Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

170349-2

Manufacturer

TE Connectivity
Manufacturer's Part Number

170349-2
Description

TAB TERMINAL; Wire Gauge: 20 AWG; Safety Approval: UL; Terminal Gender: MALE; Wire Cross Section: .51 mm2;
Datasheet

Datasheet

Not In Stock

Popular Products

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

1N4148

Nte Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LM317T

Texas Instruments

LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.

Details

BSS138

Taitron Components

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;

Details

2N7002

Nexperia

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;

Details

GRM155R71H103KA88D

Murata Manufacturing

The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.

Details

FDN306P

Fairchild Semiconductor

P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;

Details

1N4148WT-7

Diodes Incorporated

1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.

Details

SMBJ18CA

Silicon Standard

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

C1206C104M5RACTU

KEMET Corporation

KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.

Details

ERJ2RKF1002X

Panasonic

Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

2N7002

Continental Device India

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;

Details

SMBJ18CA

Taiwan Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

M39029/56-351

Defense Logistics Agency

CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;

Details

1N4148WS

Diodes Incorporated

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Bytesonic Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

170349-2 Technical Details

TYPE	DESCRIPTION
Wire Cross Section:	0.51 mm²
Terminal Gender:	Male
Product Type:	Tab Terminal
Safety Compliance:	UL
Wire Gauge:	20 AWG

Category Top Products

2-520183-2

TE Connectivity

TE Connectivity's 2-520183-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wires, rated at 600 V. With a wire cross section of 0.82 mm2, it is commonly used in various applications requiring secure and efficient female terminal connections.

1935161

Phoenix Contact

Phoenix Contact 1935161 is a UL-approved barrier strip terminal block for BOARD mounting. With a rated voltage of 250V, it supports wire gauge up to 14 AWG and current up to 17.5A. Ideal for applications requiring secure connections in industrial control systems.

1714968

Phoenix Contact

Phoenix Contact 1714968 is a UL-approved barrier strip terminal block for boards. It supports wire gauge up to 10 AWG with 4 mm2 wire cross section and rated voltage of 500V. With fastening by screws, it has a current rating of 32A and offers 3 ways for secure connections in various applications.

8-9

J S T Mfg

RING TERMINAL; Wire Gauge: 8 AWG; Wire Cross Section: 10.52 mm2; Terminal Gender: FEMALE;

2-35108-1

TE Connectivity

TE Connectivity's 2-35108-1 is a UL-approved RING TERMINAL for 10 AWG wire, rated at 300V. With a wire cross section of 6.64 mm2, it is ideal for female terminals in various applications requiring secure electrical connections.

1365

Advanced Interconnections

PCB TERMINAL; Terminal Gender: FEMALE;

63824-1

TE Connectivity

TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;

4164

Advanced Interconnections

MODULAR TERMINAL BLOCK; Fastening Method: SCREW; Wire Gauge: 0 AWG; Voltage (Rated): 600 V; No. of Ways: 8; Current (Rated): 255 A;

2002-1611/1000-541

Wago

MODULAR TERMINAL BLOCK;

MS25036-153

Amphenol Communications Solutions

RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 2.08 mm2;

7-796634-2

TE Connectivity

TE Connectivity's 7-796634-2 is a UL-approved barrier strip terminal block with 4 ways, rated for 300V voltage and 15A current. Suitable for wire gauge up to 12 AWG and wire cross-section of 3mm², it finds application in various terminal and terminal block setups.

2092-1323

Wago

BARRIER STRIP TERMINAL BLOCK;

MKDS1/2-3,81

Phoenix Contact

The Phoenix Contact MKDS1/2-3,81 is a barrier strip terminal block with 2 ways and rated for 13.5A current at 200V voltage. It uses a screw fastening method and supports wire gauge up to 16 AWG, making it ideal for board mounting applications in various industries. Safety approvals include CB, CUL, EAC, SEV, and UL.

1869253

Phoenix Contact

Phoenix Contact 1869253 is a UL-approved barrier strip terminal block with 6 ways. It supports wire gauge up to 16 AWG and rated voltage of 250V, ideal for board mounting applications requiring a current rating of 13.5A.

3967

Vogt Ag Verbindungstechnik

PUSH-ON TERMINAL; Wire Gauge: 10 AWG; Wire Cross Section: 6 mm2; Terminal Gender: FEMALE;

5015

Zierick Manufacturing

TAB TERMINAL; Terminal Gender: MALE;

CPD1

Altech

MODULAR TERMINAL BLOCK;

938

Zierick Manufacturing

RING TERMINAL; Terminal Gender: MALE;

MC1,5/2-ST-3,81

Phoenix Contact

Phoenix Contact's MC1,5/2-ST-3,81 is a 2-way barrier strip terminal block with a rated voltage of 160V and current of 8A. It supports wire gauge up to 16 AWG and wire cross-section of 1.5mm², making it ideal for industrial applications requiring secure connections in tight spaces. The terminal block is approved by CB, CSA, CUL, EAC, UL, and VDE for safety compliance.

1945096

Phoenix Contact

The Phoenix Contact 1945096 is a STRIP TERMINAL BLOCK with 2 ways, rated for 250V and 8A. It is mounted on BOARD using CONNECTOR fastening method. This terminal block has safety approvals from CUL, EAC, and UL, making it ideal for various industrial applications requiring secure electrical connections.