Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

OPA842IDBVRG4

Manufacturer

Texas Instruments
Manufacturer's Part Number

OPA842IDBVRG4
Description

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

LL4148

Micronas Semiconductor Holding Ag

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;

Details

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Micro Commercial Components

Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138PS,115

Nexperia

N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

2N7002

Itt Semiconductor

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;

Details

BSS123-7-F

Diodes Incorporated

BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.

Details

2N7002

Continental Device India

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

2N2222A

Semicoa

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Motorola

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA842IDBVRG4 Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Time At Peak Reflow Temperature (s):	30 s
Low-Bias:	No
Sub-Category:	Operational Amplifiers
Surface Mount:	Yes
Maximum Input Offset Voltage:	1500 uV
Technology:	BIPOLAR
Minimum Voltage Gain:	10000
Package Shape:	Rectangular
Terminal Form:	Gull Wing
Package Code:	LSSOP
Amplifier Type:	Operational Amplifier
Moisture Sensitivity Level (MSL):	2
Architecture:	Voltage Feedback
Packing Method:	Tape And Reel
Programmable Power:	No
Nominal Negative Supply Voltage (Vsup):	-5 V
Qualification:	No
Peak Reflow Temperature (C):	260 °C (500 °F)
Terminal Pitch:	0.037 in (0.95 mm)
Maximum Seated Height:	0.057 in (1.45 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	6.5 V
Maximum Bias Current (IIB) @25C:	35 uA
Maximum Supply Current:	22.5 mA
Terminal Finish:	Nickel Palladium Gold
No. of Terminals:	5
Minimum Slew Rate:	225 V/us
Nominal Unity Gain Bandwidth:	350 MHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline, Low Profile, Shrink Pitch
JESD-30 Code:	R-PDSO-G5
Low-Offset:	No
Maximum Operating Temperature:	85 °C (185 °F)
Width:	0.063 in (1.6 mm)
Nominal Common Mode Reject Ratio:	82 dB
Micropower:	No
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	37 uA
No. of Functions:	1
Minimum Common Mode Reject Ratio:	85 dB
Length:	0.114 in (2.9 mm)
Nominal Supply Voltage / Vsup (V):	5 V
Maximum Negative Supply Voltage Limit:	-6.5 V
Maximum Input Offset Current (IIO):	1 uA
Power:	No
Temperature Grade:	Industrial
Wideband:	Yes

Category Top Products

INA200AIDGKRG4

Texas Instruments

Texas Instruments' INA200AIDGKRG4 is an operational amplifier with a max input offset voltage of 2500uV and max average bias current of 16uA. It operates in a temperature range from -40 to 125 °C and is ideal for automotive applications due to its compact size, low power consumption, and high common mode voltage tolerance up to 80V.

OPA2132UA/2K5

Texas Instruments

OPA2132UA/2K5 by Texas Instruments is a dual operational amplifier with 500uV max input offset voltage and 100dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, has a unity gain bandwidth of 8MHz, and low bias current of 0.00005uA.

OPA2211AIDDAR

Texas Instruments

OPA2211AIDDAR by Texas Instruments is a dual operational amplifier with low offset voltage of 150uV and bias current of 0.25uA. It operates at a wide temperature range from -40 to 125°C, making it suitable for automotive applications. With a unity gain bandwidth of 45MHz, this op amp is ideal for precision signal conditioning in various electronic systems.

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

LM741CN

Harris Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

LM2904DR

Texas Instruments

LM2904DR by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 10000 uV and a nominal voltage of 5 V. Ideal for automotive applications, this Op Amp has a small outline package style and operates within a temperature range of -40 to 125 °C.

INA138NA/3KG4

Texas Instruments

INA138NA/3KG4 by Texas Instruments is a 5-terminal Op Amp with Vsup of 5V, offering high CMRR of 120 dB and low IIB of 10 uA. Ideal for automotive applications due to its compact size, low power consumption, and wide temperature range from -40 to 125 °C.

LM741CH

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Negative Supply Voltage (Vsup): -15 V;

OPA551UA/2K5E4

Texas Instruments

OPA551UA/2K5E4 by Texas Instruments is an Operational Amplifier with a max input offset voltage of 5000uV and nominal common mode reject ratio of 102dB. It operates at temperatures ranging from -40 to 125°C, making it suitable for automotive applications. With a unity gain bandwidth of 3000kHz, this Op Amp is ideal for high-performance audio and signal processing systems.

LM107H

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;

OPA2192IDR

Texas Instruments

OPA2192IDR by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It offers a max input offset voltage of 25uV, nominal common mode reject ratio of 120dB, and nominal unity gain bandwidth of 10MHz. Ideal for automotive applications due to its temperature grade and small outline package style.

LM324DRG4

Texas Instruments

LM324DRG4 by Texas Instruments is a quad operational amplifier with 14 terminals. It features a max input offset voltage of 9000 uV and a nominal voltage of 5 V. Widely used in applications requiring low-bias current, micropower consumption, and high common mode rejection ratio.

MC33079DT

STMicroelectronics

MC33079DT by STMicroelectronics is a 4-function operational amplifier with max input offset voltage of 3500uV and min slew rate of 5V/us. Widely used in industrial applications, it operates at temperatures ranging from -40 to 105°C, making it suitable for various voltage-feedback amplifier circuits.

LM324PT

ROHM

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: TSSOP; Package Shape: RECTANGULAR;

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

INA240A2EDRQ1

Texas Instruments

Texas Instruments' INA240A2EDRQ1 is an Op Amp with 25uV Max Input Offset Voltage, 132dB CMRR, and 400kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, it operates from -40°C to 150°C with a supply voltage of 5V.

LM324NSR

Texas Instruments

LM324NSR by Texas Instruments is a quad operational amplifier with 4 functions. It features low bias current (-0.5 uA) and micropower technology, suitable for applications requiring high voltage gain (15k) and frequency compensation (1200 kHz). Ideal for commercial-grade projects needing precise voltage feedback in a compact package.

OPA2227UG4

Texas Instruments

OPA2227UG4 by Texas Instruments is an Operational Amplifier with low offset voltage of 100uV, bias current of 0.01uA, and common mode reject ratio of 138dB. Ideal for industrial applications requiring precise signal amplification in a compact package with dual terminals and voltage-feedback architecture.

MC33078DR2G

Onsemi

MC33078DR2G by Onsemi is a dual operational amplifier with 3000uV max input offset voltage and 100dB nominal CMRR. Ideal for industrial applications, it operates at -40 to 85°C, has a unity gain bandwidth of 16MHz, and consumes up to 5.5mA supply current.

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;