Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LMR51420YDDCR

Manufacturer

Texas Instruments
Manufacturer's Part Number

LMR51420YDDCR
Description

SWITCHING REGULATOR; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Nominal Input Voltage: 12 V;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Tt Electronics Plc

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;

Details

BSS138

Siemens

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SS14

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SN6505BDBVR

Texas Instruments

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

Details

CRG0805F10R

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

LM555CM

Harris Semiconductor

Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LM358N

Philips Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

SMBJ18CA

Changzhou Galaxy Century Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Siemens

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Silicon Transistor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

1N4148

STMicroelectronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SS14

Onsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

FDV303N

Fairchild Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;

Details

SN65HVD230DR

Texas Instruments

SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.

Details

LMR51420YDDCR Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	CURRENT-MODE
Width (mm):	1.6 mm
Maximum Seated Height:	1.1 mm
Maximum Output Current:	2 A
Surface Mount:	YES
Terminal Finish:	TIN
No. of Outputs:	1
Switcher Config:	BUCK
No. of Terminals:	6
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE
JESD-30 Code:	R-PDSO-G6
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	150 Cel
Package Code:	TSOP
Minimum Output Voltage:	.6 V
Control Technique:	PULSE FREQUENCY MODULATION
Moisture Sensitivity Level (MSL):	1
Maximum Switching Frequency:	1100 kHz
Minimum Input Voltage:	4.5 V
Maximum Input Voltage:	36 V
Maximum Output Voltage:	34.2 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Package Equivalence Code:	TSOP6,.11,37
Nominal Input Voltage:	12 V
Other IC type:	SWITCHING REGULATOR
Length:	2.9 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.95 mm

Category Top Products

TPS560430YFDBVT

Texas Instruments

TPS560430YFDBVT by Texas Instruments is a switching regulator with a max output current of 0.6A and max output voltage of 24V, ideal for automotive applications. It operates b/w -40 to 125°C, with a control mode of current-mode PWM and a compact package style suitable for space-constrained designs.

TPS54620RHLR

Texas Instruments

TPS54620RHLR by Texas Instruments is a 14-terminal switching regulator with a max output current of 6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures, has a wide input voltage range from 4.5V to 17V, and is ideal for applications requiring high efficiency power conversion.

LM2596S-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;

LM2674MX-ADJ/NOPB

Texas Instruments

LM2674MX-ADJ/NOPB by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 40V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

TPS54331DRG4

Texas Instruments

TPS54331DRG4 by Texas Instruments is a switching regulator with 3A output current, 570kHz max frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to its small outline package and pulse width modulation control mode.

LM2574M-5.0

Texas Instruments

LM2574M-5.0 by Texas Instruments is a switching regulator with a max output current of 0.5A and a nominal output voltage of 5V, suitable for automotive applications. It operates b/w -40°C to 125°C, has a control mode of voltage-mode, and uses pulse width modulation as its control technique.

AP64501SP-13

Diodes Incorporated

AP64501SP-13 by Diodes Inc. is a switching regulator with max output voltage of 40V, min input voltage of 3.8V, and max operating temp of 85°C. Ideal for industrial applications requiring pulse frequency modulation control technique in a small outline package style.

TPS54361DPRT

Texas Instruments

TPS54361DPRT by Texas Instruments is a switching regulator with a max output current of 3.5A and max output voltage of 59V, ideal for industrial applications. Operating b/w -40 to 85°C, it features pulse width modulation control mode and a compact square package style suitable for surface mount assembly. With a wide input voltage range from 4.5V to 60V, this device offers efficient power conversion in various electronic systems.

LMZM23600V5SILT

Texas Instruments

LMZM23600V5SILT by Texas Instruments is a switching regulator with a max output current of 0.5A and a control technique of pulse width modulation. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring stable power supply solutions. With a compact rectangular package style and surface-mount design, this IC offers efficient buck-boost switching configurations for voltage regulation in tight spaces.

TPS61170QDRVRQ1

Texas Instruments

TPS61170QDRVRQ1 by Texas Instruments is a switching regulator with 1.44A output current, operating b/w -40 to 125°C. It features a buck-boost switcher config, PWM control mode, and supports input voltages from 3V to 18V. Ideal for automotive applications due to AEC-Q100 screening level and compact design with small outline package style.

LM2675M-12/NOPB

Texas Instruments

LM2675M-12/NOPB by Texas Instruments is a switching regulator with a max output current of 1A and a max output voltage of 37V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

TL494CDR2G

Onsemi

TL494CDR2G by Onsemi is a 16-terminal switching controller with a max output current of 0.5A and a control mode of voltage-mode PWM. It operates b/w temperatures of 0 to 70°C, making it suitable for various commercial applications requiring pulse width modulation control techniques at frequencies up to 200kHz.

TPS5410DR

Texas Instruments

TPS5410DR by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max input voltage of 36V. It operates in buck configuration with pulse width modulation control technique, suitable for automotive applications due to its temperature grade. The package style is small outline, making it ideal for space-constrained designs.

LM2575D2T-5R4G

Onsemi

LM2575D2T-5R4G by Onsemi is a 3.2A BUCK switching regulator with VOLTAGE-MODE control, operating from -40 to 125°C. Ideal for automotive applications, it accepts input voltages from 4.75V to 40V and provides a stable output of 3.3V at a max frequency of 63kHz.

LMR14010ADDCR

Texas Instruments

LMR14010ADDCR by Texas Instruments is a small outline, thin profile switching regulator with 6 terminals. It operates b/w -40 to 125°C, supporting input voltages from 4-40V and output currents up to 1A. Ideal for automotive applications due to its pulse width modulation control mode and buck switcher configuration at a max frequency of 700kHz.

TPS63001DRCRG4

Texas Instruments

TPS63001DRCRG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost configuration with a control mode of current-mode PWM. With a small outline package style, it offers a min output voltage of 3.3V.

LM5145RGYT

Texas Instruments

LM5145RGYT by Texas Instruments is a switching regulator with a max output voltage of 60V and max output current of 30A. Operating b/w -40 to 125°C, it uses pulse width modulation control technique for automotive applications. With a package style of chip carrier and heat sink/slug, this device supports a wide input voltage range from 6V to 75V.

TPS62130ARGTR

Texas Instruments

TPS62130ARGTR by Texas Instruments is a switching regulator with a max output current of 3A and a max switching frequency of 2500 kHz. It operates in industrial temperature grades, with a wide input voltage range from 3V to 17V, making it suitable for various power management applications. The chip carrier package style with very thin profile and no-lead terminal form enhances its versatility in compact designs.

TPS5401DGQR

Texas Instruments

TPS5401DGQR by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 39V, suitable for automotive applications. It operates in buck configuration with pulse width modulation control mode, offering a wide input voltage range from 3.5V to 42V and high switching frequency up to 2500kHz.

UC2825DWTRG4

Texas Instruments

UC2825DWTRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 2A and a max switching frequency of 1kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various power management applications requiring precise voltage regulation in compact designs. The IC features pulse width modulation control technique and push-pull switcher configuration, ideal for applications demanding efficient power conversion with minimal footprint.