Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

TPS70933DBVR

Manufacturer

Texas Instruments
Manufacturer's Part Number

TPS70933DBVR
Description

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Nominal Output Voltage-1: 3.3 V;
Datasheet

Datasheet

Not In Stock

Popular Products

DS18B20

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

Details

MBRA160T3G

Onsemi

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Central Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;

Details

SS14

Zowie Technology

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;

Details

2N7002

General Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;

Details

2N2222A

Dionics-usa

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Vishay Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EPCS4SI8N

Altera

CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;

Details

2N7002-7-F

Diodes Incorporated

Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.

Details

BAV99

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDN306P

Onsemi

FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Comchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

BSS138-7-F

Diodes Incorporated

Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.

Details

KSZ9031RNXIA

Micrel

ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

Details

TPS70933DBVR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.45 mm
Surface Mount:	YES
Regulator Type:	FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Outputs:	1
Maximum Output Current-1:	.15 A
No. of Terminals:	5
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, LOW PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G5
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Nominal Output Voltage-1:	3.3 V
Operating Temperature (TJ-Max):	125 Cel
Package Code:	LSSOP
Width:	1.6 mm
Maximum Dropout Voltage-1:	1.4 V
Moisture Sensitivity Level (MSL):	1
Minimum Input Voltage:	4.3 V
Maximum Output Voltage-1:	3.333 V
Maximum Input Voltage:	30 V
Minimum Output Voltage-1:	3.267 V
JESD-609 Code:	e4
Maximum Voltage Tolerance:	2 %
No. of Functions:	1
Nominal Dropout Voltage-1:	.3 V
Operating Temperature (TJ-Min):	-40 Cel
Length:	2.9 mm
Adjustability:	FIXED
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm

Category Top Products

TPS76350DBVTG4

Texas Instruments

TPS76350DBVTG4 by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.15A. It operates in an input voltage range of 5.5V to 10V, making it suitable for various applications requiring stable power supply within tight voltage tolerances. With a compact package style and low profile design, it is ideal for space-constrained electronic devices where reliable voltage regulation is essential.

MIC5504-3.3YM5-T5

Microchip Technology

MIC5504-3.3YM5-T5 by Microchip is a CMOS LDO regulator with 3.3V output, 0.3A max current, and 1.45mm seated height. Ideal for applications requiring fixed positive single output regulators in automotive electronics due to TS 16949 screening level and -40 to 125 °C operating temperature range.

LT1963AEST-3.3#PBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;

LP2985AIM5-2.5/NOPB

Texas Instruments

LP2985AIM5-2.5/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 2.5V Nominal Output Voltage, 0.15A Max Output Current, and 3.5% Max Voltage Tolerance. Ideal for applications requiring low dropout voltage and precise voltage regulation in compact designs.

LP2951ACD-3.3R2G

Onsemi

LP2951ACD-3.3R2G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It features a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring precise voltage regulation in compact electronic devices.

LT1764AEQ-1.5#PBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.53 %;

TPS79933DDCR

Texas Instruments

TPS79933DDCR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, thin profile, shrink pitch, ideal for surface mount designs.

AP2210K-3.3TRG1

Diodes Incorporated

Diodes Inc. AP2210K-3.3TRG1 is a 3.3V fixed positive single output LDO regulator with max dropout voltage of 0.5V and max output current of 0.3A, suitable for applications requiring stable voltage supply in compact spaces like consumer electronics and IoT devices.

LM1117IMP-3.3

Texas Instruments

LM1117IMP-3.3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.8A max output current, and 1.4V max dropout voltage. Ideal for applications requiring stable voltage regulation in compact spaces with limited input voltage range and tight load regulation requirements.

TLV1117-33CDCYRG3

Texas Instruments

TLV1117-33CDCYRG3 by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.8A max output current, and 1.2V nominal dropout voltage. It is ideal for applications requiring stable voltage regulation in a compact package, suitable for surface mount assembly with a max operating temperature of 125°C.

LT1764AEQ-3.3#TRPBF

Linear Technology

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.54 %;

NCP1117DT50RKG

Onsemi

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;

LP38693MP-5.0/NOPB

Texas Instruments

LP38693MP-5.0/NOPB by Texas Instruments is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.5A Max Output Current, and 4% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.

LM2936MX-3.3/NOPB

Texas Instruments

LM2936MX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.05A. It has a small outline package style, operates b/w -40 to 125 °C, and is ideal for applications requiring low dropout voltage and precise voltage regulation.

LP2980IM5-2.5/NOPB

National Semiconductor

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;

NCP163ASN330T1G

Onsemi

NCP163ASN330T1G by Onsemi is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.

LP38690SD-3.3/NOPB

Texas Instruments

LP38690SD-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 1A max output current, 3.3V nominal output voltage, and 5% max voltage tolerance. It operates b/w -40 to 125°C making it suitable for various applications requiring stable voltage regulation in compact spaces.

REG1117-3.3/2K5

Burr-Brown Corporation

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 15 V; Maximum Voltage Tolerance: 1.8 %; Package Body Material: PLASTIC/EPOXY;

TLV1117-33CDCYG3

Texas Instruments

FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.75 %;

MCP1702T-5002E/MBVAO

Microchip Technology

MCP1702T-5002E/MBVAO by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.