Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

M83519/2-4

Manufacturer

TE Connectivity
Manufacturer's Part Number

M83519/2-4
Description

HEAT SHRINK SOLDER SLEEVE; Jacket Material: CROSSLINKED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS138

Good-ark Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;

Details

SMBJ18CA

Concord Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

ABS07-32.768KHZ-T

Abracon

Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.

Details

SMBJ18CA

Db Lectro

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

MICRODIODE ELECTRONICS SHENZHEN CO LTD

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138

Weitron Technology

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

LM78L05ACMX/NOPB

Texas Instruments

LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.

Details

1N4148

North American Philips Discrete Products Div

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);

Details

SMBJ18CA

Thinking Electronic Industrial

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Semiconductors

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;

Details

2N7002

Bytesonic Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;

Details

LM358D-T

NXP Semiconductors

LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.

Details

ULN2803A

Motorola

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;

Details

1N4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

USB2514BI-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Gec Plessey Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M83519/2-4 Technical Details

TYPE	DESCRIPTION
Construction:	SINGLE WALL
Jacket Material:	CROSSLINKED POLYVINYLIDENE FLUORIDE
Connector Accessory Type:	HEAT SHRINK SOLDER SLEEVE

Category Top Products

NTFR-3/4-0-SP

TE Connectivity

HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Construction: SINGLE WALL; Minimum Operating Temperature: -70 Cel; Maximum Operating Temperature: 121 Cel; Wire Gauge (AWG): 0;

204W201-25/225-0

TE Connectivity

HEAT SHRINK BOOT; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG; Jacket Material: ELASTOMER; Minimum Operating Temperature: -75 Cel;

M23053/5-103-0

Grayline

HEAT SHRINK TUBE; Assembly Item Name: TAPER SLEEVE; MIL Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO;

RNF-100-1/4-X-STK

TE Connectivity

HEAT SHRINK TUBE; Minimum Operating Temperature: -55 Cel; Jacket Material: POLYOLEFIN; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 135 Cel; Construction: SINGLE WALL;

202F211-50-0

TE Connectivity

TE Connectivity's 202F211-50-0 heat shrink features ELASTOMER jacket material, 0.26" min cable entry, and 150°C max operating temp. Ideal for -55°C to 0.614" cable entry applications with 0 AWG wire size requirements.

SO96-3-55-22-90-100

TE Connectivity

TE Connectivity's SO96-3-55-22-90-100 heat shrink features single wall construction with Polyvinylidene Fluoride jacket material. It has a max operating temperature of 175°C, diameter of 4.3mm, and supports up to 0 AWG wire size. Ideal for solder terminals in various electrical applications.

202D274-4-22-0

TE Connectivity

HEAT SHRINK BOOT; Minimum Operating Temperature: -55 Cel; Jacket Material: POLYOLEFIN; Material: POLYOLEFIN; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 135 Cel;

202F211-71/180-0

TE Connectivity

HEAT SHRINK BOOT; Maximum Operating Temperature: 135 Cel; Maximum Wire Size: 0 AWG; Jacket Material: SEMI-RIGID POLYOLEFIN; Minimum Operating Temperature: -55 Cel; Material: POLYOLEFIN;

HSTT100-C

Panduit

HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN; Construction: SINGLE WALL;

TMS-SCE-1K-3/4-2.0-9

TE Connectivity

HEAT SHRINK MARKER SLEEVE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Jacket Material: POLYOLEFIN; Minimum Operating Temperature: -55 Cel; Construction: SINGLE WALL;

202K132-25-01/225-CS-1858

TE Connectivity

HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Jacket Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Material: ELASTOMER;

382A012-4/86-0

TE Connectivity

TE Connectivity's 382A012-4/86-0 heat shrink features dual wall construction with polyolefin jacket material. It has a max operating temp of 135°C and min of -55°C, suitable for wire sizes up to 0 AWG. Ideal for various applications requiring reliable insulation and protection.

M23053/4-301-0

TE Connectivity

HEAT SHRINK TUBE; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Construction: DUAL WALL;

HT-SCE-1K-1/8-2.0-9

TE Connectivity

HEAT SHRINK MARKER SLEEVE; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 225 Cel;

222K121-25-00-0

TE Connectivity

TE Connectivity's 222K121-25-00-0 heat shrink features ELASTOMER jacket material, 0.41" min cable entry, and -75 to 150°C operating temp range. Ideal for applications requiring protection and insulation for cables up to 0 AWG with 0.94" max cable entry.

M23053/5-106-9

Defense Logistics Agency

HEAT SHRINK TUBE; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;

NB11802001

TE Connectivity

HEAT SHRINK TUBE; Maximum Operating Temperature: 110 Cel; Jacket Material: POLYOLEFIN; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel;

202K121-25-G38/225-0

TE Connectivity

HEAT SHRINK BOOT; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Jacket Material: ELASTOMER; Material: ELASTOMER; Maximum Operating Temperature: 150 Cel;

222K174-25/225-0

TE Connectivity

TE Connectivity's 222K174-25/225-0 heat shrink features dual wall construction with elastomer jacket material. It has a min cable entry of 0.618" and can withstand temperatures from -75°C to 150°C. Ideal for applications requiring protection and insulation for cables up to 0 AWG size with a max cable entry of 1.378".

CWT-9-W122-5

TE Connectivity

TE Connectivity's CWT-9-W122-5 heat shrink features single wall construction with crosslinked modified polyolefin jacket material. It has a max operating temperature of 125°C, suitable for 16 AWG wire gauge applications. With a diameter of 1.5mm, it is ideal for protecting and insulating wires in various electronic and electrical systems.