Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

206322-9

Manufacturer

TE Connectivity
Manufacturer's Part Number

206322-9
Description

CONNECTOR ACCESSORY; Maximum Cable Entry: .703 inch; DIN Conformity: NO; Material: POLYETHYLENE; Shell Sizes: 17; Mounting Option-1: 15/16-20 UNEF-2B;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Texas Instruments

2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).

Details

SMBJ18CA

STMicroelectronics

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Rfe International

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/58360

Souriau

CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;

Details

2N7002

National Semiconductor

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;

Details

CRG0805F10K

Tyco Electronics Components

FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;

Details

SS14

Microsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Grande Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Promax-johnton

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

MMBT2907ALT1G

Rochester Electronics

PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;

Details

LL4148

Kec

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148WT

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2N2222A

Micropac Industries

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

BAV99

Weitron Technology

RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;

Details

2N2222A

Space Power Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FDV304P

Onsemi

The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.

Details

LM358AN

Texas Instruments

LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.

Details

LL4148-GS08

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

206322-9 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Wire Gauge (AWG):	0
Maximum Wire Size:	0 AWG
IEC Conformity:	NO
Material:	POLYETHYLENE
MIL Conformity:	NO
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CLAMPING ITEM
Mounting Option-1:	15/16-20 UNEF-2B
Shell Sizes:	17
Mounting Option-2:	SCREW
DIN Conformity:	NO
Maximum Cable Entry:	.703 inch

Category Top Products

AT62-201-16141

Amphenol

CONNECTOR ACCESSORY;

50148-8100

Molex

CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; IEC Conformity: NO;

282081-1

TE Connectivity

TE Connectivity 282081-1 is a SEALING ITEM for AMP SUPERSEAL 1.5 SERIES CONNECTORS. With a temp range of -40 to 130°C, it uses SILICONE RUBBER material and supports wire sizes up to 0 AWG.

5318201

Altech

CONNECTOR ACCESSORY; Maximum Operating Temperature: 120 Cel; DIN Conformity: NO; Material: GLASS FILLED POLYAMIDE6; Additional Features: IP68; Minimum Operating Temperature: -30 Cel;

2002-1492

Wago

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; Assembly Item Name: END PLATE; MIL Conformity: NO; IEC Conformity: NO;

3001

Keystone Electronics

CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: BATTERY CONTACT; Terminal Type: SOLDER; Material: PHOSPHOR BRONZE;

SPHD-001T-P0.5

J S T Mfg

SPHD-001T-P0.5 by J S T Mfg is a CRIMP terminal for PBV SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.039-0.059 inch cable entry. Ideal for 26-22 AWG wires in applications requiring FEMALE contacts at -25 to 85 °C temperature range.

2414-001-2486

TE Connectivity

TE Connectivity 2414-001-2486 is a washer assembly item for HDP SERIES. It has max operating temp of 125°C and min of -55°C. Features include max wire size of 0 AWG, female contact gender, and steel material.

1-104480-6

TE Connectivity

TE Connectivity 1-104480-6 is a CRIMP terminal with 300V rated voltage, suitable for DISCRETE WIRE cables. Featuring a contact resistance of 12 mohm, it has a max operating temperature of 105°C and is approved by CSA and UL for various applications in POWER AND SIGNAL designs.

221-505/000-004

Wago

TERMINAL BLOCK ACCESSORY;

M85049/88-19W03

TE Connectivity

CONNECTOR ACCESSORY; Shell Sizes: 19; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Material: ALUMINUM ALLOY; Maximum Operating Temperature: 175 Cel;

5398

Molex

CONNECTOR ACCESSORY;

66101-4

TE Connectivity

TE Connectivity 66101-4 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 16 AWG, it supports a rated current of 13 A. Made of brass, it's designed for power and signal applications with an operating temperature range from -55 to 150 °C.

W6S-P012

TE Connectivity

TE Connectivity's W6S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. It supports wire sizes up to 0 AWG, with operating temperatures ranging from -55°C to 125°C. Made of POLYBUTYLENE TEREPHTHALATE, it ensures reliable connections in various applications.

SXH-001T-P0.6N

J S T Mfg

SXH-001T-P0.6N by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes ranging from 26 AWG to 22 AWG and can handle up to 3A of current at a max operating temperature of 85°C. Ideal for applications requiring a FEMALE contact with a contact resistance of 10 mΩ.

13711548

Aptiv

Aptiv 13711548 CONTACT features FEMALE gender, CRIMP terminal type, and COPPER ALLOY material. Ideal for FLRY-B cable types with 0.0669-0.0827 inch cable entry. Used in Assembly Products applications.

5-928999-1

TE Connectivity

TE Connectivity 5-928999-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 22 AWG, rated for 7.5A current, and operates b/w -40 to 120 °C. Ideal for applications requiring female contact gender and cable entry ranging from 0.043 to 0.063 inch.

W12P

TE Connectivity

The TE Connectivity W12P is a UL-approved assembly product with operating temperatures ranging from -55°C to 125°C. It features a max wire size of 0 AWG and is designed for power and signal applications using polybutylene terephthalate material. Ideal for various industrial and commercial electrical connections.

AT60-202-20141

Amphenol

CONNECTOR ACCESSORY;

1393366-1

TE Connectivity

TE Connectivity's 1393366-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 11A. Ideal for applications requiring a female contact gender, with operating temperatures ranging from -40 to 125°C.