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/FIRST YEAR; Maximum Operating Temperature: 60 Cel; JESD-609 Code: e3;

ABM3B-24.000MHZ-R60-D-1-W-T

Abracon

ABM3B-24.000MHZ-R60-D-1-W-T by Abracon is a crystal oscillator with 24 MHz frequency, 10 ppm tolerance, and 25% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its high accuracy and reliability.