Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

44A0111-28-9

Manufacturer

TE Connectivity
Manufacturer's Part Number

44A0111-28-9
Description

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Insulator Material: PVDF; DIN Conformity: NO; Conductor Material: COPPER ALLOY;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

MMBF170LT1G

Onsemi

MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.

Details

RC0603FR-071KL

Yageo

Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.

Details

LM107H

General Electric Solid State

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;

Details

SMBJ18CA

KYOCERA AVX

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM107H/883

Advanced Micro Devices

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;

Details

2N7002

Secos

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;

Details

2N2222A

Semitronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Nexperia

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM555CN

Onsemi

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;

Details

BAT54SLT1G

Onsemi

BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.

Details

2N2222A

New Jersey Semiconductor Products

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

LM358N

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N7002

Formosa Microsemi

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;

Details

LM107H/883C

National Semiconductor

LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.

Details

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

2N2222A

Allegro MicroSystems

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

44A0111-28-9 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	28
Construction:	STRANDED
Maximum Wire Size:	28 AWG
IEC Conformity:	NO
Shielding:	NO
Minimum Operating Temperature:	-65 Cel
Rated Voltage:	600 V
Conductor Finish:	TIN
MIL Conformity:	NO
Wire & Cable Name:	FLEXIBLE CORD AND FIXTURE WIRE
Connector Accessory Type:	WIRE AND CABLE
Insulator Material:	PVDF
No. of Conductors:	1
Conductor Material:	COPPER ALLOY
Maximum Operating Temperature:	150 Cel
DIN Conformity:	NO
Stranding:	7X36
Diameter:	.76 mm
Cable Types:	SPEC 44

Category Top Products

2249-C-60

Pomona Electronics

Pomona Electronics 2249-C-60 is a solid construction shielded communication cable with BNC male connectors on both sides. It has a rated voltage of 500V, max operating temp of 50°C, and diameter of 4.95mm. Ideal for high-frequency signal transmission in various electrical applications.

2273116-4

TE Connectivity

TE Connectivity's 2273116-4 is a 22 AWG communication cable with a rated voltage of 250V. It operates b/w -40°C to 80°C, supporting up to 4A current. Ideal for applications requiring reliable electrical connections in various environments.

44A0111-22-95

TE Connectivity

TE Connectivity's 44A0111-22-95 is a 600V rated wire with TIN finish, ideal for applications requiring flexibility. Featuring 22 AWG copper alloy conductor, it operates b/w -65°C to 150°C temperatures. Suitable for SPEC 44 cable types, this wire is commonly used in flexible cord and fixture wire applications.

233

Belden

CABLE ASSEMBLY; Connector Side-1: M12 MALE; Connector Side-2: M12 MALE; Rated Voltage: 60 V; Rated Current: 4 A; Shielding: YES;

135110-01-M0.75

Amphenol

CABLE ASSEMBLY;

VHA00009-1M

Infinite Electronics International

CABLE ASSEMBLY;

M17/113-RG316

Tri-star Electronics International

WIRE AND CABLE; Shielding: YES; Jacket Material: FEP; DIN Conformity: NO; Insulator Material: PTFE; MIL Conformity: YES;

M22759/11-22-9

Allied Wire & Cable

WIRE AND CABLE; Shielding: NO; Diameter: 1.295 mm; No. of Conductors: 1; Insulator Material: PTFE; Construction: STRANDED;

M22759/32-20-9

Marmon Aerospace & Defense

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Application: AEROSPACE; Stranding: 19X32; Approvals (V): SAE;

797580014

Molex

CABLE ASSEMBLY; Connector Side-1: TERMINAL; Connector Side-2: TERMINAL; Shielding: NO; MIL Conformity: NO; DIN Conformity: NO;

687840003

Molex

CABLE ASSEMBLY; Connector Side-1: USB A PLUG; Connector Side-2: MICRO USB B PLUG; Wire Gauge (AWG): 28;

M22759/32-18-93

Defense Logistics Agency

M22759/32-18-93 by Defense Logistics Agency is a MIL-approved stranded wire with 600V rating, copper conductor, and crosslinked modified ETFE insulation. It has a max temp of 150°C, AWG 18 gauge, and 19x30 stranding. Ideal for applications requiring flexible cord and fixture wire.

3365/12

3m Electronic Products Division

The 3m Electronic Products Division's 3365/12 is a UL-approved FLAT FLEXIBLE CABLE with 12 TINNED COPPER conductors. Featuring STRANDED construction, it has a rated voltage of 300V and operates b/w -20°C to 105°C. Ideal for applications requiring flexibility and durability in electrical wiring setups.

40155

Helukabel

WIRE AND CABLE;

55A0111-22-0

TE Connectivity

TE Connectivity's 55A0111-22-0 is a stranded electrical wire with a rated voltage of 600V and max operating temperature of 150°C. It is constructed with tin-finished copper alloy conductor and has a wire gauge of 22 AWG. This flexible cord and fixture wire is commonly used in applications requiring CSA, CAA, MIL, and UL approvals.

U3A00057-1M

L-com

CABLE ASSEMBLY;

12509

Helukabel

WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 80 Cel; Application: MACHINE TOOLS, CONTROL SYSTEMS, CONNECTION BETWEEN CONTROL; Cross Section Area: 2.5 mm2;

44A0111-24-0

TE Connectivity

TE Connectivity's 44A0111-24-0 cable is a stranded wire with tin finish, rated at 600V. With a conductor material of copper alloy and max operating temperature of 150°C, it is ideal for general purpose and lightweight applications. Featuring a wire gauge of 24 AWG and diameter of 1.02mm, this flexible cord and fixture wire is suitable for various electrical needs.

152661014

Molex

Molex 152661014 is a FLAT FLEXIBLE CABLE with 31 conductors, rated for 60V and 0.5A. It operates b/w -40°C to 105°C, making it suitable for applications requiring a compact design and high flexibility in electrical wiring setups.

TC2050-IDC-NL

Tag-connect

CABLE ASSEMBLY; Connector Side-1: IDC; Connector Side-2: TAG-CONNECT; Shielding: NO; Additional Features: PLUG-OF-NAILS;