Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LT1014CN

Manufacturer

Texas Instruments
Manufacturer's Part Number

LT1014CN
Description

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

OPA2277UA/2K5

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

M39029/58-360

Itt Cannon

CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;

Details

LL4148

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Cobham Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;

Details

SMBJ18CA

Bytesonic Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

1N4148

Forward International Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;

Details

SMBJ18CA

Synsemi

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

LL4148

TDK

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;

Details

BAV99

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

STMicroelectronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;

Details

1N4148

Synsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Sangdest Microelectronics (Nanjing)

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Weitronic Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M24308/2-1F

Cristek Interconnects

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

0462-201-16141

TE Connectivity

TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.

Details

LT1014CN Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Low-Bias:	No
Sub-Category:	Operational Amplifiers
Surface Mount:	No
Maximum Input Offset Voltage:	550 uV
Technology:	BIPOLAR
Minimum Voltage Gain:	700000
Package Shape:	Rectangular
Terminal Form:	Through-Hole
Package Code:	DIP
Amplifier Type:	Operational Amplifier
Nominal Slow Rate:	0.4 V/us
Architecture:	Voltage Feedback
Packing Method:	Tube
Programmable Power:	No
Nominal Negative Supply Voltage (Vsup):	-15 V
Qualification:	No
Package Equivalence Code:	DIP14,.3
Terminal Pitch:	0.1 in (2.54 mm)
Maximum Seated Height:	0.2 in (5.08 mm)
Frequency Compensation:	Yes
Maximum Supply Voltage Limit:	22 V
Maximum Bias Current (IIB) @25C:	30 nA
Maximum Supply Current:	2.2 mA
Terminal Finish:	Nickel/Palladium/Gold
No. of Terminals:	16
Minimum Slew Rate:	0.2 V/us
Nominal Unity Gain Bandwidth:	700 kHz
Terminal Position:	Dual
Package Style (Meter):	In Line
JESD-30 Code:	R-PDIP-T16
Low-Offset:	Yes
Maximum Operating Temperature:	70 °C (158 °F)
Width:	0.3 in (7.62 mm)
Nominal Common Mode Reject Ratio:	117 dB
Micropower:	Yes
JESD-609 Code:	e4
Minimum Operating Temperature:	0 °C (32 °F)
Maximum Average Bias Current (IIB):	-38 nA
No. of Functions:	4
Minimum Common Mode Reject Ratio:	97 dB
Length:	0.76 in (19.305 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Maximum Negative Supply Voltage Limit:	-22 V
Maximum Input Offset Current (IIO):	2 nA
Power:	No
Temperature Grade:	Commercial
Wideband:	No
Power Supplies (V):	5/±15 V

Category Top Products

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

INA240A3QPWRQ1

Texas Instruments

Texas Instruments' INA240A3QPWRQ1 is an Operational Amplifier with 25uV Max Input Offset Voltage, 132dB CMRR, and 400kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, -40 to 125°C operating temp range, and compact design with small outline package.

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

INA105KU

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

JM38510/11402BPA

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

OPA2192ID

Texas Instruments

OPA2192ID by Texas Instruments is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 10MHz, and operates at temperatures ranging from -40 to 125°C. Ideal for automotive applications due to its small outline package and high common mode rejection ratio.

AD8479ARZ-RL

Analog Devices

AD8479ARZ-RL by Analog Devices is an Operational Amplifier with a peak reflow temperature of 260°C for 30s. It features matte tin terminal finish, TR packing method, and MSL of 3. Ideal for precision signal conditioning in industrial automation and instrumentation applications.

LM2902N

Texas Instruments

LM2902N by Texas Instruments is an Operational Amplifier with 4 functions, 14 terminals, and a max supply voltage of 26V. It features low-bias current (0.25uA @25C), micropower design, and nominal unity gain bandwidth of 1200 kHz. Ideal for automotive applications due to its temperature grade and high common mode rejection ratio.

TLC272CDR

Texas Instruments

TLC272CDR by Texas Instruments is a dual operational amplifier with 2 functions. It features a max input offset voltage of 12000 uV and a nominal unity gain bandwidth of 1700 kHz. Ideal for applications requiring low-bias current, such as precision signal conditioning and sensor interfaces.

OPA227UA

Texas Instruments

OPA227UA by Texas Instruments is a voltage-feedback operational amplifier with a max input offset voltage of 200 uV and a max average bias current of 0.01 uA. It is commonly used in industrial applications due to its low-offset, high common mode reject ratio, and wide temperature range.

LM8261M5

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;

LM2904D

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

OPA192IDGKR

Texas Instruments

OPA192IDGKR by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grade. Ideal for precision applications requiring high common mode rejection ratio and low bias current consumption.

LM2902D

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

OPA4227UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

POPA2210IDRGT

Texas Instruments

The Texas Instruments POPA2210IDRGT is a dual operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 35uV, nominal voltage of 15V, and unity gain bandwidth of 18MHz. Ideal for automotive applications due to its high common mode rejection ratio and small outline package design.

LM358N

Harris Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

INA2132UA

Burr-Brown Corporation

OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;

OPA2132UA/2K5

Texas Instruments

OPA2132UA/2K5 by Texas Instruments is a dual operational amplifier with 500uV max input offset voltage and 100dB nominal CMRR. Ideal for automotive applications, it operates at -40 to 125°C, has a unity gain bandwidth of 8MHz, and low bias current of 0.00005uA.

LM7321MF

Texas Instruments

LM7321MF by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 6000uV, Nominal Unity Gain Bandwidth of 16000kHz, and Nominal Voltage of 5V. It is used in automotive applications due to its small outline package style and wide operating temperature range from -40°C to 125°C.