Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

5-963715-1

Manufacturer

TE Connectivity
Manufacturer's Part Number

5-963715-1
Description

CONNECTOR ACCESSORY; Rated Current: 7.5 A; Minimum Cable Entry: .051 inch; Wire Gauge (AWG): 18; Contact Design: STAMPED; Terminal Type: CRIMP;
Datasheet

Datasheet

Not In Stock

Popular Products

BSS123NH6327XTSA1

Infineon Technologies

Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.

Details

LM358N

STMicroelectronics

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

New England Semiconductor

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

LM317T

Micro Commercial Components

ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;

Details

LM7805CT

Fairchild Semiconductor

FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H

Raytheon Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

MMBF170LT1G

Rochester Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;

Details

MBR1560CT

General Instrument

MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

1N4148WT

Surge Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRCW06031K00FKEAHP

Vishay Intertechnology

Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.

Details

M24308/2-1F

Adi Electronics

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;

Details

BAV99

Allegro MicroSystems

RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Shenzhen Yixinsemi Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BAT54C-7-F

Diodes Incorporated

BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.

Details

STM32H753IIK6

STMicroelectronics

STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.

Details

LL4148

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

5-963715-1 Technical Details

TYPE	DESCRIPTION
Other Names:	17-5-963715-1DKR-ND -5-963715-1-CSI 17-5-963715-1TR 17-5-963715-1DKR -5-963715-1-LSI 17-5-963715-1CT
Wire Gauge (AWG):	18
Maximum Wire Size:	18 AWG
Minimum Cable Entry:	.051 inch
Contact Design:	STAMPED
Terminal Type:	CRIMP
Minimum Operating Temperature:	-40 Cel
Cross Section Area:	.75 mm2
Minimum Wire Size:	20 AWG
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Maximum Operating Temperature:	120 Cel
Rated Current:	7.5 A
Maximum Cable Entry:	.074 inch

Category Top Products

M23053/5-103-9

Brady

ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;

850-001-22-348

Glenair

CONNECTOR ACCESSORY; Manufacturer Series: 850;

0800886

Phoenix Contact

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Material: PA; Assembly Item Name: END CLAMP; MIL Conformity: NO;

1718250100

Molex

CONNECTOR ACCESSORY;

5212

Keystone Electronics

CONNECTOR ACCESSORY; Assembly Item Name: BATTERY CONTACT; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Material: STEEL;

08-50-0106

Molex

Molex 08-50-0106 CONTACT has CRIMP terminals, LOOSE contact design, and is made of BRASS. It is used with wire sizes ranging from 24 AWG to 18 AWG in applications such as 2139, 3001, and 3069 assemblies.

1-967067-1

TE Connectivity

CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;

50125-8000

Molex

The Molex 50125-8000 is a male contact assembly product with crimp terminal type. It is designed for use with the 51047 series housing, featuring a finish thickness of 35 and chain contact design. Ideal for wire sizes ranging from 28 to 26 AWG, it offers a straight mounting style and is made of phosphor bronze material.

FMK2G-K201

Molex

FMK2G-K201 by Molex is an assembly product with UL approvals. It has a max operating temperature of 100°C and a min operating temperature of -35°C. This zinc hood can be mounted using screws or #4-40 option.

M23053/16-004-0

TE Connectivity

TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.

350550-1

TE Connectivity

TE Connectivity 350550-1 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CRIMP terminals. Rated for 600V, it supports wire gauge up to 14 AWG and rated current of 19A. Constructed with STRANDED brass material, it has approvals from CSA, UL, VDE for applications requiring POWER design at temperatures ranging from -55 to 105 °C.

AW2S-C

Amphenol

CONNECTOR ACCESSORY; Manufacturer Series: AW2S-C;

8655MH0911LF

AMPHENOL ICC

Amphenol Icc's 8655MH0911LF is a ZINC HOOD with #4-40 SCREW mounting. It operates b/w -55 to 125 °C, making it ideal for assembly products requiring durable and secure connections in various temperature conditions.

W4PA

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Material: POLYBUTYLENE TEREPHTHALATE; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel;

1-968857-1

TE Connectivity

TE Connectivity 1-968857-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 13 AWG and rated current of 22 A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40 to 130 °C.

1731110060

Molex

Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).

33012-3003

Molex

Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.

5749081-1

TE Connectivity

CONNECTOR ACCESSORY; Shielding: YES; MIL Conformity: NO; Wire Gauge (AWG): 0; Material: ZINC ALLOY; Additional Features: SHIELDED;

12089040

Delphi Connection Systems

CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;

43030-0003

Molex

The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.