Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

RC0603FR-0710RL

Manufacturer

Yageo
Manufacturer's Part Number

RC0603FR-0710RL
Description

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .1 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
Datasheet

Datasheet

Not In Stock

Popular Products

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

M39029/58-360

Amphenol

CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;

Details

SMMBT2222ALT1G

Onsemi

SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.

Details

C1206C104K5RACTU

KEMET Corporation

KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

1N4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LP2950CDT-3.3G

Onsemi

LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

USB3320C-EZK-TR

Standard Microsystems

INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ERJ3GEY0R00V

Panasonic

ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

LM358N

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

RC0603FR-0710RL Technical Details

TYPE	DESCRIPTION
Other Names:	Q2375939 232270461009L RC0603FR0710RL 311-10.0HRTR 311-10.0HRDKR 311-10.0HRCT 9C06031A10R0FKPFT
Construction:	Rectangular
Packing Method:	TR, PAPER, 7 INCH
Tolerance:	1 %
Width (Package):	.8 mm
Rated Temperature:	70 Cel
Size Code:	0603
Mounting Type:	SURFACE MOUNT
Terminal Finish:	Matte Tin (Sn) - with Nickel (Ni) barrier
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 Cel
Resistance:	10 ohm
No. of Terminals:	2
Temperature Coef (ppm/Cel):	200
Package Style (Meter):	SMT
Length (Package):	1.6 mm
Technology:	METAL GLAZE/THICK FILM
Rated Power Dissipation (P):	.1 W
Terminal Shape:	WRAPAROUND
Operating Voltage:	75 V
Additional Features:	LASER TRIMMABLE
Maximum Operating Temperature:	155 Cel
Resistor Type:	FIXED RESISTOR
Height (Package):	.45 mm

Category Top Products

MCT06030C1003FP500

Vishay Intertechnology

Vishay Intertechnology's MCT06030C1003FP500 is a thin film fixed resistor with 100000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics requiring precise resistance values at temperatures ranging from -55 to 125 °C.

CRCW12061M00FKEAC

Vishay Intertechnology

Vishay Intertechnology's CRCW12061M00FKEAC is a fixed resistor with a resistance of 1M ohm and a tolerance of 1%. It operates at temperatures ranging from -55 to 155 °C and is commonly used in surface mount applications.

FC0402E50R0BST1

Vishay Intertechnology

Vishay Intertechnology's FC0402E50R0BST1 is a thin film chip resistor with 50 ohm resistance, 0.1% tolerance, and 25 ppm/°C temperature coefficient. Ideal for surface mount applications in electronics requiring precise resistance values and stable performance across a wide temperature range from -55 to 150 °C.

FC0603E50R0BST1

Vishay Intertechnology

Vishay Intertechnology's FC0603E50R0BST1 is a thin film chip resistor with 50 ohm resistance, 0.1% tolerance, and 0.125 W power dissipation. Ideal for SMT applications, it operates b/w -55 to 125 °C with a temperature coefficient of 25 ppm/°C.

RC0603FR-071K5L

Yageo

The Yageo RC0603FR-071K5L is a fixed resistor with a resistance of 1500 ohm and a tolerance of 1%. It has a max operating temperature of 155 °C and is commonly used in surface mount applications.

RC1206FR-07220RL

Yageo

Yageo's RC1206FR-07220RL is a 220 ohm fixed resistor with 1% tolerance, suitable for surface mount technology. With a rated power dissipation of 0.25W and operating voltage of 200V, it operates b/w -55°C to 155°C. Ideal for applications requiring precise resistance values in compact electronic devices.

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

RC0603FR-07330RL

Yageo

Yageo's RC0603FR-07330RL is a fixed resistor with 330 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for SMT applications with operating voltage of 75 V and temperature range from -55 to 155 °C.

CRCW08054K70FKTABC

Vishay Intertechnology

Vishay Intertechnology's CRCW08054K70FKTABC is a chip fixed resistor with 4700 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for SMT applications, it operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C.

RC0603JR-07330RL

Yageo

Yageo's RC0603JR-07330RL is a 330 ohm fixed resistor with 5% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.1W and operating voltage of 75V, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits requiring precise resistance values.

SMW310RJT

TE Connectivity

TE Connectivity's SMW310RJT is a 10 ohm fixed wire wound resistor with 5% tolerance and 3W power dissipation. It operates b/w -55 to 275 °C, suitable for surface mount applications in electronics requiring high resistance and temperature stability. The rectangular package measures 10.5mm x 5.5mm x 5mm, making it ideal for compact circuit designs.

ERJ2RKF2400X

Panasonic

Panasonic's ERJ2RKF2400X is a fixed resistor with 240 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating temperature range of -55 to 155 °C.

ERJ3EKF1000V

Panasonic

Panasonic ERJ3EKF1000V is a fixed resistor with 100 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.

CRCW0402200KFKED

Vishay Intertechnology

Vishay Intertechnology's CRCW0402200KFKED is a fixed resistor with 200000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.

5100

Keystone Electronics

5100 by Keystone Electronics is a SMT fixed resistor with 0 ohm resistance and 0.5 W power dissipation. Ideal for jumper applications, it features metal strip technology, gull wing terminals, and operates at temperatures up to 105 °C.

RC0402FR-0733KL

Yageo

Yageo's RC0402FR-0733KL is a fixed resistor with 33000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its SMT package style and temperature coefficient of 100 ppm/°C.

RT0603FRE071KL

Yageo

Yageo's RT0603FRE071KL is a thin film fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C and has a temperature coefficient of 50 ppm/°C.

RK73H2ATTD10R0F

Koa Speer Electronics

RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.

ERJ8RQFR27V

Panasonic

ERJ8RQFR27V by Panasonic is a fixed resistor with a resistance of 0.27 ohm and a tolerance of 1%. It operates b/w -55 to 155 °C, making it suitable for various applications in automotive electronics due to its AEC-Q200 reference standard compliance and surface mount package style. With a rated power dissipation of 0.25 W, this rectangular package resistor is ideal for high-temperature environments requiring precise resistance values.

GS-3505361FLF

Tt Electronics Plc

GS-3505361FLF by Tt Electronics Plc is a 5360 ohm fixed resistor with 1% tolerance and 3W power dissipation. It features metal glaze/thick film technology, operates b/w -55 to 175 °C, and has a temperature coefficient of 50 ppm/°C. Ideal for applications requiring high precision resistance in through-hole mounting setups.