Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

HC49S-20-30-50-70-12-ATF

Manufacturer

Multicomp Pro
Manufacturer's Part Number

HC49S-20-30-50-70-12-ATF
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: THROUGH HOLE MOUNT; Frequency Tolerance: 30 ppm; Aging: 5 PPM/YEAR; Additional Features: AT-CUT; TAPE; Frequency Stability: 50 %;
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Infineon Technologies

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

Details

SDR0604-101KL

Bourns

SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Good-ark Electronics

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;

Details

BAV99

Comchip Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Goodwork Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

2N7002

Itt Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

1N4148WS

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

HC49S-20-30-50-70-12-ATF Technical Details

TYPE	DESCRIPTION
Load Capacitance:	12 pF
Frequency Tolerance:	30 ppm
Frequency Stability:	50 %
Series Resistance:	40 ohm
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	THROUGH HOLE MOUNT
Drive Level:	100 uW
Nominal Operating Frequency:	20 MHz
Aging:	5 PPM/YEAR
Physical Dimension:	L10.9XB4.65XH4.0 (mm)/L0.429XB0.183XH0.157 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	AT-CUT; TAPE
Maximum Operating Temperature:	70 Cel

Category Top Products

445W2XJ25M00000

Cts

The Cts 445W2XJ25M00000 crystal oscillator offers a frequency tolerance of 20 ppm and stability of 15%. With a nominal operating frequency of 25 MHz, it is ideal for applications requiring precise timing such as telecommunications equipment and industrial automation systems. The surface mount design and gold over nickel terminal finish make it suitable for compact electronic devices.

ABM3-20.000MHZ-D2Y-T

Abracon

ABM3-20.000MHZ-D2Y-T by Abracon is a 20MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, such as telecommunications equipment and industrial automation systems.

ATS12A

Cts

The Cts ATS12A crystal oscillator operates at 12 MHz with a frequency tolerance of 30 ppm and stability of 50%. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and low aging rate of 5 PPM/year.

R1612-25.000-9-F-3030-TR

Raltron Electronics

Raltron Electronics' R1612-25.000-9-F-3030-TR is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability, ideal for applications requiring precise timing such as telecommunications and networking equipment. Featuring a parallel fundamental crystal type, it operates b/w -10°C to 60°C with a low aging rate of 2 PPM/year, making it reliable for long-term use in various electronic devices.

ABLS-25.000MHZ-8-D-4-Y-F-T

Abracon

ABLS-25.000MHZ-8-D-4-Y-F-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel fundamental crystal type.

ECS-.327-12.5-39-TR

Ecs International

ECS-0.327-12.5-39-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

ABM8-19.200MHZ-B2-T

Abracon

ABM8-19.200MHZ-B2-T by Abracon is a 19.2 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20°C to 70°C, features nickel gold terminal finish, and has a compact surface mount design.

ABM8G-106-12.000MHZ-T

Abracon

ABM8G-106-12.000MHZ-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type in a compact surface mount package.

ABMM2-12.000MHZ-E2-T

Abracon

ABMM2-12.000MHZ-E2-T by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 20% stability. It operates b/w -20°C to 70°C, suitable for applications requiring precise timing in electronic devices. The surface-mount design with gold finish makes it ideal for compact PCB layouts.

ABM12W-24.0000MHZ-8-D1X-T3

Abracon

ABM12W-24.0000MHZ-8-D1X-T3 by Abracon is a 24 MHz crystal oscillator with 10 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and reliable performance.

R1210-52.000-5-F-0710-TR

Raltron Electronics

Raltron Electronics' R1210-52.000-5-F-0710-TR crystal oscillator offers 7 ppm frequency tolerance, 10% stability, and 100 ohm series resistance. Ideal for applications requiring a 52 MHz nominal operating frequency, such as telecommunications equipment or industrial automation systems.

FOXSLF/160-20

Fox Electronics

FOXSLF/160-20 by Fox Electronics is a 16 MHz crystal oscillator with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a through-hole mount and Tin/Silver/Copper terminal finish.

ABM8-24.000MHZ-B2-T

Abracon

ABM8-24.000MHZ-B2-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications equipment and industrial automation systems.

FQ3225BR-25.000

Fox Electronics

Fox Electronics' FQ3225BR-25.000 crystal oscillator offers 50 ppm frequency tolerance and 50% stability, with a series resistance of 80 ohm. Ideal for applications requiring a 25 MHz nominal operating frequency, such as telecommunications equipment and industrial automation systems.

CM8V-T1A32.768KHZ9PF+/-20PPMTAQC

Micro Crystal Ag

CM8V-T1A32.768KHZ9PF+/-20PPMTAQC by Micro Crystal Ag is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 55000 ohm series resistance. Ideal for applications requiring precise timing such as IoT devices, wearables, and automotive electronics due to its compact size and high performance.

7B-8.000MAAJ-T

Txc

7B-8.000MAAJ-T by Txc is an 8 MHz Crystal Oscillator with 30 ppm Frequency Tolerance, 30% Stability, and 80 ohm Series Resistance. Ideal for applications requiring precise timing in a compact surface mount package.

NX3225GA-12.288M-STD-CRG-2

Nihon Dempa Kogyo

NX3225GA-12.288M-STD-CRG-2 by Nihon Dempa Kogyo is a crystal oscillator with 20 ppm frequency tolerance, 30% stability, and 100 ohm series resistance. Ideal for applications requiring a 12.288 MHz nominal operating frequency, such as in temperature-sensitive environments due to its -40 to 85 °C operating range and compact size of 3.2mm x 2.5mm x 0.75mm for surface mount installations.

CC7V-T1A32.768KHZ12.5PF+/-20PPM

Micro Crystal Ag

Micro Crystal Ag's CC7V-T1A32.768KHZ12.5PF+/-20PPM is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in a compact surface mount package.

ABS06-32.768KHZ-T

Abracon

Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.

HC49S-4-20-50-60-30-ATF

Multicomp Pro

HC49S-4-20-50-60-30-ATF by Multicomp Pro is a 4 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -10°C to 60°C with a low aging rate of 5 PPM/year.