Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

XTR105UG4

Manufacturer

Texas Instruments
Manufacturer's Part Number

XTR105UG4
Description

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

RC0603FR-0710KL

Yageo

Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.

Details

SMBJ18CA

Weitron Technology

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

General Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Digitron Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CMX

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

STM32F103C8T6

STMicroelectronics

STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

1N4148

Hitachi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Shandong Yiguang Electronic Joint Stock

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

1N4148

Vicor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

LM107H/883

Texas Instruments

LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

XTR105UG4 Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Time At Peak Reflow Temperature (s):	30 s
Maximum Seated Height:	0.069 in (1.75 mm)
Maximum Supply Voltage Limit:	40 V
Sub-Category:	Instrumentation Amplifiers
Surface Mount:	Yes
Terminal Finish:	Nickel Palladium Gold
No. of Terminals:	14
Maximum Input Offset Voltage:	100 µV
Terminal Position:	Dual
Package Style (Meter):	Small Outline
JESD-30 Code:	R-PDSO-G14
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	SOP
Amplifier Type:	Instrumentation Amplifier
Width:	0.154 in (3.9 mm)
Moisture Sensitivity Level (MSL):	3
Maximum Non Linearity:	0.01 %
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	25 nA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	86 dB
Length:	0.341 in (8.65 mm)
Nominal Supply Voltage / Vsup (V):	24 V
Peak Reflow Temperature (C):	260 °C (500 °F)
Terminal Pitch:	0.05 in (1.27 mm)
Maximum Input Offset Current (IIO):	3 nA
Temperature Grade:	Industrial

Category Top Products

INA155UA/2K5

Texas Instruments

INA155UA/2K5 by Texas Instruments is a CMOS instrumentation amplifier with a max input offset voltage of 1000 uV and a max average bias current of 0.00001 uA. It is commonly used in military applications due to its temperature grade and moisture sensitivity level.

INA2126EA/250G4

Texas Instruments

INA2126EA/250G4 by Texas Instruments is a plastic/epoxy instrumentation amplifier with a max input offset voltage of 500 uV and a max average bias current of 0.05 uA. It is commonly used in industrial applications due to its wide temperature range and high common mode reject ratio.

AD8221AR-REEL7

Analog Devices

AD8221AR-REEL7 by Analog Devices is an instrumentation amplifier with 60uV max input offset voltage, 0.0015uA max average bias current, and 1000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85 °C operating temperature range.

XTR106UAG4

Texas Instruments

XTR106UAG4 by Texas Instruments is an instrumentation amplifier with 250uV max input offset voltage, 0.05uA max average bias current, and 24V nominal voltage. Ideal for industrial applications due to its high common mode reject ratio of 86dB and operating temperature range from -40°C to 85°C.

LT1102IN8#PBF

Analog Devices

LT1102IN8#PBF by Analog Devices is an instrumentation amplifier with 2000uV max input offset voltage, 0.015uA max average bias current, and 3.5MHz nominal bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact IN-LINE package with -40 to 85 °C operating temperature range.

XTR105UAG4

Texas Instruments

XTR105UAG4 by Texas Instruments is an instrumentation amplifier with 250uV max input offset voltage, 0.05uA max average bias current, and 24V nominal voltage. Ideal for industrial applications requiring high common mode reject ratio of 86dB and operating temperature range from -40 to 85°C.

INA851RGTR

Texas Instruments

INA851RGTR by Texas Instruments is a 16-terminal instrumentation amplifier with a max input offset voltage of 35uV and nominal voltage of 15V. With a bandwidth of 22MHz, it's ideal for applications requiring high precision amplification in temperature-sensitive environments. The chip carrier package makes it suitable for surface mount designs with limited space constraints.

AD8226ARMZ-R7

Analog Devices

AD8226ARMZ-R7 by Analog Devices is an instrumentation amplifier with 100uV max input offset voltage, 1.5MHz bandwidth, and 80dB min CMRR. Ideal for automotive applications due to its -40 to 125 °C operating temp range and small outline package style.

LT1167ACS8

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LMP8602MM

Texas Instruments

LMP8602MM by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 1000uV and a nominal voltage of 3.3V. With a min common mode reject ratio of 90dB, it is ideal for automotive applications requiring precise signal amplification in compact spaces. The package style is small outline, thin profile, shrink pitch, making it suitable for surface mount designs with limited space constraints.

AD526AD

Analog Devices

AD526AD by Analog Devices is an Instrumentation Amplifier with 700uV Max Input Offset Voltage, 0.00015uA Max Average Bias Current, and 4MHz Nominal Bandwidth. Ideal for industrial applications requiring precise signal amplification in a compact package.

LT1102CN8#PBF

Analog Devices

LT1102CN8#PBF by Analog Devices is an Instrumentation Amplifier with 1400uV Max Input Offset Voltage, 0.0004uA Max Average Bias Current, and 3.5MHz Nominal Bandwidth. Ideal for precision signal processing in commercial applications requiring high common mode rejection ratio and low input offset voltage.

LTC6910-2ITS8#TRMPBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR;

INA128UAG4

Texas Instruments

INA128UAG4 by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 1125uV and max supply voltage of ±15V. It has a nominal bandwidth of 1.3MHz, making it suitable for automotive applications requiring precise signal amplification in tight spaces. With a compact rectangular package style and low bias current of 0.01uA, it is ideal for high-gain amplification in temperature-sensitive environments.

AMP04FSZ-RL

Analog Devices

AMP04FSZ-RL by Analog Devices is an instrumentation amplifier with a max input offset voltage of 900uV and max average bias current of 0.06uA. It operates at a nominal voltage of 15V, has a bandwidth of 0.7MHz, and is ideal for industrial applications requiring precise signal amplification in compact spaces.

PGA103P

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

INA126UA/2K5

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

LTC2053IMS8#TR

Analog Devices

LTC2053IMS8#TR by Analog Devices is an instrumentation amplifier with 20uV max input offset voltage, 0.01uA max average bias current, and 0.003uA max input offset current. Ideal for industrial applications requiring precise signal amplification in a compact package.

AD623AR-REEL7

Analog Devices

AD623AR-REEL7 by Analog Devices is an instrumentation amplifier with a max voltage gain of 1000 and bandwidth of 0.8 MHz. It operates within -40 to 85 °C temperature range, ideal for industrial applications requiring precise signal amplification in compact spaces. The surface-mount package with dual terminals and small outline makes it suitable for space-constrained designs.

INA103KU/1K

Texas Instruments

INA103KU/1K by Texas Instruments is an instrumentation amplifier with 250uV max input offset voltage, 12uA max average bias current, and 6MHz nominal bandwidth. Ideal for precision signal processing in applications requiring high gain accuracy and low noise performance.