Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
4,421	$2.328	$10,289.878

MAX3232EIDW

Manufacturer

Texas Instruments
Manufacturer's Part Number

MAX3232EIDW
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

4421 In Stock

Popular Products

BAV99

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN65HVD234DR

Texas Instruments

SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.

Details

1N4148WT

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

BAV99LT1G

Onsemi

BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.

Details

SZNUP2105LT1G

Onsemi

SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.

Details

LM358N

Taejin Technology

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148WS

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BAV99

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720A-CP-TR

Microchip Technology

LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.

Details

LM358MX

Texas Instruments

LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.

Details

ERJU06F10R0V

Panasonic

ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.

Details

SS14

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Renesas Electronics

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LIS2DH12TR

STMicroelectronics

LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56351

Esterline Technologies

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;

Details

MAX3232EIDW Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	2.65 mm
Minimum Out Swing:	10 V
Maximum High Level Input Current:	.000001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	Nickel/Palladium/Gold (Ni/Pd/Au)
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	SOP
Interface Standard:	EIA-232-F; TIA-232-F; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	7.5 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	1
Other Names:	296-33387-5 MAX3232EIDW-ND
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	2
Maximum Supply Voltage:	3.6 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	2
Qualification:	Not Qualified
Package Equivalence Code:	SOP16,.4
Receiver No. of Bits:	2
Length:	10.3 mm
Maximum Receive Delay:	300 ns
Additional Features:	CAN ALSO OPERATE WITH 5V SUPPLY
Peak Reflow Temperature (C):	260
Terminal Pitch:	1.27 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3/5

Category Top Products

ISO1412DW

Texas Instruments

ISO1412DW by Texas Instruments is a line driver/receiver with 16 terminals, operating at -40 to 125°C. It features EIA-485-A and EIA-422 interface standards, with differential output and Schmitt trigger input characteristics. Ideal for automotive applications due to its small outline package and nickel palladium gold terminal finish.

ISL83483IBZ-T

Renesas Electronics

ISL83483IBZ-T by Renesas Electronics is an 8-terminal line driver with a max supply voltage of 3.6V and differential output. It operates in industrial temperatures (-40 to 85°C) and supports EIA-485/EIA-422 interfaces, making it ideal for communication applications requiring reliable signal transmission over short distances.

DS26C32ATMDC

Texas Instruments

DS26C32ATMDC by Texas Instruments is a CMOS line receiver with 4 functions, operating at -40 to 85°C. It supports EIA-422, EIA-423, FED STD 1020, and FED STD 1030 interface standards. Ideal for industrial applications requiring differential Schmitt trigger input characteristics and a max receive delay of 30 ns.

MAX232ACSE-T

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

ISO3086TDW

Texas Instruments

ISO3086TDW by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features differential output, EIA-422/EIA-485 interface standards, and a max transmit delay of 45ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.

MAX3485ESA+

Maxim Integrated

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SP3232EBCN-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX3232MPWREP

Texas Instruments

MAX3232MPWREP by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F; TIA-232-F; V.28 interface standards. Ideal for military-grade applications due to its wide temperature range from -55 to 125°C and Schmitt trigger input characteristics.

LTC485IN8#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

MAX3295AUT-T

Analog Devices

MAX3295AUT-T by Analog Devices is a line driver & receiver with a max supply voltage of 3.465V and a max transmit delay of 25ns. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

LTC2870IUFD#PBF

Linear Technology

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR;

SP3485EN-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

ICL3221EIAZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;

ST3232BTR

STMicroelectronics

ST3232BTR by STMicroelectronics is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features CMOS technology, EIA-232 interface standard, and Schmitt trigger input characteristics. Ideal for industrial applications requiring reliable data transmission in temperature range of -40 to 85°C.

LTC1387IG#PBF

Analog Devices

LTC1387IG#PBF by Analog Devices is a Line Transceiver with CMOS technology. It operates in industrial temperature range (-40 to 85 °C) and supports EIA-232, EIA-422, EIA-485, and EIA-562 interfaces. With differential output and Schmitt trigger input characteristics, it's ideal for applications requiring reliable data transmission over short distances.

ISL81387IAZ-T7A

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;

ISL3295EIHZ-T

Renesas Electronics

ISL3295EIHZ-T by Renesas Electronics is a line driver and receiver with a max supply voltage of 5.5V. It has a small outline, low profile package style and is suitable for industrial temperature grade applications. This interface IC type supports EIA-485 and EIA-422 standards.

MAX232CSE+T

Analog Devices

Analog Devices' MAX232CSE+T is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 10000ns and operates b/w temperatures of 0-70°C. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial applications requiring inverted output polarity.

ISL3232EIRZ-T7A

Renesas Electronics

LINE TRANSCEIVER; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 2; Terminal Finish: MATTE TIN;

MAX202ECSE+T

Analog Devices

MAX202ECSE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It features a small outline package style, CMOS technology, and EIA-232-E interface standard. Ideal for applications requiring inverted output polarity and Schmitt trigger input characteristics in commercial temperature grade environments.