Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

281-603/281-401

Manufacturer

Wago
Manufacturer's Part Number

281-603/281-401
Description

MODULAR TERMINAL BLOCK;
Datasheet

Datasheet

Not In Stock

Popular Products

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

1N4148WT

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CMX

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

1N5819HW-7-F

Diodes Incorporated

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2277UA/2K5E4

Texas Instruments

OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

M39029/58-360

Tri-star Electronics International

CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;

Details

SS14

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;

Details

SS14

Silicon Standard

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Diotec Semiconductor Ag

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;

Details

LL4148

Taitron Components

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDD5614P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;

Details

261

New England Microwave

Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;

Details

MMBF170LT1G

Rochester Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;

Details

AB26TRB-32.768KHZ--T

Abracon

AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

281-603/281-401 Technical Details

TYPE	DESCRIPTION
Product Type:	Modular Terminal Block

Category Top Products

192210235

Molex

LUG TERMINAL; Wire Gauge: 2 AWG;

31249116

Metz Connect Usa

The Metz Connect Usa 31249116 is a Barrier Strip Terminal Block with 16 ways, rated for 12A current and 400V voltage. It uses a screw fastening method and accepts wire gauge up to 12 AWG (2.5 mm2). Ideal for CUL, SEV, UL safety approved applications requiring secure electrical connections.

1711026

Phoenix Contact

Phoenix Contact 1711026 is a modular terminal block for BOARD mounting with UL safety approval. It supports wire gauge up to 12 AWG and voltage rating of 250V, ideal for applications requiring a current rating of 24A in a compact design.

1379

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

1SNK510150R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 4 AWG; Safety Approval: UL; Wire Cross Section: 16 mm2; No. of Ways: 1;

282-681

Wago

The Wago 282-681 is a modular terminal block with 3 rows, DIN rail mounting, and CSA/UL safety approvals. It supports wire gauge up to 10 AWG and voltage rating of 600V, ideal for applications requiring a current rating of 30A. Fastened by spring-loaded mechanism, it accommodates wire cross-sections up to 6mm2 efficiently.

2103

Advanced Interconnections

PCB TERMINAL; Manufacturer Series: 2103; Terminal Gender: FEMALE;

1827130

Phoenix Contact

The Phoenix Contact 1827130 is a UL-approved modular terminal block with a rated voltage of 160V and current of 8A. It accommodates wire gauges up to 16 AWG and wire cross-sections of 1.5mm2, featuring a screw fastening method for secure connections. Ideal for applications requiring a reliable connector solution in industrial settings.

323975

TE Connectivity

BUTT TERMINAL; Wire Gauge: 20 AWG; Terminal Gender: FEMALE; Safety Approval: UL; Wire Cross Section: .6 mm2;

1827127

Phoenix Contact

The Phoenix Contact 1827127 is a Barrier Strip Terminal Block with 2 ways, rated for 8A current and 160V voltage. It has safety approvals from CB, CSA, CUL, EAC, EN, UL, VDE. Ideal for connecting wires of 1.5mm² cross-section using screw fastening in applications requiring secure electrical connections.

280-562/281-411

Wago

MODULAR TERMINAL BLOCK;

1725669

Phoenix Contact

Phoenix Contact 1725669 is a BARRIER STRIP TERMINAL BLOCK with 3 ways, rated for 6A current and 63V voltage. It uses SCREW fastening method, supports wire gauge up to 20 AWG, and wire cross section of 0.5 mm2. Ideal for BOARD mounting applications with CSA and UL safety approvals.

1869211

Phoenix Contact

The Phoenix Contact 1869211 is a UL-approved barrier strip terminal block for board mounting. It supports wire gauge up to 16 AWG with a rated voltage of 250V and current of 13.5A. Ideal for applications requiring secure connections in limited space, such as industrial control panels and automation systems.

31425

Tyco Electronics Amp

RING TERMINAL; Wire Gauge: 22 AWG; Wire Cross Section: .4 mm2; Terminal Gender: FEMALE; Safety Approval: UL; No. of Ways: 1;

34541

TE Connectivity

TE Connectivity 34541 is a UL-approved FEMALE FORK TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.65 mm2, it's ideal for various applications in Terminals & Terminal Blocks category.

2-520102-2

TE Connectivity

TE Connectivity 2-520102-2 is a UL-approved TAB TERMINAL for 18 AWG wire with 600V rating. Ideal for male terminals, it supports 0.82 mm2 wire cross section, commonly used in electrical connections.

1757268

Phoenix Contact

The Phoenix Contact 1757268 is a STRIP TERMINAL BLOCK with 1 row and 4 ways. It has a rated voltage of 320V, current of 12A, and can accommodate wire gauge up to 13 AWG. It is commonly used for board mounting in various applications requiring secure electrical connections.

282837-2

Tyco Electronics Amp

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SCREW; Additional Features: STANDARDS: IEC 998-1/998-2-1, PA 6-6, 94V-0; Wire Gauge: 15 AWG; Voltage (Rated): 300 V;

1755736

Phoenix Contact

Phoenix Contact 1755736 is a STRIP TERMINAL BLOCK with 2.5 mm2 wire cross section, rated for 12A current and 320V voltage. It is mounted on BOARD and approved by CB, CCA, CSA, CUL, EAC, UL. Ideal for applications requiring secure connections in industrial settings.

1725656

Phoenix Contact

The Phoenix Contact 1725656 is a BARRIER STRIP TERMINAL BLOCK with BOARD mounting. It has a rated voltage of 160V, current of 6A, and supports wire gauge up to 20 AWG. Ideal for applications requiring secure electrical connections in industrial settings.