Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

All prices are in USD

Bulk

QTY	Unit Price	Ext Price
964	$0.125	$120.886

DRV5021A2EDBZRQ1

Manufacturer

Texas Instruments
Manufacturer's Part Number

DRV5021A2EDBZRQ1
Description

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA; Minimum Supply Voltage: 2.5 V;
Datasheet

Datasheet

964 In Stock

Popular Products

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

FT232RL-TUBE

FTDI

FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.

Details

SMBJ18CA

Lite-on Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Itt Components

RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;

Details

BAV99

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

EU2B-YS3203F

Idec

ROTARY SWITCH;

Details

M24308/2-1F

Souriau-sunbank Connection Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;

Details

LM358M

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BAV99

Nexperia

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Excel (Suzhou) Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

NXP Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317T

Onsemi

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

DRV5021A2EDBZRQ1 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	2.5 V
Minimum Range Of Magnetic Field:	2.7 mT
Package Body Material:	PLASTIC/EPOXY
Maximum Operating Current:	2.8 mA
Output Range:	0-20mA
Output Type:	DIGITAL CURRENT
Maximum Output Current:	20 A
Terminal Finish:	Matte Tin (Sn)
Termination Type:	SOLDER
Screening Level:	AEC-Q100
Input Mode:	UNIPOLAR
Output Interface Type:	2-WIRE INTERFACE
Maximum Operating Temperature:	150 Cel
Hysteresis:	2.2 mT
Other Names:	296-DRV5021A2EDBZRQ1DKR 296-DRV5021A2EDBZRQ1CT 296-DRV5021A2EDBZRQ1TR
Maximum Supply Voltage:	5.5 V
Housing:	PLASTIC
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Resistance:	8 ohm
Body Width:	1.3 inch
Sensors or Transducers Type:	MAGNETIC FIELD SENSOR,HALL EFFECT
Maximum Magnetic Field Range:	14 mT
Package Shape or Style:	RECTANGULAR
Output (V):	OPEN-DRAIN
Body Height:	1.12 mm
Additional Features:	AEC-Q100; IT HAVE SENSITIVITY OF 9.2 MT
Body Length/Diameter:	2.92 mm

Category Top Products

A1102ELHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1102ELHLT-T is a magnetic field sensor with 24V max supply voltage, -40 to 85°C operating temp range, and 5.5mT hysteresis. Ideal for automotive applications due to AEC-Q100 screening level, BICMOS technology, and compact rectangular package design.

SS94A1

Micro Switch

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 1mA; Body Width: 1.8 inch;

A1319LLHLT-5-T

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: MATTE TIN; JESD-609 Code: e3;

SS49

Honeywell Sensing And Control

SS49 by Honeywell is a magnetic field sensor with single-ended output, operating at -40 to 100°C. It offers sensitivity of 1.25 mV/G and output range of 1.75-2.25V, suitable for applications requiring precise analog voltage measurements in a compact rectangular package with through-hole mounting.

DRV5023BIQLPGMQ1

Texas Instruments

DRV5023BIQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 8.5 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. It is ideal for automotive applications requiring precise digital current output in a compact rectangular package.

A1212LLHLT-T

Allegro MicroSystems

Allegro MicroSystems' A1212LLHLT-T is a magnetic field sensor with 24V supply, 22.5mT hysteresis, and 400mV analog voltage output. Ideal for detecting magnetic fields in applications requiring precise non-inverting polarity sensing.

DRV5053PAQLPG

Texas Instruments

DRV5053PAQLPG by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and operating temperature from -40°C to 125°C. It offers a voltage output range of 0-2V, max output current of 2.3A, and features Hall effect technology. Ideal for applications requiring precise magnetic field sensing in various industries.

S-5712ACDH1-I4T1U

Ablic

Ablic's S-5712ACDH1-I4T1U is a magnetic field sensor with 3.5V max supply, 0.8 mT hysteresis, and 0.40-1.45V output range. Ideal for applications requiring precise voltage output in a compact rectangular package, such as automotive sensors or industrial automation systems.

SS495A-SP

Honeywell Sensing And Control

SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.

55140-3H-03-A

Hamlin Electronics Europe

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 20mA; Maximum Supply Voltage: 24 V;

VF460S

Honeywell

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Termination Type: SOLDER; Body Length/Diameter: 4 mm;

OHS3020U

Tt Electronics Plc

OHS3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA, suitable for applications requiring precise current output control. With a compact rectangular package shape and through-hole mounting feature, it is ideal for industrial automation systems.

HAL504SF-A

Micronas Semiconductor Holding Ag

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0-20mA;

A1220LUA-T

Allegro MicroSystems

Allegro MicroSystems' A1220LUA-T is a magnetic field sensor with 3-24V power supply, 4.5mT hysteresis, and 30-60mA analog current output. Ideal for applications requiring precise magnetic field detection in temperatures ranging from -40 to 150°C.

A31010SEHALT-10

Allegro MicroSystems

MAGNETIC FIELD SENSOR,HALL EFFECT;

ACS717KMATR-10B-T

Allegro MicroSystems

Allegro MicroSystems' ACS717KMATR-10B-T is a magnetic field sensor with 3-3.6V supply, -40 to 125°C temp range, and 7.5mA max current. Ideal for voltage output applications in automotive and industrial sectors due to its Hall effect technology and surface mounting feature.

S-5716ANSL3-M3T1U

Ablic

MAGNETIC FIELD SENSOR,HALL EFFECT; Terminal Finish: TIN; JESD-609 Code: e3;

HAL508SF-K

TDK

HAL508SF-K by TDK is a magnetic field sensor with 24V max supply voltage, 2mT hysteresis, and 0-20mA analog current output. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small body dimensions of 4.55mm x 2.55 inch x 1.21 mm and surface mounting feature.

DRV5013ADQDBZR

Texas Instruments

DRV5013ADQDBZR by Texas Instruments is a magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 5.4mT. It operates in temperatures from -40°C to 125°C, making it suitable for various applications requiring precise digital voltage output based on magnetic field strength measurements. The sensor's compact rectangular package with surface mount feature and solder termination type enhances its versatility in different electronic systems.

SS496A1-SP

Honeywell Sensing And Control

SS496A1-SP by Honeywell is a magnetic field sensor with 3-inch body width and 1.57mm height. It operates b/w -40 to 150°C, with sensitivity of 2.5 mV/G and output current type as analog. Ideal for applications requiring precise magnetic field detection in compact spaces.