Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B82477-G4104-M

Manufacturer

TDK
Manufacturer's Part Number

B82477-G4104-M
Description

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
Datasheet

Datasheet

Not In Stock

Popular Products

LM2675M-ADJ/NOPB

National Semiconductor

SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

SMBJ18CA

Jgd Semiconductors

TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

BSS138W-7-F

Diodes Incorporated

Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.

Details

SS14

Frontier Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LL4148

Lite-on Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

PAP-06V-S

J S T Mfg

PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.

Details

LIS3DHTR

STMicroelectronics

LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.

Details

LM2931Z-5.0G

Onsemi

LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.

Details

2N2222A

Crystalonics

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

SMBJ18CA

Bourns

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ATMEGA328P-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

MMBT2222ALT1G

Rochester Electronics

NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;

Details

LAN8720A-CP-TR

Standard Microsystems

ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

LL4148GS08

Temic Semiconductors

LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.

Details

2N7002

Supertex

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;

Details

BAV99-7-F

Multicomp Pro

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Synsemi

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

B82477-G4104-M Technical Details

TYPE	DESCRIPTION
Case or Size Code:	5050
Surface Mount:	Yes
Terminal Finish:	Tin
Inductor Type:	General Purpose Inductor
Shielded:	Yes
Terminal Placement:	Dual Ended
No. of Terminals:	2
DC Resistance:	165 mΩ
Nominal Inductance (L):	100 μH
Package Style (Meter):	SMT
Core Material:	Ferrite
Package Height:	0.315 in (8 mm)
Test Frequency:	100 kHz
Maximum Operating Temperature:	125 °C (257 °F)
Construction:	Rectangular
Shape or Size Description:	Rectangular Package
Packing Method:	Tape and Reel, Blister, 13 in
Tolerance:	20 %
Package Length:	0.504 in (12.8 mm)
JESD-609 Code:	e3
Minimum Operating Temperature:	-55 °C (-67 °F)
Inductor Application:	Power Inductor
Maximum Rated Current:	1.7 A
No. of Functions:	1
Terminal Shape:	Wraparound
Package Width:	0.504 in (12.8 mm)

Category Top Products

RLB0914-102KL

Bourns

RLB0914-102KL by Bourns is a 1000uH fixed inductor with 0.65mm lead diameter and 5mm lead spacing. Ideal for RF applications, it has a max operating temperature of 125°C, self-resonance frequency of 1.3MHz, and matte tin terminal finish.

DR74-680-R

Cooper Electronic Technologies

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

IHLP5050FDER4R7M01

Vishay Intertechnology

Vishay Intertechnology's IHLP5050FDER4R7M01 is a shielded fixed inductor with 4.7uH nominal inductance, 13.5A max current, and 0.0087 ohm DC resistance. Ideal for power applications, it features dual-ended terminals and operates b/w -55°C to 125°C. Suitable for SMT mounting, this general purpose inductor has a compact 5050 case size.

SRP4020TA-1R0M

Bourns

Bourns SRP4020TA-1R0M is a shielded SMT inductor with 1uH nominal inductance, 5A max current, and 150°C max operating temp. Ideal for power applications due to its high quality factor, AEC-Q200 standard compliance, and compact rectangular package design.

0402HPH-R10XGRW

Coilcraft

0402HPH-R10XGRW by Coilcraft is a surface mount fixed inductor with 0.1 uH nominal inductance, 250 MHz test frequency, and 1580 MHz self-resonance frequency. Ideal for RF applications due to its rectangular shape, dual-ended terminals, and ceramic core material.

ASPIAIG-S8050-6R8M-T

Abracon

Abracon's ASPIAIG-S8050-6R8M-T is a shielded, surface mount fixed inductor with 6.8uH nominal inductance and 4.2A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 19MHz and operates b/w -40°C to 125°C.

MLZ1608N220LT000

TDK

MLZ1608N220LT000 by TDK is a surface mount, shielded fixed inductor with a nominal inductance of 22 uH. It has a max operating temperature of 125 °C and a max rated current of 0.19 A. This general purpose inductor is commonly used in various electronic applications.

4628

Jw Miller Magnetics

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Tolerance: 5 %;

B82734R2132B030

TDK

B82734R2132B030 by TDK is a fixed inductor with 47000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.3 A and operates b/w -40 to 125 °C, featuring a rectangular package style for PCB mount. Ideal for general purpose use, this inductor offers low DC resistance at 0.56 ohm and is constructed with ferrite core material.

LPS4018-103MRC

Coilcraft

Coilcraft's LPS4018-103MRC is a shielded, surface-mount power inductor with 10uH nominal inductance and 1.25A max rated current. Ideal for general purpose applications, it features a ferrite core, operates b/w -40 to 125°C, and has a self-resonance frequency of 40MHz.

XFL4020-222MEB

Coilcraft

Coilcraft XFL4020-222MEB is a shielded, surface mount power inductor with 2.2uH nominal inductance and 8A max rated current. Ideal for general purpose applications, it operates b/w -40 to 125°C, featuring a compact 4x4mm rectangular package suitable for various electronic devices.

IHLP5050CEER2R2M01

Vishay Intertechnology

Vishay Intertechnology's IHLP5050CEER2R2M01 is a shielded, surface mount inductor with 2.2uH nominal inductance and 16A max rated current. Ideal for high current applications, this rectangular package has dual-ended terminals and operates b/w -55°C to 125°C.

DR74-220-R

Coiltronics

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

DR127-150-R

Cooper Industries

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

SRU1048-6R8Y

Bourns

Bourns SRU1048-6R8Y is a shielded SMT inductor with 6.8uH nominal inductance, 4.8A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and ferrite core material.

SRP1038A-470M

Bourns

Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.

LQH32CN2R2M33L

Murata Manufacturing

LQH32CN2R2M33L by Murata is a surface mount fixed inductor with 2.2uH nominal inductance, suitable for power applications. It has a max rated current of 0.79A, operates b/w -40 to 85°C, and features dual-ended terminals with tin over nickel finish.

1277AS-H-1R0M=P2

Murata Manufacturing

1277AS-H-1R0M=P2 by Murata is a shielded, dual-ended fixed inductor with 1uH nominal inductance. Ideal for power applications, it has a max rated current of 3.1A and operates b/w -40°C to 85°C. Its compact SMT package measures 3.2mm x 2.5mm x 1.2mm, making it suitable for general purpose inductor needs.

PE-53932NL

Pulse Electronics

PE-53932NL by Pulse Electronics is a fixed inductor with 37uH nominal inductance, 2.24A max current, and -40 to 130°C operating temp range. Ideal for power applications, this toroid-shaped inductor features amorphous magnetic core material and a simple switcher design.

B78108S1472K000

TDK

B78108S1472K000 by TDK is a 4.7 uH general purpose inductor with 0.34 ohm DC resistance and 95 MHz self-resonance frequency. It has a max operating temperature of 125°C, making it suitable for RF applications requiring high Q factor and reliability in harsh environments. The axial package style with tubular construction and tin finish is ideal for RF circuits where space-saving and performance are crucial.