Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

3-282836-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

3-282836-2
Description

MODULAR TERMINAL BLOCK; Mounting Type: BOARD; Fastening Method: SOLDER; Additional Features: UL94V-0; Wire Gauge: 16 AWG; Voltage (Rated): 300 V;
Datasheet

Datasheet

Not In Stock

Popular Products

M39029/58360

Esterline Technologies

CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;

Details

MBRA160T3G

Onsemi

MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.

Details

2N7002

Promax-johnton

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;

Details

FDC5614P

TAIZHOU ELECTRONICS CO LTD

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;

Details

BAV99

Panjit International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

M39029/58-360

Defense Logistics Agency

CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;

Details

SMBJ18CA

Telefunken Microelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Jiangsu Changjiang Electronics Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;

Details

2N2222A

Surge Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;

Details

BAV99

Bkc Semiconductors

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

International Components

RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

NC7WZ17P6X

Onsemi

The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.

Details

2N7002

Onsemi

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;

Details

2N7002

Silicon Standard

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;

Details

1N4148WS

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Semtech Electronics

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Lite-on Technology

RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;

Details

3-282836-2 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	1.3 mm²
No. of Decks:	1
Current (Rated):	13.5 A
Fastening Method:	Solder
Voltage (Rated):	300 V
Additional Features:	UL94V-0
No. of Rows:	1
No. of Ways:	4
Mounting Type:	Board
Terminal & Terminal Block Type:	Modular Terminal Block
Safety Approval:	UL
Wire Gauge:	16 AWG

Category Top Products

320568

TE Connectivity

TE Connectivity 320568 is a UL-approved RING TERMINAL with a wire gauge of 10 AWG and rated voltage of 300 V. It is suitable for use in terminals & terminal blocks, offering a wire cross section of 6 mm2 and one-way connection.

3-520141-2

TE Connectivity

TE Connectivity 3-520141-2 is a UL-approved PUSH-ON TERMINAL for 14 AWG wire with 600V rating. Featuring FEMALE gender, it suits applications requiring secure connections in terminals & terminal blocks.

2-2141598-2

TE Connectivity

TE Connectivity 2-2141598-2 is a TAB TERMINAL with UL approval, suitable for 13 AWG wire. It has a current rating of 30A and accommodates wires up to 2.5 mm². Ideal for male terminals in various applications requiring secure electrical connections.

2060-451/998-404

Wago

The Wago 2060-451/998-404 is a BARRIER STRIP TERMINAL BLOCK with 1 row, rated for 600V and 9A. It has CCA, CSA, CUL safety approvals and uses SPRING LOADED fastening method. Ideal for applications requiring secure wire connections in industrial settings.

1027

Zierick Manufacturing

TAB TERMINAL; Safety Approval: CUL; UL; Terminal Gender: MALE;

D-436-36CS2651

TE Connectivity

WIRE TERMINAL; Mounting Type: CABLE; Wire Gauge: 20 AWG; Wire Cross Section: .61 mm2; Safety Approval: UL;

191640050

Molex

PUSH-ON TERMINAL; Wire Gauge: 14 AWG; Manufacturer Series: 19164; Wire Cross Section: 2.5 mm2; Terminal Gender: FEMALE;

62409-1

TE Connectivity

TAB TERMINAL; Safety Approval: UL; Terminal Gender: MALE;

2390

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

1-796634-2

TE Connectivity

TE Connectivity 1-796634-2 is a UL-approved strip terminal block with 12 ways, rated for 15A current and 300V voltage. It accommodates 12 AWG wire gauge with a cross-section of 3mm², mounted via screws on cables. Ideal for various applications requiring secure electrical connections.

1374

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

190110035

Molex

PUSH-ON TERMINAL; Additional Features: BRASS; Wire Gauge: 18 AWG; Terminal Gender: FEMALE AND MALE;

62409-1

Tyco Electronics Amp

TAB TERMINAL; Terminal Gender: MALE; Manufacturer Series: 62409;

733-368

Wago

Wago's 733-368 strip terminal block has 8 ways, rated for 4A current and 150V voltage. It is a single-row board-mounted connector with safety approvals from ABS, CCA, CSA, DNVGL, EN, and IEC. Ideal for various applications requiring secure electrical connections.

190020045

Molex

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Manufacturer Series: 19002; Terminal Gender: FEMALE;

1-963748-1

Tyco Electronics Amp

TAB TERMINAL; Manufacturer Series: 963748; Terminal Gender: MALE; Wire Cross Section: 1 mm2;

20020332-G081B01LF

Amphenol Communications Solutions

20020332-G081B01LF by Amphenol is a BARRIER STRIP TERMINAL BLOCK for BOARD mounting. It supports 12 AWG wire gauge with 2.5 mm2 wire cross section and rated for 300V voltage & 10A current. Ideal for applications requiring secure electrical connections in industrial settings.

848

Keystone Electronics

WIRE TERMINAL;

2-36161-3

TE Connectivity

TE Connectivity's 2-36161-3 is a UL-approved RING TERMINAL with a wire gauge of 12 AWG and rated voltage of 300 V. It is designed for use in terminals & terminal blocks, specifically for female connections with a wire cross section of 3.37 mm2 and one-way configuration.

9-160463-2

TE Connectivity

TE Connectivity 9-160463-2 is a female push-on terminal with UL approval for 14 AWG wire, rated at 300V. Ideal for applications requiring secure connections in terminals and terminal blocks with wire cross section of 2.5 mm2.