Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

OPA171AIDRLT

Manufacturer

Texas Instruments
Manufacturer's Part Number

OPA171AIDRLT
Description

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 5; Package Code: VSOF; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

LL4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N7002

Inter F E T

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;

Details

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

1N4148

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Onsemi

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

2N2222A

Rectron

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

M24308/2-1F

TE Connectivity

TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.

Details

1N4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;

Details

SMBJ18CA

Microsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Microchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

LM317TG

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;

Details

1N4148W-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SS14

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA171AIDRLT Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	Yes
Sub-Category:	Operational Amplifiers
Surface Mount:	Yes
Maximum Input Offset Voltage:	2000 uV
Technology:	BIPOLAR
Minimum Voltage Gain:	316000
Package Shape:	Rectangular
Terminal Form:	Flat
Package Code:	VSOF
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	1.5 V/us
Moisture Sensitivity Level (MSL):	1
Architecture:	Voltage Feedback
Packing Method:	Tape And Reel
Programmable Power:	No
Nominal Negative Supply Voltage (Vsup):	-18 V
Qualification:	No
Package Equivalence Code:	FL5/6,.047,20
Peak Reflow Temperature (C):	260 °C (500 °F)
Terminal Pitch:	0.02 in (0.5 mm)
Maximum Seated Height:	0.024 in (0.6 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	20 V
Maximum Bias Current (IIB) @25C:	15 pA
Maximum Supply Current:	595 μA
Terminal Finish:	Nickel/Palladium/Gold/Silver
No. of Terminals:	5
Nominal Unity Gain Bandwidth:	3 MHz
Terminal Position:	Dual
Package Style (Meter):	Small Outline, Very Thin Profile
JESD-30 Code:	R-PDSO-F5
Low-Offset:	No
Maximum Operating Temperature:	125 °C (257 °F)
Width:	0.047 in (1.2 mm)
Nominal Common Mode Reject Ratio:	120 dB
Micropower:	Yes
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	3.5 nA
No. of Functions:	1
Minimum Common Mode Reject Ratio:	104 dB
Length:	0.063 in (1.6 mm)
Nominal Supply Voltage / Vsup (V):	18 V
Maximum Negative Supply Voltage Limit:	-20 V
Maximum Input Offset Current (IIO):	3.5 nA
Power:	No
Temperature Grade:	Automotive
Wideband:	No
Power Supplies (V):	±1.35/±18/2.7/36 V

Category Top Products

JM38510/13501BGA

Linear Technology

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

INA193AIDBVR

Texas Instruments

Texas Instruments' INA193AIDBVR is a 5-terminal operational amplifier with a unity gain bandwidth of 500 kHz and common mode reject ratio of 100 dB. Ideal for automotive applications, it operates b/w -40 to 125°C, with a max common mode voltage of 80 V. The compact package style makes it suitable for space-constrained designs.

OP07CP

Analog Devices

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

LM358MX

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA240A1QDRQ1

Texas Instruments

Texas Instruments' INA240A1QDRQ1 is an Operational Amplifier with 25uV Max Input Offset Voltage, 132dB CMRR, and 400kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, it operates from -40°C to 125°C with a supply voltage of 5V.

MCP6002T-I/SN

Microchip Technology

MCP6002T-I/SN by Microchip Technology is a CMOS Operational Amplifier with 2 functions, 4500uV input offset voltage, and 1000kHz unity gain bandwidth. Ideal for industrial applications requiring low-bias, micropower amplification in a small outline package.

LM324D

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

OPA656NB/250

Texas Instruments

OPA656NB/250 by Texas Instruments is a voltage-feedback operational amplifier with a unity gain bandwidth of 500 kHz. It features a max input offset voltage of 600 uV and operates at an industrial temperature grade range from -40 to 85 °C. Ideal for applications requiring high precision and low power consumption in compact designs.

LM358DRG4

Texas Instruments

LM358DRG4 by Texas Instruments is an Operational Amplifier with 2 functions, VOLTAGE-FEEDBACK architecture, and BIPOLAR technology. It has a Nominal Unity Gain Bandwidth of 700 kHz, Max Input Offset Voltage of 9000 uV, and Nominal Voltage of 5V. Widely used in commercial applications for its high Common Mode Reject Ratio and low Bias Current.

TL074ID

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

LM2904M

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

OPA549S

Texas Instruments

OPA549S by Texas Instruments is an operational amplifier with a max input offset voltage of 5000 uV, common mode reject ratio of 95 dB, and unity gain bandwidth of 900 kHz. Ideal for industrial applications requiring precise signal amplification in a compact package with programmable power options.

LM358DR

Texas Instruments

LM358DR by Texas Instruments is a dual operational amplifier with 2 functions. It features a max input offset voltage of 9000 uV and nominal voltage of 5 V, suitable for applications requiring high common mode rejection ratio and low bias current. With a small outline package style, it is ideal for commercial-grade circuits needing precise amplification within temperature range of 0-70 °C.

THS4522IPW

Texas Instruments

THS4522IPW by Texas Instruments is a dual operational amplifier with 9.3 MHz bandwidth, 145000 kHz unity gain bandwidth, and 102 dB common mode reject ratio. Ideal for industrial applications requiring high voltage feedback architecture, it operates at -40 to 85 °C with low bias current of 0.9 uA @25C.

OPA4376AIPW

Texas Instruments

OPA4376AIPW by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias characteristics. It has a max input offset voltage of 25 uV, a max average bias current of 0.00001 uA, and a nominal unity gain bandwidth of 5500 kHz. This amplifier is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

TL072IDRE4

Texas Instruments

TL072IDRE4 by Texas Instruments is a dual operational amplifier with 8 terminals. It offers a min voltage gain of 25,000 and a nominal unity gain bandwidth of 3,000 kHz. Ideal for industrial applications requiring low-bias current amplification in a compact small outline package.

OPA365AIDBVTG4

Texas Instruments

OPA365AIDBVTG4 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It operates at a max supply voltage of 5.5V, offers a nominal unity gain bandwidth of 50kHz, and has a small outline package style suitable for automotive applications.

JM38510/11405BGA

Analog Devices

JM38510/11405BGA by Analog Devices is a MILITARY-grade Operational Amplifier with 8 terminals in a CYLINDRICAL package. It offers high voltage gain of 25k, low input offset voltage of 2500 uV, and fast slew rate of 10 V/us. Ideal for applications requiring precision amplification in harsh environments.

LMC7101AIM5X/NOPB

Texas Instruments

LMC7101AIM5X/NOPB by Texas Instruments is a micropower operational amplifier with low bias current (0.000064 uA) and high common mode rejection ratio (74 dB). Ideal for industrial applications, it operates at temperatures ranging from -40 to 85 °C and has a unity gain bandwidth of 1000 kHz.

INA149AIDR

Texas Instruments

INA149AIDR by Texas Instruments is an operational amplifier with 1100uV max input offset voltage, 100dB CMRR, and 1.7V/us min slew rate. Widely used in automotive applications due to its micropower technology, -40 to 125°C operating temperature range, and compact small outline package design.