Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M23053/16-003-0

Manufacturer

3m Electronic Products Division
Manufacturer's Part Number

M23053/16-003-0
Description

ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
Datasheet

Not In Stock

Popular Products

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

1N4148

Laube Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BAV99

First Components International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;

Details

BAV99

Panasonic

MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MBR1560CT

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;

Details

LM107H/883

Texas Instruments

LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99WT1G

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

M23053/16-003-0 Technical Details

TYPE	DESCRIPTION
Construction:	SINGLE WALL
MIL Conformity:	NO
Jacket Material:	CROSSLINKED ELASTOMERIC POLYOLEFIN
Connector Accessory Type:	ASSEMBLY ITEMS
Assembly Item Name:	TAPER SLEEVE
IEC Conformity:	NO
DIN Conformity:	NO

Category Top Products

90119-0109

Molex

Molex 90119-0109 CONTACT features CRIMP terminal type, suitable for 24-22 AWG wires. Made of PHOSPHOR BRONZE with 0.168" length, it has FEMALE gender and SQUARE PIN-SOCKET style. Ideal for applications requiring 0.04-0.058" cable entry, such as assembly products needing a STRAIGHT mounting style.

1SNK708911R0000

TE Connectivity

TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;

1060-16-0622

TE Connectivity

TE Connectivity 1060-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 13A current. Ideal for applications requiring male gendered contacts and straight mounting style.

1393366-1

TE Connectivity

TE Connectivity's 1393366-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 11A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40 to 125°C.

0462-203-12141

TE Connectivity

TE Connectivity's 0462-203-12141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 12-14 AWG wires at 25A current. Ideal for SIGNAL applications requiring FEMALE ROUND PIN-SOCKET contacts in STRAIGHT mounting style.

10141272-313ALF

AMPHENOL ICC

The Amphenol Icc 10141272-313ALF contact assembly product features a crimp terminal type, rated for 4A current at 48V DC/AC. With a contact resistance of 30 mΩ, it is suitable for applications requiring a max wire size of 24 AWG and operating temperatures ranging from -40°C to 130°C.

SXA-001T-P0.6L

J S T Mfg

SXA-001T-P0.6L by J S T Mfg is a CRIMP terminal CONTACT with 3A rated current, suitable for XA CONNECTOR applications. It has approvals from CSA, TUV, and UL, with a temperature range of -25 to 85 °C. The FEMALE contact is made of PHOSPHOR BRONZE material and supports wire sizes from 26 to 22 AWG.

1011-026-0205

TE Connectivity

CONNECTOR ACCESSORY; Contact Gender: FEMALE; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;

39-00-0048

Molex

Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.

66101-4

TE Connectivity

TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.

13663715

Aptiv

CONNECTOR ACCESSORY;

66506-9

TE Connectivity

TE Connectivity 66506-9 is a CRIMP terminal with BRASS material. It has a wire gauge of 20 AWG, rated for 2A current. Ideal for AMPLIMITE HDP-20 and CPC CONNECTORS, it operates b/w -55 to 105 °C temperature range.

M23053/16-004-0

3m Electronic Products Division

ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;

AT60-215-16141

Amphenol

CONNECTOR ACCESSORY;

1701065

Phoenix Contact

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Assembly Item Name: PITCH SPACER; MIL Conformity: NO; Manufacturer Series: 1701065; DIN Conformity: NO;

1-968849-1

TE Connectivity

TE Connectivity's 1-968849-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for applications requiring female contact gender and cable entry ranging from 0.051 to 0.083 inch.

SSHL-003T-P0.2

J S T Mfg

SSHL-003T-P0.2 by J S T Mfg is a CRIMP terminal with POLYBUTYLENE TEREPHTHALATE insulator, suitable for wire and discrete cable types. It has a contact resistance of 40 mohm, rated current of 1 A, and operates b/w -25 to 85 °C. Ideal for signal applications requiring FEMALE contacts with SQUARE PIN-SOCKET design.

61030012016010

Harting Electronics & Kg

The Harting Electronics & Kg 61030012016010 HOOD is made of METAL with Mounting Options: SCREW and 4-40. It has a Max Operating Temperature of 90°C and Min Operating Temperature of -20°C. Ideal for assembly applications requiring durable, screw-mounted metal hoods.

DF22A-1416SCFA

Hirose Electric

CONNECTOR ACCESSORY;

1SNA199336R2000

TE Connectivity

TERMINAL BLOCK ACCESSORY;