Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

517

Manufacturer

TE Connectivity
Manufacturer's Part Number

517
Description

MODULAR TERMINAL BLOCK; Additional Features: PHENOLIC; Wire Gauge: 12 AWG; Voltage (Rated): 300 V; Current (Rated): 20 A; Manufacturer Series: 517;
Datasheet

Datasheet

Not In Stock

Popular Products

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

1N4148

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

SS14

Jinan Jingheng Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N5819HW-7-F

Diodes Incorporated

1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.

Details

LFXTAL025159REEL

Iqd Frequency Products

LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.

Details

2N7002,215

NXP Semiconductors

2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.

Details

BAV99

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ULN2803A

Onsemi

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;

Details

BSS138

Sipex

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;

Details

1N4148WS

Vishay Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Surge Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

Details

1N4148WS

General Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Electronic Devices

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS84-7-F

SPC TECHNOLOGY/ MULTICOMP

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;

Details

SS14

SPC TECHNOLOGY/ MULTICOMP

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

SS14

Rugao Dachang Electronic

RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;

Details

2N2222A

Loras Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

M39029/58-360

Fct Electronic

CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;

Details

517 Technical Details

TYPE	DESCRIPTION
Product Type:	Modular Terminal Block
Additional Features:	Phenolic
Product Series:	517
Rated Current:	20 A
Wire Gauge:	12 AWG
Rated Voltage:	300 V

Category Top Products

3013

Ntt

LUG TERMINAL; Additional Features: MATERIAL: STEEL; FINISH: TIN;

M81824/1-3

Tri-star Electronics International

WIRE TERMINAL; Wire Gauge: 12 AWG; Manufacturer Series: M81824/1;

MS25036-156

Defense Logistics Agency

RING TERMINAL; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 6 mm2; No. of Ways: 1;

DNF18-250FIB-M

Panduit

PUSH-ON TERMINAL; Wire Gauge: 18 AWG; Terminal Gender: FEMALE; Wire Cross Section: 1.5 mm2;

MSTBVA2,5/6-G-5,08

Phoenix Contact

Phoenix Contact's MSTBVA2,5/6-G-5,08 is a 1-row strip terminal block with 6 ways and rated for 12A current at 320V. It accepts wire gauge up to 13 AWG with wire cross section of 2.5mm², suitable for board mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.

MS25036-112

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;

5-796634-2

TE Connectivity

TE Connectivity 5-796634-2 is a STRIP TERMINAL BLOCK with 2 ways, UL approved for 12 AWG wire. Mount on CABLE using SCREW fastening. Ideal for industrial and electrical applications.

MS25036-115

Fci

RING TERMINAL; Wire Gauge: 8 AWG; Terminal Gender: FEMALE;

2005-7645

Wago

MODULAR TERMINAL BLOCK;

1SNK710151R0000

Abb

MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 6 AWG; Wire Cross Section: 10 mm2; No. of Decks: 1; Safety Approval: UL;

1082

Trelec

LUG TERMINAL;

1-962915-2

Tyco Electronics Amp

TAB TERMINAL; Wire Gauge: 17 AWG; Wire Cross Section: 1 mm2; Terminal Gender: MALE; Current (Rated): 30 A; Safety Approval: LV, UL;

1733457

Phoenix Contact

Phoenix Contact 1733457 is a UL-approved barrier strip terminal block for BOARD mounting. It supports wire gauge up to 14 AWG with rated voltage of 250V and current of 17.5A. Ideal for applications requiring secure connections in industrial control systems.

807

Keystone Electronics

WIRE TERMINAL;

734-263

Wago

The Wago 734-263 is a Strip Terminal Block with 3 ways, rated for 300V and 10A. It is mounted on a board using connectors and holds safety approvals from CB, CSA, DNVGL, EN, IEC, and KEMA. Ideal for various applications requiring secure electrical connections in industrial settings.

MS25036-108

TE Connectivity

RING TERMINAL; Additional Features: MATERIAL: POLYAMIDE; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2.08 mm2; Safety Approval: CSA; MIL; UL;

MS25036-116

Defense Logistics Agency

LUG TERMINAL; Wire Gauge: 8 AWG;

1-320551-2

TE Connectivity

TE Connectivity's 1-320551-2 is a UL-approved RING TERMINAL for 22 AWG wire, rated at 300V. With 0.38 mm2 wire cross section, it is ideal for FEMALE terminals in various applications.

1786837

Phoenix Contact

Phoenix Contact 1786837 is a 2-row BARRIER STRIP TERMINAL BLOCK with 4 ways and rated for 8A current at 160V voltage. It has CB, CUL, UL, VDE safety approvals and accepts wire gauge up to 15 AWG. Ideal for board mounting applications requiring a fastening method via connector with wire cross section of 1.5 mm2.

2-3.7

J S T Mfg

RING TERMINAL; Wire Gauge: 14 AWG; Wire Cross Section: 2.63 mm2;