Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ABLS-19.6608MHZ-B-2-T

Manufacturer

Abracon
Manufacturer's Part Number

ABLS-19.6608MHZ-B-2-T
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/FIRST YEAR; Minimum Operating Temperature: -20 Cel; Physical Dimension: L11.4XB4.7XH4.2 (mm)/L0.449XB0.185XH0.165 (inch);
Datasheet

Datasheet

Not In Stock

Popular Products

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Temic Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SMBJ18CA

Yageo

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317D2TG

Onsemi

LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.

Details

2N2222A

Transistor & Electronic

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

2N2222A

SPC TECHNOLOGY/ MULTICOMP

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

PIC18F4550-I/ML

Microchip Technology

The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

2N2222A

Shanghai Lunsure Electronic Technology

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

1N4148WS-7-F

Diodes Incorporated

1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.

Details

1N4148WT

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C0603C104K5RACAUTO

KEMET Corporation

KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABLS-19.6608MHZ-B-2-T Technical Details

TYPE	DESCRIPTION
Load Capacitance:	18 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	50 %
Series Resistance:	40 ohm
Terminal Finish:	MATTE TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-20 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	100 uW
Nominal Operating Frequency:	19.6608 MHz
Aging:	5 PPM/FIRST YEAR
Physical Dimension:	L11.4XB4.7XH4.2 (mm)/L0.449XB0.185XH0.165 (inch)
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Additional Features:	TAPE AND REEL
Maximum Operating Temperature:	70 Cel

Category Top Products

ABM81-32.000MHZ-10-B1U-T3

Abracon

ABM81-32.000MHZ-10-B1U-T3 by Abracon is a 32 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.

ABS07-32.768KHZ-6-T

Abracon

Abracon's ABS07-32.768KHZ-6-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring a 0.032768 MHz nominal operating frequency, such as precision timekeeping in temperature-sensitive environments.

AB-25.000MHZ-B2F

Abracon

AB-25.000MHZ-B2F by Abracon is a 25MHz crystal oscillator with 50 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20°C to 70°C makes it versatile for various environments.

7A-8.000MAAJ-T

Txc

7A-8.000MAAJ-T by Txc is a 8 MHz Crystal Oscillator with 30 ppm Frequency Tolerance, 30% Stability, and Aging of 3 PPM/YEAR. Ideal for applications requiring precise timing in temperature range -20 to 70 °C, it features Surface mounting and low Drive Level of 1 uW.

Q0.032768-JTX310-12.5-20-T1-HMR-60K-LF

Jauch Quartz

Jauch Quartz Q0.032768-JTX310-12.5-20-T1-HMR-60K-LF is a crystal oscillator with 20 ppm frequency tolerance, 160% stability, and 60000 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment and industrial automation systems.

ECS-120-20-3X-TR

Ecs International

ECS-120-20-3X-TR by Ecs International is a crystal oscillator with a frequency tolerance of 30 ppm and frequency stability of 50%. It is commonly used in applications requiring a nominal operating frequency of 12 MHz, such as communication systems and electronic devices.

MC-30632.7680K-E:PURESN

Seiko Epson

MC-30632.7680K-E:PURESN by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz frequency in temperatures ranging from -40 to 85 °C. Suitable for surface mount setups due to its compact size of 8mm x 3.2mm x 2.54mm.

XRCGB32M000F2P00R0

Murata Manufacturing

XRCGB32M000F2P00R0 by Murata Manufacturing is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 20%. It has a series resistance of 100 ohm and is suitable for applications requiring a nominal operating frequency of 32 MHz.

ABM7-12.000MHZ-D-2-Y

Abracon

ABM7-12.000MHZ-D-2-Y by Abracon is a 12 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, featuring gold terminal finish and surface mounting feature.

FC-13532.7680KA-AG5

Epson Toyocom

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Series Resistance: 70000 ohm; Drive Level: .5 uW;

MP060-E

Cts

The Cts MP060-E crystal oscillator offers 30 ppm frequency tolerance, 50% stability, and 40 ohm series resistance. Ideal for applications requiring a 6 MHz nominal operating frequency, such as industrial automation systems or telecommunications equipment. With a compact size of L10.85XB4.5XH13.46 (mm), it ensures reliable performance in extreme temperatures from -40 to 85 °C.

X1E000021011400

Seiko Epson

Seiko Epson X1E000021011400 crystal oscillator offers 16 MHz nominal frequency with 10 ppm tolerance and 10% stability. Ideal for applications requiring precise timing in a compact surface-mount design, operating b/w -20°C to 75°C with low aging at 1 PPM/first year.

ABM8-25.000MHZ-B2-T3

Abracon

ABM8-25.000MHZ-B2-T3 by Abracon is a 25 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications and networking equipment.

ABM3-24.000MHZ-B2-T

Abracon

ABM3-24.000MHZ-B2-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -20 to 70 °C with surface mount feature for easy installation.

ECS-100-20-7SX-TR

Ecs International

ECS-100-20-7SX-TR by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 50 ohm series resistance. Ideal for applications requiring precise timing at 10 MHz, such as telecommunications equipment or industrial automation systems. Operating temperature range from -10 to 70 °C with surface mount feature.

ABM3B-16.000MHZ-D-1-X-T

Abracon

ABM3B-16.000MHZ-D-1-X-T by Abracon is a 16 MHz crystal oscillator with 10 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C, featuring nickel/gold terminal finish and parallel-fundamental crystal type.

TSX-322524.0000MF15X-AC3

Seiko Epson

The Seiko Epson TSX-322524.0000MF15X-AC3 is a crystal oscillator with a frequency tolerance of 10 ppm and series resistance of 40 ohm. It is commonly used in applications requiring a nominal operating frequency of 24 MHz, such as surface mount devices.

ABM8-25.000MHZ-12-D1X-T

Abracon

ABM8-25.000MHZ-12-D1X-T by Abracon is a 25 MHz crystal oscillator with 10 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, such as telecommunications and networking equipment.

ECS-.320-12.5-13

Ecs International

ECS-0.320-12.5-13 by Ecs International is a crystal oscillator with 30 ppm frequency tolerance, 42% stability, and 30000 ohm series resistance. It operates at 0.032 MHz ideal for applications requiring precise timing such as telecommunications equipment or industrial automation systems. The through-hole mounting feature and compact size of D6.2XH2.1 (mm) make it suitable for various electronic devices in a temperature range of -10 to 60 °C.

RH100-8.000-10-1010-EXT-TR

Raltron Electronics

Raltron Electronics' RH100-8.000-10-1010-EXT-TR crystal oscillator offers 10 ppm frequency tolerance and 10% stability, with a series resistance of 800 ohm. Ideal for applications requiring precise timing at an operating frequency of 8 MHz, it features gold terminal finish and surface mounting feature.