Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

350218-3

Manufacturer

TE Connectivity
Manufacturer's Part Number

350218-3
Description

CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; MIL Conformity: NO; DIN Conformity: NO; Cross Section Area: 2.08 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Jiangsu Jiejie Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

LM107H

National Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;

Details

KSZ9031RNXIC

Microchip Technology

KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.

Details

BAV99

Hitano Enterprise

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

Vpt Components

NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

LM358MX

Fairchild Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

OHN3020U

Optek Technology

MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;

Details

IRLML6402TRPBF

Infineon Technologies

IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.

Details

LM555CMX

Texas Instruments

LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.

Details

FDLL4148

National Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Taiwan Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Baneasa S A

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;

Details

1N4148

Central Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MBR0520LT1

Onsemi

MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.

Details

1N4148

Rfe International

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;

Details

FDN5618P

Onsemi

FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

350218-3 Technical Details

TYPE	DESCRIPTION
Wire Gauge (AWG):	14
Maximum Wire Size:	14 AWG
IEC Conformity:	NO
Cross Section Area:	2.08 mm2
Minimum Wire Size:	20 AWG
Design:	POWER
MIL Conformity:	NO
Contact Gender:	MALE
Assembly Item Name:	CONTACT
Maximum Operating Temperature:	105 Cel
Rated AC Voltage:	600 V
DIN Conformity:	NO
Mounting Style:	STRAIGHT
Other Names:	3502183 -403431893-CSI 350218-3-ND -350218-3-SI -403431893-SI A97893TR -403431893-SI-ND 2266-350218-3TR A97893CT
Usage:	UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING
Construction:	STRANDED
Minimum Cable Entry:	.06 inch
Terminal Type:	CRIMP
Approvals (V):	CSA; UL; VDE
Material:	PHOSPHOR BRONZE
Minimum Operating Temperature:	-55 Cel
Rated Voltage:	600 V
Connector Accessory Type:	CONNECTOR ACCESSORY
Rated Current:	19 A
Maximum Cable Entry:	.13 inch
Cable Types:	DISCRETE WIRE

Category Top Products

776364-1

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;

WM-4P

TE Connectivity

TE Connectivity's WM-4P is a power and signal assembly item designed for DTM SERIES. With a max operating temp of 125°C and min of -55°C, it supports wires up to 0 AWG. Made of PBT, it's ideal for various applications requiring reliable connections in extreme temperature conditions.

112264-ZZ

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0;

AW3S-1939

Amphenol

CONNECTOR ACCESSORY;

MINI-SSHL-002T-P0.2

J S T Mfg

MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.

1727040095

Molex

Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).

SPH-004T-P0.5S

J S T Mfg

SPH-004T-P0.5S by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender and STRAIGHT mounting style. It features SQ PIN-SKT contact style made of BRASS, ideal for assembly products requiring reliable connections in various applications.

DTM06-6S-C017

TE Connectivity

TE Connectivity's DTM06-6S-C017 is a FEMALE contact assembly product with 7.5A rated current and 250V rated DC voltage. It can handle temperatures from -55°C to 125°C, with cable entries ranging from 0.053" to 0.12". Ideal for power and signal applications.

1-350524-9

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 85 Cel; Wire Gauge (AWG): 0;

1-329631-2

TE Connectivity

CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; DIN Conformity: NO; Usage: BNC CONNECTOR; IEC Conformity: NO; MIL Conformity: NO;

WM-4S

TE Connectivity

TE Connectivity's WM-4S is a POWER AND SIGNAL WEDGE ITEM for DTM SERIES assemblies. It supports wire sizes up to 0 AWG, with a temp range of -55 to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.

16-02-0104

Molex

CONNECTOR ACCESSORY;

50058-8100

Molex

The Molex 50058-8100 is a bellowed contact assembly product with phosphor bronze material. It features crimp terminal type, 0.02" min cable entry, and 0.039" max cable entry. Ideal for use with 51021 housing, this female contact accommodates wire sizes from 32 to 28 AWG.

DF1B-2022SC

Hirose Electric

CONNECTOR ACCESSORY; Material: PHOSPHOR BRONZE; Contact Gender: FEMALE; MIL Conformity: NO; IEC Conformity: NO; Mounting Style: STRAIGHT;

48099-4000

Molex

CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 67910-0002;

2856773

Phoenix Contact

CONNECTOR ACCESSORY;

293726-1

TE Connectivity

CONNECTOR ACCESSORY;

AT13-204-2005

Amphenol

CONNECTOR ACCESSORY;

2414-001-2486

TE Connectivity

TE Connectivity 2414-001-2486 is a washer assembly item for HDP SERIES. It has max operating temp of 125°C and min of -55°C. Features include max wire size of 0 AWG, female contact gender, and steel material.

1-66099-5

TE Connectivity

TE Connectivity 1-66099-5 is a crimp terminal for CPC/G and M series connectors. Featuring brass material, it has a cross section area of 1.4 mm2 and can accommodate wire sizes from 18 to 16 AWG. Ideal for power and signal applications with a rated current of 13A at temperatures ranging from -55 to 90°C.