Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

771-9975/116-701

Manufacturer

Wago
Manufacturer's Part Number

771-9975/116-701
Description

RECTANGULAR POWER CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

LM107H/883

Rochester Electronics

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;

Details

LM7805CT

Integrated Circuit Technology

Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;

Details

LL4148

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

1N4148

Central Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

1N4148W-T

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

1N4148WS

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

B340A-13-F

Diodes Incorporated

B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

BSS138PS,115

NXP Semiconductors

NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.

Details

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR0520LT1

Motorola

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

2N2222A

Rectron

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

771-9975/116-701 Technical Details

TYPE	DESCRIPTION
Mating Contact Finish:	NOT SPECIFIED
Termination Contact Finish:	NOT APPLICABLE
Connector Type:	RECTANGULAR POWER CONNECTOR
Contact Material:	NOT SPECIFIED

Category Top Products

172708-0004

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

1-178316-3

TE Connectivity

TE Connectivity 1-178316-3 is a rectangular power connector with 6 contacts, rated at 9.5A signal current. It features glass-filled polyester insulation, solderable retention clips for board mounting, and a temperature range of -55 to 105°C. Ideal for commercial applications requiring durable connectors with UL certification.

43640-0501

Molex

The Molex 43640-0501 is a rectangular power connector with 5A signal current rating. Featuring a mating contact pitch of 0.118", it has an insulation resistance of 1Gohm and operates b/w -40°C to 105°C. Ideal for commercial applications, this connector offers durability up to 30 cycles and UL flammability rating of 94V-0.

1-640517-0

TE Connectivity

TE Connectivity 1-640517-0 is a RECTANGULAR POWER CONNECTOR with 2 contacts, rated at 250V and 9A. Made of POLYAMIDE66, it operates b/w -55 to 85 °C. Ideal for power applications requiring CRIMP termination in a PANEL mount setup.

1723104102

Molex

Molex 1723104102 is a POWER CONNECTOR with dimensions 0.405" x 0.352" x 0.614". Made of LIQUID CRYSTAL POLYMER, it operates b/w -40°C to 105°C. Ideal for BOARD mounting, it has 2 SQ PIN-SKT contacts and meets UL standards.

39-31-0060

Molex

Molex 39-31-0060 is a rectangular power connector with 6 contacts, TIN COPPER finish, and POLYAMIDE66 insulator. It has a dielectric voltage of 2200VAC, operates b/w -40 to 105 °C, and offers high durability with 30 cycles. Ideal for board mounting applications requiring reliable male connectors with natural color insulation.

1-178139-2

TE Connectivity

TE Connectivity 1-178139-2 is a rectangular power connector with 6 contacts, rated at 8A. Featuring glass-filled polyester insulator material, it offers high durability with 500 cycles. Ideal for board mounting applications, this connector has a max operating temperature of 105°C and min of -55°C.

0-0350766-1

TE Connectivity

TE Connectivity's 0-0350766-1 is a RECTANGULAR POWER CONNECTOR with 3 contacts, rated at 600V and operating b/w -55 to 105°C. It features a NYLON insulator, CRIMP termination, and is suitable for CABLE mounting applications.

350433-1

TE Connectivity

TE Connectivity's 350433-1 Power Connector features a body length of 1.05", insulation resistance of 100MΩ, and operating temperature range from -40 to 105°C. Ideal for board mounting applications, this male connector with solder termination and phosphor bronze contacts is rated at 12A for signal current.

76825-0012

Molex

Molex 76825-0012 Power Connector features 12 contacts, Matte Tin finish over Nickel barrier, and Liquid Crystal Polymer insulator. Ideal for board mounting applications requiring male SQ PIN-SKT contact style with UL 94V-0 flammability rating.

43645-0308

Molex

The Molex 43645-0308 is a rectangular power connector with polyamide insulator material. It features 3 contacts, female gender, and crimp termination type. Suitable for commercial applications with a temperature range of -40 to 105°C, it offers high insulation resistance of 1 Gohm and durability of 30 cycles.

1-350777-1

TE Connectivity

TE Connectivity 1-350777-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator. It has 2 contacts, operates b/w -55 to 105°C, and UL94V-0 flammability rating. Ideal for power applications requiring CRIMP termination on CABLE mountings.

1330G4

Anderson Power Products

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: HERMAPHRODITIC; Empty Shell: NO; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO;

43045-0815

Molex

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1000VAC; No. of Connectors: ONE;

39-01-2145

Molex

Molex 39-01-2145 is a rectangular power connector with 14 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It is used in cable applications for commercial reliability, featuring crimp termination and natural color insulation.

172171-1

TE Connectivity

TE Connectivity's 172171-1 is a POWER CONNECTOR with dimensions of 0.882" x 0.63" x 0.933". It has a rated voltage of 600V, operating temperature range from -20 to 105 °C. Ideal for cable mounting applications, it features 15 contacts in one row with CRIMP termination and UL94V-0 flammability rating.

43640-0600

Molex

RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Total No. of Contacts: 6; Minimum Withdrawal Force (N): 3.614;

1-1954289-3

TE Connectivity

TE Connectivity 1-1954289-3 is a RECTANGULAR POWER CONNECTOR with Dielectric Withstanding Voltage of 1500VAC. It has a Rated Current of 6A and operates b/w -40 to 105 °C. Ideal for board mounting applications requiring high voltage and current capabilities.

1053101108

Molex

RECTANGULAR POWER CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;

43020-0201

Molex

Molex 43020-0201 is a rectangular power connector with PBT-POLYESTER insulator, UL 94V-0 flammability rating, and 2 rows of contacts. It has a temperature range from -40 to 105°C and is suitable for commercial applications requiring a male crimp contact termination on cables.