Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MAX3221EIPWR

Manufacturer

Texas Instruments
Manufacturer's Part Number

MAX3221EIPWR
Description

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

SS14

Forward International Electronics

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;

Details

1N4148WS

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NUP2105LT1G

Onsemi

NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.

Details

2N2222A

Itt Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Rectron

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

MS3V-T1R32.768KHZ+/-20PPM12.5PF

Golledge Electronics

MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.

Details

1N4148

Cheng-yi Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Amphenol

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;

Details

1N4148

Iskra Semic Capacitors Industry

RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;

Details

LM2931AZ-5.0RPG

Onsemi

LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.

Details

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

Details

ECA2DHG4R7

Panasonic

ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

CRCW040210K0FKED

Vishay Intertechnology

Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

MAX3221EIPWR Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Minimum Supply Voltage-1:	3 V
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	30
Maximum Seated Height:	1.2 mm
Minimum Out Swing:	10 V
Maximum High Level Input Current:	.000001 Amp
Sub-Category:	Line Driver or Receivers
Surface Mount:	YES
Maximum Supply Current:	1 mA
Terminal Finish:	NICKEL PALLADIUM GOLD
No. of Terminals:	16
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
JESD-30 Code:	R-PDSO-G16
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	85 Cel
Package Code:	TSSOP
Interface Standard:	EIA-232-F; TIA-232-F; V.28
Interface IC Type:	LINE TRANSCEIVER
Width:	4.4 mm
Nominal Supply Voltage-1:	3.3 V
Maximum Supply Voltage-1:	3.6 V
Maximum Output Low Current:	1.6 Amp
Moisture Sensitivity Level (MSL):	1
Output Polarity:	INVERTED
Input Characteristics:	SCHMITT TRIGGER
Driver No. of Bits:	1
Maximum Supply Voltage:	3.6 V
Differential Output:	NO
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	TSSOP16,.25
Receiver No. of Bits:	1
Length:	5 mm
Maximum Receive Delay:	150 ns
Additional Features:	ALSO OPERATES AT 5V SUPPLY
Peak Reflow Temperature (C):	260
Terminal Pitch:	.65 mm
Temperature Grade:	INDUSTRIAL
Power Supplies (V):	3.3/5

Category Top Products

MAX3232EIDBRE4

Texas Instruments

MAX3232EIDBRE4 by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 16 terminals, and 1mA max supply current. It operates in industrial temperature range (-40 to 85 °C) and interfaces using EIA-232-F, TIA-232-F, V.28 standards. Ideal for applications requiring inverted output polarity and Schmitt trigger input characteristics.

ADM1485ARZ-REEL7

Analog Devices

ADM1485ARZ-REEL7 by Analog Devices is a BICMOS Line Transceiver with EIA-422 and EIA-485 interface standards. It operates at 5V, has a max supply voltage of 5.25V, and can handle industrial temperature grades. Ideal for applications requiring differential Schmitt trigger input characteristics in communication systems.

ZIOL2401#W

Integrated Device Technology

Line Driver or Receivers;

DS91M040TSQ/NOPB

National Semiconductor

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;

SN65C1168ENSR

Texas Instruments

SN65C1168ENSR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features a max transmit delay of 16ns and can withstand industrial temperatures from -40 to 85°C. Ideal for EIA-422-B, TIA-422-B, V.11 interfaces in various applications requiring differential outputs.

MAX22025AWA+T

Maxim Integrated

Line Driver or Receivers; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3;

SP3232EEN-L/TR

Exar

Exar's SP3232EEN-L/TR is a 16-terminal line driver/receiver with 3-5V power supplies. It operates in industrial temperatures (-40 to 85°C) and supports EIA-232, V.24 interfaces. With dual terminals and Schmitt trigger input characteristics, it's ideal for data communication applications.

MAX256ASA+T

Maxim Integrated

LINE DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;

MAX3490EESA

Maxim Integrated

MAX3490EESA by Maxim Integrated is a line driver/receiver with 3.3V supply, 35ns transmit delay, and EIA-422/EIA-485 interface standards. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.

MAX232ACSE

Rochester Electronics

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

SP3485EN-L

Sipex

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

SN75176ADR

Texas Instruments

SN75176ADR by Texas Instruments is a Line Driver & Receiver with 5.25V max supply voltage, 60ns max transmit delay, and 8A max output low current. It is used in V.11 and EIA-422-B interface standards for commercial temperature grade applications.

MAX3430ESA+T

Analog Devices

MAX3430ESA+T by Analog Devices is a BICMOS line transceiver with EIA-422, EIA-485, TIA-485 interface standards. It operates at 3.3V with 8 terminals and offers differential output. Ideal for industrial applications requiring reliable communication over short distances.

SP3232EBCN-L/TR

Maxlinear

LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;

MAX485EESA+

Analog Devices

MAX485EESA+ by Analog Devices is a CMOS line transceiver with EIA-422/EIA-485 interface. It operates at 5V, has 8 terminals, and offers differential output. With a max transmit delay of 60ns, it's ideal for industrial applications requiring reliable communication over short distances.

THVD1420DRLR

Texas Instruments

THVD1420DRLR by Texas Instruments is a line driver & receiver with 8 terminals, operating at -40 to 125 °C. It features a max supply voltage of 5.5 V, transmit delay of 38 ns, and differential output. Ideal for automotive applications requiring EIA-485-A interface standard compliance.

ISL83485IBZ

Renesas Electronics

ISL83485IBZ by Renesas Electronics is an EIA-485/EIA-422 line transceiver with a 3.3V nominal voltage and BICMOS technology. It features differential output, dual terminal position, and a small outline package style for industrial applications requiring reliable communication over long distances. With a max transmit delay of 35ns and receive delay of 90ns, it ensures efficient data transmission in harsh environments.

ISL3232EIRZ-T

Intersil

LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;

MAX3471EUA

Maxim Integrated

MAX3471EUA by Maxim Integrated is a line driver with 3/5V power supplies, EIA-422/EIA-485 interface standards, and 2000ns max transmit delay. It is used in industrial applications for differential output communication over short distances.

ISL83490IBZ-T

Renesas Electronics

ISL83490IBZ-T by Renesas Electronics is an 8-terminal line transceiver with a max supply voltage of 3.6V and differential output. It operates in industrial temperatures (-40 to 85°C) and supports EIA-485/EIA-422 interface standards, making it ideal for applications requiring reliable data transmission over long distances.