Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

DTP06-2S-C017

Manufacturer

TE Connectivity
Manufacturer's Part Number

DTP06-2S-C017
Description

CONNECTOR ACCESSORY; Rated Voltage: 200 V; Rated Current: 25 A; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE;
Datasheet

Datasheet

Not In Stock

Popular Products

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

1554216002

Molex

WIRE AND CABLE;

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

LL4148

Sinyork

RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

Kec

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002

Nte Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;

Details

1N4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Changzhou Starsea Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

FDC5614P

MSKSEMI SEMICONDUCTOR

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;

Details

BAV99

Toshiba

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

USBLC6-2SC6

STMicroelectronics

USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.

Details

BSS138

Infineon Technologies

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;

Details

1N4148WS

Meritek Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358N

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Toshiba

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM2931AZ-5.0RAG

Onsemi

LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.

Details

BSS138LT3G

Onsemi

BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.

Details

261

Mercury Systems

Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;

Details

DTP06-2S-C017 Technical Details

TYPE	DESCRIPTION
Design:	POWER AND SIGNAL
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	125 Cel
Rated Current:	25 A
Rated DC Voltage:	200 V
Minimum Operating Temperature:	-55 Cel
Rated Voltage:	200 V

Category Top Products

12089040

Delphi Connection Systems

CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;

248-501

Wago

TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKING ITEM;

WM-12P

TE Connectivity

The TE Connectivity WM-12P is an assembly product designed for DTM SERIES applications. It features a max operating temperature of 125°C and a min operating temperature of -55°C. With a design for power and signal, it supports wire sizes up to 0 AWG using polybutylene terephthalate material.

13711542

Delphi Connection Systems

CONNECTOR ACCESSORY; Cable Types: FLRY-B; Material: COPPER ALLOY; Maximum Cable Entry: .063 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .0472 inch;

33000-1003

Molex

Molex 33000-1003 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can handle up to 10A current at 500V DC. With operating temperatures from -40°C to 105°C, it accommodates wire sizes up to 22 AWG in straight mounting applications.

08-50-0032

Molex

Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.

A114017

Amphenol

CONNECTOR ACCESSORY; Manufacturer Series: A114017;

1718250100

Molex

CONNECTOR ACCESSORY;

HDC34-24

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;

7-1452665-1

TE Connectivity

TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.

FSD77-8-DSL2

Panduit

TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: YES; Assembly Item Name: FERRULE; Approvals (V): CSA; Maximum Cable Entry: .12 inch;

936010822

Molex

CONNECTOR ACCESSORY;

030-2409-003

Itt Cannon

ITT Cannon 030-2409-003 is a crimp terminal contact with copper alloy material. It supports wire sizes from 22 AWG to 20 AWG, rated for 5A current. Ideal for flat cable applications requiring female signal contacts with blade pin-socket design.

AWM-6S

Amphenol

CONNECTOR ACCESSORY;

RM16M23K

Souriau

CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 16; Contact Resistance: 3 mohm; Contact Style: ROUND PIN-SOCKET; Maximum Wire Size: 16 AWG;

3231

Heyco Products

CONNECTOR ACCESSORY; Material: NYLON66; Assembly Item Name: CORDGRIP; Maximum Cable Entry: .45 inch; Maximum Operating Temperature: 115 Cel; Minimum Cable Entry: .17 inch;

0800886

Phoenix Contact

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;

DF1B-2022SCF

Hirose Electric

The Hirose Electric DF1B-2022SCF is a CRIMP terminal CONTACT with FEMALE gender and SQ PIN-SKT style. Made of BRASS, it is used in STRAIGHT mounting applications. Ideal for assembly products requiring reliable electrical connections.

39-00-0038

Molex

Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.

RJFTVC2G

Amphenol

CONNECTOR ACCESSORY; Approvals (V): UL; Maximum Operating Temperature: 85 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;