Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

1062-14-0122

Manufacturer

TE Connectivity
Manufacturer's Part Number

1062-14-0122
Description

CONNECTOR ACCESSORY; Rated Current: 13 A; Terminal Type: CRIMP; Material: COPPER ALLOY; Contact Design: STAMPED; MIL Conformity: NO;
Datasheet

Datasheet

Not In Stock

Popular Products

2N2222A

Micro Commercial Components

Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;

Details

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

2N2222A

Bharat Electronics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WT

Yangzhou Yangjie Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Good-ark Electronics

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;

Details

2N2222A

Digitron Semiconductors

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

1N4148WT

Onsemi

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

Details

ATMEGA328P-AU

Microchip Technology

ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.

Details

EU2B-YS303C

Idec

ROTARY SWITCH;

Details

2N7002

Siliconix

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;

Details

2N2222A

Vishay Sprague

NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;

Details

2N7002

Philips Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

2902037

Phoenix Contact

MODULAR TERMINAL BLOCK;

Details

MBR0530T1G

Onsemi

MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.

Details

LM358MX

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

DS18B20

Maxim Integrated

DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

AT90CAN128-16AUR

Microchip Technology

AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.

Details

1062-14-0122 Technical Details

TYPE	DESCRIPTION
Mounting Style:	STRAIGHT
Other Names:	1734-1158-2 1734-1158-1
Wire Gauge (AWG):	14
Maximum Wire Size:	14 AWG
Minimum Cable Entry:	.095 inch
Contact Design:	STAMPED
Contact Style:	ROUND PIN-SOCKET
Terminal Type:	CRIMP
IEC Conformity:	NO
Material:	COPPER ALLOY
Minimum Operating Temperature:	-55 Cel
Cross Section Area:	2 mm2
Minimum Wire Size:	18 AWG
MIL Conformity:	NO
Terminal Length:	.3 inch
Contact Gender:	FEMALE
Connector Accessory Type:	CONNECTOR ACCESSORY
Assembly Item Name:	CONTACT
Maximum Operating Temperature:	125 Cel
Rated Current:	13 A
DIN Conformity:	NO
Maximum Cable Entry:	.15 inch

Category Top Products

WM-2P

TE Connectivity

The TE Connectivity WM-2P is an assembly product designed for DTM SERIES applications. With a temperature range of -55 to 125°C, it accommodates wires up to 0 AWG. Made of polybutylene terephthalate, it's ideal for power and signal connections in various industries.

5227

Keystone Electronics

CONNECTOR ACCESSORY;

5023810000

Molex

Molex 5023810000 is a signal contact assembly product with compression-style male contact. It has a rated current of 1A and rated AC/DC voltage of 50V. Designed for use with CLIK-MATE housing, it supports wire sizes from 26-28 AWG and cable entries up to 0.8 inch.

2414-001-2486

TE Connectivity

TE Connectivity 2414-001-2486 is a washer assembly item for HDP SERIES. It has max operating temp of 125°C and min of -55°C. Features include max wire size of 0 AWG, female contact gender, and steel material.

M23053/5-111-9

Sumitomo Electric Industries

ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;

17E-1657-09

Amphenol

The Amphenol 17E-1657-09 is a D-SUB CONNECTOR BACKSHELL made of ZINC ALLOY. It has a min cable entry of 0.21" and max cable entry of 0.32". Mounting options include SCREW (#4-40). Ideal for secure cable connections in various electronic assemblies.

1SET111008R0000

TE Connectivity

TE Connectivity's 1SET111008R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge and operates at max 105°C temperature. Ideal for applications requiring DISCRETE WIRE connections with STRAIGHT mounting style.

L17D204182TX

Amphenol

CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: HARDWARE-FEMALE SCREWLOCK; Additional Features: ROHS COMPLIANT; DIN Conformity: NO;

1050017:0001

Phoenix Contact

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO; Manufacturer Series: 1050017:0001; Assembly Item Name: TERMINAL MARKER;

13697414

Delphi Connection Systems

CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;

222-500

Wago

TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: MOUNTING ITEM;

1-66103-8

TE Connectivity

TE Connectivity 1-66103-8 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 20 AWG, it supports up to 13A current. Made of brass, it's ideal for power and signal applications in temperatures ranging from -55 to 90°C.

AT62-201-16141-22

Amphenol

CONNECTOR ACCESSORY;

DF3-2428SCFC

Hirose Electric

DF3-2428SCFC by Hirose Electric is a female contact with bellowed design, made of phosphor bronze. It has a finish thickness of 7.9 and terminal length of 0.108". Ideal for straight mounting applications in assembly products.

AT60-16-0122

Amphenol

CONNECTOR ACCESSORY;

3-2198617-7

TE Connectivity

TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.

7-745129-9

TE Connectivity

CONNECTOR ACCESSORY; Shielding: YES; Maximum Wire Size: 0 AWG; Assembly Item Name: FERRULE-STEPPED; Material: BRASS; Wire Gauge (AWG): 0;

3-640252-1

TE Connectivity

TE Connectivity 3-640252-1 is a signal contact with crimp terminal type, rated for 250V AC/DC and 6.5A current. It has a brass construction, CSA and UL approvals, suitable for SL-156 housing applications at temperatures ranging from -55 to 105°C.

39-00-0082

Molex

The Molex 39-00-0082 is a contact assembly product with a finish thickness of 35. It is designed for use with the 5559, 30068, and 42475 series housing. This male contact has a crimp terminal type and a square pin-socket contact style, making it suitable for applications requiring a max wire size of 16 AWG.

3030323

Phoenix Contact

TERMINAL BLOCK ACCESSORY; Rated Current: 41 A; DIN Conformity: NO; Assembly Item Name: BLOCK; MIL Conformity: NO; IEC Conformity: NO;