Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

ATUM-9/3-0-STK

Manufacturer

TE Connectivity
Manufacturer's Part Number

ATUM-9/3-0-STK
Description

HEAT SHRINK TUBE; Construction: SINGLE WALL; Jacket Material: POLYOLEFIN;
Datasheet

Datasheet

Not In Stock

Popular Products

DP83848IVVX/NOPB

Texas Instruments

Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.

Details

LL4148

Rfe International

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MURS160T3G

Onsemi

MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.

Details

KSZ9031RNXIA

Microchip Technology

KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.

Details

SS14

Vishay Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Protek Devices

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

350766-1

TE Connectivity

TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.

Details

LM317T

Linear Technology

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

2N7002

Supertex

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;

Details

2N7002

Zetex Plc

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;

Details

BAV99

Micro Commercial Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

Fairchild Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

LD1117S33CTR

STMicroelectronics

STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.

Details

BAV99

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAV99

National Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Secos

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ATUM-9/3-0-STK Technical Details

TYPE	DESCRIPTION
Construction:	SINGLE WALL
Jacket Material:	POLYOLEFIN
Connector Accessory Type:	HEAT SHRINK TUBE

Category Top Products

ZHTM-40/20-0-SP

TE Connectivity

HEAT SHRINK TUBE; Minimum Operating Temperature: -30 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG; Construction: DUAL WALL;

202K132-25-G03/225-0

TE Connectivity

HEAT SHRINK BOOT; Jacket Material: ELASTOMER; Maximum Operating Temperature: 150 Cel; Material: ELASTOMER; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -75 Cel;

RW-175-1/16-X-STK

TE Connectivity

HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Construction: SINGLE WALL; Jacket Material: CROSSLINKED FLUOROPOLYMER; Minimum Operating Temperature: -55 Cel;

M83519/2-13

Defense Logistics Agency

HEAT SHRINK TUBE; Jacket Material: POLYVIMYLIDENE FLUORIDE;

202K132-100-01-0

TE Connectivity

HEAT SHRINK BOOT; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -30 Cel; Maximum Cable Entry: 15 inch; Minimum Cable Entry: 5.9 inch;

FIT-221-1/16CL017

Alpha Wire

HEAT SHRINK TUBE; Jacket Material: CROSSLINKED POLYOLEFIN;

D-1744-01-LF

TE Connectivity

HEAT SHRINK SOLDER SLEEVE; Minimum Operating Temperature: -55 Cel; Jacket Material: CROSSLINKED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel;

S03-03-RCS1155

TE Connectivity

HEAT SHRINK SOLDER SLEEVE; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 150 Cel;

SCL-1/8-0-STK

TE Connectivity

HEAT SHRINK TUBE; Maximum Wire Size: 0 AWG; Construction: DUAL WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel;

ES2000-NO.2-B9-0-STK

TE Connectivity

HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Construction: DUAL WALL; Maximum Wire Size: 0 AWG;

S02-08-R-91

TE Connectivity

HEAT SHRINK SOLDER SLEEVE; Construction: SINGLE WALL; Diameter: 4.3 mm; Terminal Type: SOLDER; Maximum Wire Size: 0 AWG;

222K142-25-0

TE Connectivity

TE Connectivity's 222K142-25-0 heat shrink features single wall construction with elastomer jacket material. It has a min cable entry of 7.1" and can withstand temperatures from -75°C to 150°C. Ideal for applications requiring protection and insulation for wires up to 0 AWG size with a max cable entry of 17".

FIT-221-1/4RD020

Alpha Wire

HEAT SHRINK TUBE; Jacket Material: POLYOLEFIN;

222K163-25-0

TE Connectivity

TE Connectivity's 222K163-25-0 heat shrink features single wall construction with elastomer jacket material. It has a min cable entry of 9.9" and can withstand temperatures from -75°C to 150°C. Ideal for applications requiring protection and insulation for cables up to 0 AWG size with a max cable entry of 23".

B-040-24-N

TE Connectivity

HEAT SHRINK SOLDER SLEEVE; Wire Gauge (AWG): 0; Jacket Material: CROSSLINKED MODIFIED POLYVINYLIDENE FLUORIDE; Construction: SINGLE WALL; Terminal Type: SOLDER; Maximum Wire Size: 0 AWG;

202K142-25-01/225-0

TE Connectivity

TE Connectivity's 202K142-25-01/225-0 heat shrink features dual wall construction with elastomer jacket material. It has a min cable entry of 7.1" and can withstand temperatures from -75°C to 150°C. Ideal for applications requiring protection and insulation for cables up to 0 AWG in size, with a max cable entry of 17".

222D232-3-0

TE Connectivity

HEAT SHRINK BOOT; Material: POLYOLEFIN; Maximum Operating Temperature: 135 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Jacket Material: SEMI-RIGID POLYOLEFIN;

RMW-63/19-1200/ADH-0

TE Connectivity

HEAT SHRINK TUBE; Construction: DUAL WALL; Jacket Material: IRRADIATED MODIFIED POLYOLEFIN; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Maximum Operating Temperature: 110 Cel;

DR-25-1-1/2-0-SP

TE Connectivity

HEAT SHRINK TUBE; Wire Gauge (AWG): 0; Maximum Operating Temperature: 150 Cel; Construction: SINGLE WALL; Jacket Material: CROSSLINKED ELASTOMER; Maximum Wire Size: 0 AWG;

202A153-12-0

TE Connectivity

TE Connectivity's 202A153-12-0 heat shrink features FLUORO-ELASTOMER jacket material, with a min cable entry of 0.339" and max operating temperature of 200°C. Ideal for applications requiring high temperature resistance, it accommodates wire sizes up to 0 AWG and cable entries up to 1.031".