Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

LM3481MMX/NOPB

Manufacturer

Texas Instruments
Manufacturer's Part Number

LM3481MMX/NOPB
Description

SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
Datasheet

Datasheet

Not In Stock

Popular Products

2N7002

Samsung

N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;

Details

OPA2277UA/2K5

Texas Instruments

OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.

Details

MBR1560CT

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;

Details

LM555CN

Intersil

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

SS14

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

International Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

MBRS130LT3G

Onsemi

MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.

Details

M39029/58-360

Amphenol

CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;

Details

M39029/56-351

Carlisle Interconnect Technologies

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;

Details

SMBJ18CA

Continental Device India

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

STMicroelectronics

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;

Details

1N4148

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

LM358N

Intersil

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N5819HW-7-F

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317LMX/NOPB

Texas Instruments

LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM3481MMX/NOPB Technical Details

TYPE	DESCRIPTION
Package Body Material:	PLASTIC/EPOXY
Control Mode:	CURRENT-MODE
Maximum Time At Peak Reflow Temperature (s):	30
Width (mm):	3 mm
Maximum Seated Height:	1.09 mm
Maximum Output Current:	1 A
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Outputs:	1
Switcher Config:	BUCK-BOOST
No. of Terminals:	10
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH
JESD-30 Code:	S-PDSO-G10
Package Shape:	SQUARE
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
Package Code:	TSSOP
Minimum Output Voltage:	1.26 V
Control Technique:	PULSE WIDTH MODULATION
Moisture Sensitivity Level (MSL):	1
Maximum Switching Frequency:	1000 kHz
Minimum Input Voltage:	2.97 V
Maximum Input Voltage:	48 V
Maximum Output Voltage:	500 V
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Nominal Input Voltage:	12 V
Other IC type:	SWITCHING CONTROLLER
Length:	3 mm
Peak Reflow Temperature (C):	260
Terminal Pitch:	.5 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

TPS63000DRCTG4

Texas Instruments

TPS63000DRCTG4 by Texas Instruments is a switching regulator with a max output current of 2A and max operating temp of 85°C. Ideal for industrial applications, it operates in buck-boost mode with a control technique of PWM, offering a wide input voltage range from 1.8V to 5.5V.

LM2594DADJR2G

Onsemi

LM2594DADJR2G by Onsemi is a voltage-mode switching regulator with 0.5A output current, operating b/w -40 to 125°C. It has a buck-boost switcher config, supporting input voltages from 4.5V to 40V and output voltages ranging from 1.23V to 37V. Ideal for automotive applications due to its small outline package style and high max operating temperature of 125°C.

LM25116MHX/NOPB

Texas Instruments

LM25116MHX/NOPB by Texas Instruments is a current-mode switching controller with a max output current of 20A and a max switching frequency of 1MHz. It operates in automotive-grade temperatures (-40 to 125°C) and is suitable for applications requiring high efficiency power conversion, such as automotive electronics and industrial automation systems.

IR1155STRPBF

Infineon Technologies

IR1155STRPBF by Infineon is a current-mode power factor controller with boost switcher config. Operating at 200 kHz, it has a nominal voltage of 15 V and max input voltage of 19 V. This small outline IC is ideal for switching regulators & controllers in applications requiring efficient power supplies.

LM5085MYE/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;

LM3481MM/NOPB

Texas Instruments

LM3481MM/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C, making it suitable for automotive applications. With a max output voltage of 500V and max output current of 1A, it is ideal for buck-boost configurations in various electronic devices.

MP9486AGN-Z

Monolithic Power Systems

MP9486AGN-Z by Monolithic Power Systems is a voltage-mode switching regulator with a 60V nominal input and output voltage, operating b/w -40 to 125°C. This small outline IC has a max switching frequency of 1MHz, making it suitable for automotive applications requiring efficient buck converter control.

LMR38020SDDAR

Texas Instruments

LMR38020SDDAR by Texas Instruments is a switching regulator with 2A output current, 1V min output voltage, and 2200kHz max switching frequency. Ideal for applications requiring efficient power conversion in a compact design, such as portable electronics or industrial automation systems.

LM2675MX-5.0

Texas Instruments

LM2675MX-5.0 by Texas Instruments is a switching regulator with 2.2A output current, 275kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its DMOS technology, it operates b/w -40°C to 125°C temperature range and supports input voltages from 6.5V to 40V.

LM2674M-ADJ

Texas Instruments

LM2674M-ADJ by Texas Instruments is a switching regulator with a max output current of 1.25 A and a max input voltage of 40 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.

LM2596SX-ADJ

Texas Instruments

LM2596SX-ADJ by Texas Instruments is a switching regulator with 5 terminals, offering a max output current of 3A and a wide input voltage range from 4.5V to 40V. Operating in voltage-mode control, it provides an adjustable output voltage ranging from 1.235V to 37V, making it suitable for automotive applications due to its high temperature grade of up to 125°C.

TPSM84209RKHT

Texas Instruments

TPSM84209RKHT by Texas Instruments is a switching regulator with 9 terminals, operating temperature range of -40 to 85°C, and output current up to 2.5A. Ideal for industrial applications requiring a compact chip carrier package with pulse width modulation control and buck-boost configuration.

LMZ12002TZ-ADJ/NOPB

Texas Instruments

LMZ12002TZ-ADJ/NOPB by Texas Instruments is a switching regulator with max output current of 2A, operating temp range -40 to 125°C, and max input voltage of 20V. Ideal for automotive applications due to its small size (10.16x9.85mm) and high switching frequency of 1000kHz, making it suitable for power management in vehicles.

LMZ10501SILT

Texas Instruments

LMZ10501SILT by Texas Instruments is a switching regulator with 1A output current, 3.6V max output voltage, and 2250kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design with small outline package style.

LM2678SX-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; No. of Terminals: 7; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Position: SINGLE;

LM5008MM

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;

LM2576HVT-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Shape: RECTANGULAR; Surface Mount: NO; Qualification: Not Qualified;

LMR16006YDDCT

Texas Instruments

LMR16006YDDCT by Texas Instruments is a switching regulator with max output voltage of 55V, current-mode control, and max output current of 0.6A. Ideal for automotive applications due to its compact size (2.9mm x 1.6mm) and wide operating temperature range (-40°C to 125°C).

UCC28089DR

Texas Instruments

UCC28089DR by Texas Instruments is a switching controller with a max output current of 1A and a max switching frequency of 1000kHz. It operates in industrial temperature grade range from -40 to 105°C, making it suitable for various power management applications. The IC features pulse width modulation control technique and push-pull switcher configuration for efficient power conversion.

LM51561HQPWPRQ1

Texas Instruments

LM51561HQPWPRQ1 by Texas Instruments is a switching controller with a 12V nominal input voltage and 300V max output voltage. Operating in automotive-grade temperatures, it features a current-mode control technique and pulse width modulation for buck-boost configuration. With AEC-Q100 screening, this IC is ideal for automotive applications requiring high efficiency and compact design.