Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

INA217AIP

Manufacturer

Texas Instruments
Manufacturer's Part Number

INA217AIP
Description

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

SS495ASP

Micro Switch

The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.

Details

FDV304P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;

Details

2N2222A

NXP Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;

Details

2N7002

Sinyork

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

Infineon Technologies

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

CRCW04020000Z0ED

Vishay Intertechnology

Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

M24308/2-1F

Amphenol

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;

Details

M39029/56-351

Defense Logistics Agency

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;

Details

BSS123LT1G

Onsemi

BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.

Details

1N4148WS

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

NXP Semiconductors

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

DS18B20Z

Maxim Integrated

DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.

Details

2N2222A

Continental Device India

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;

Details

U.FL-R-SMT-1(10)

Hirose Electric

U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.

Details

MBR130T1G

Onsemi

MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.

Details

LM358M

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

INA217AIP Technical Details

TYPE	DESCRIPTION
Package Body Material:	Plastic/Epoxy
Maximum Seated Height:	0.2 in (5.08 mm)
Nominal Bandwidth (3dB):	3.4 MHz
Maximum Supply Voltage Limit:	18 V
Maximum Bias Current (IIB) @25C:	12 uA
Sub-Category:	Instrumentation Amplifiers
Maximum Supply Current:	12 mA
Surface Mount:	No
Terminal Finish:	Nickel Palladium Gold
No. of Terminals:	8
Maximum Input Offset Voltage:	750 µV
Terminal Position:	Dual
Package Style (Meter):	In-Line
Technology:	Bipolar
JESD-30 Code:	R-PDIP-T8
Minimum Voltage Gain:	1
Package Shape:	Rectangular
Terminal Form:	Through-Hole
Maximum Operating Temperature:	85 °C (185 °F)
Package Code:	DIP
Amplifier Type:	Instrumentation Amplifier
Nominal Slow Rate:	15 V/us
Width:	0.3 in (7.62 mm)
Maximum Voltage Gain:	1000
Maximum Non Linearity:	0.0006 %
Nominal Voltage Gain:	10
Packing Method:	Tube
Nominal Negative Supply Voltage (Vsup):	-15 V
JESD-609 Code:	e4
Minimum Operating Temperature:	-40 °C (-40 °F)
Maximum Average Bias Current (IIB):	12 uA
No. of Functions:	1
Qualification:	No
Minimum Common Mode Reject Ratio:	70 dB
Package Equivalence Code:	DIP8,.3
Length:	0.386 in (9.81 mm)
Nominal Supply Voltage / Vsup (V):	15 V
Maximum Negative Supply Voltage Limit:	-18 V
Terminal Pitch:	0.1 in (2.54 mm)
Maximum Input Offset Current (IIO):	1 uA
Temperature Grade:	Industrial
Power Supplies (V):	±15 V

Category Top Products

LT1167CS8#PBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

AD623ANZ

Analog Devices

AD623ANZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 350 uV, max average bias current of 0.0275 uA, and a nominal bandwidth of 0.8 MHz. It is commonly used in industrial applications requiring precise amplification and signal conditioning.

AD8422ARZ

Analog Devices

AD8422ARZ by Analog Devices is an instrumentation amplifier with a max input offset voltage of 70uV and max average bias current of 0.002uA. It operates at a nominal voltage of 15V, making it suitable for industrial applications requiring precise signal amplification in a compact package.

LT6370HS8E#PBF

Analog Devices

OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

XTR103BU

Burr-Brown Corporation

INSTRUMENTATION AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Shape: RECTANGULAR; Qualification: Not Qualified;

INA2322EA/2K5

Texas Instruments

INA2322EA/2K5 by Texas Instruments is a CMOS instrumentation amplifier with 14 terminals. It has a max input offset voltage of 11000 uV and a nominal voltage of 5V, making it suitable for military applications requiring precise signal amplification in small spaces. With a max non-linearity of 0.015% and a bandwidth of 0.5 MHz, this amplifier offers high performance in harsh environments.

INA122UA

Texas Instruments

INA122UA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 250uV and max bias current of -0.05uA. It operates at a nominal voltage of 15V, offers a min voltage gain of 5, and has a bandwidth of 0.12MHz. Ideal for industrial applications requiring precise signal amplification in compact spaces.

XTR105P

Texas Instruments

XTR105P by Texas Instruments is an instrumentation amplifier with 25uV max input offset voltage, 0.025uA max average bias current, and 0.003uA max input offset current. Ideal for industrial applications requiring precise signal amplification in a compact package.

RCV420KPG4

Texas Instruments

The Texas Instruments RCV420KPG4 is an instrumentation amplifier with 16 terminals and a nominal voltage of ±15V. It offers a max non-linearity of 0.002% and a common mode reject ratio of 70dB, making it ideal for precision measurement applications requiring high accuracy and low noise levels. With a temperature grade of commercial, this amplifier operates b/w 0-70°C, providing reliable performance in various environmental conditions.

AD8421ACPZ-R7

Analog Devices

INSTRUMENTATION AMPLIFIER;

LT1789CS8-1#TRPBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

INA121UA

Texas Instruments

INA121UA by Texas Instruments is an instrumentation amplifier with a max input offset voltage of 500uV, ideal for industrial applications. It offers a max supply current of 0.53mA and a nominal bandwidth of 0.6MHz, making it suitable for precise signal amplification in harsh environments. With a compact rectangular package style and surface mount capability, it provides high performance in a small footprint.

AD8226ARMZ-R7

Analog Devices

AD8226ARMZ-R7 by Analog Devices is an instrumentation amplifier with 100uV max input offset voltage, 1.5MHz bandwidth, and 80dB min CMRR. Ideal for automotive applications due to its -40 to 125 °C operating temp range and small outline package style.

AD8253ARMZ-R7

Analog Devices

AD8253ARMZ-R7 by Analog Devices is a CMOS instrumentation amplifier with a max supply voltage of ±17V. It has a nominal bandwidth of 10MHz and can operate in industrial temperature range (-40°C to 85°C). This amplifier is commonly used in instrumentation and measurement applications.

AD594CD

Analog Devices

AD594CD by Analog Devices is an instrumentation amplifier with a max supply voltage of 36V and bandwidth of 0.015MHz. Ideal for military applications, it operates b/w -55 to 125 °C, consuming only 0.3mA at a nominal voltage of 5V.

LTC2053HMS8#TRPBF

Linear Technology

INSTRUMENTATION AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;

LT1789IS8-1#PBF

Analog Devices

LT1789IS8-1#PBF by Analog Devices is an instrumentation amplifier with a max input offset voltage of 100uV and max average bias current of 0.04uA. It operates in industrial temperatures from -40 to 85 °C and has a nominal bandwidth of 0.06 MHz. Ideal for precision measurement applications requiring high gain and low noise.

INA333SKGD2

Texas Instruments

INA333SKGD2 by Texas Instruments is an instrumentation amplifier with 25uV max input offset voltage, 0.002044uA max average bias current, and 1000 max voltage gain. Ideal for military applications due to its -55 to 210 °C operating temperature range and 80dB min common mode reject ratio.

PGA204AU/1K

Texas Instruments

PGA204AU/1K by Texas Instruments is an instrumentation amplifier with 175uV max input offset voltage, 1MHz nominal bandwidth, and 1000 max voltage gain. Ideal for industrial applications requiring precise signal amplification in a compact package with -40 to 85°C operating temperature range.

AD526ADZ

Analog Devices

AD526ADZ by Analog Devices is an instrumentation amplifier with max input offset voltage of 700uV, max average bias current of 0.00015uA, and max non-linearity of 0.001%. Ideal for industrial applications requiring precise signal amplification in a temperature range from -40 to 85°C.