Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

B82422A1682K100

Manufacturer

TDK
Manufacturer's Part Number

B82422A1682K100
Description

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
Datasheet

Datasheet

Not In Stock

Popular Products

SMBJ18CA

Fairchild Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138NH6327XTSA2

Infineon Technologies

BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.

Details

BSS138

Yangzhou Yangjie Electronics

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;

Details

ISO1050DUBR

Texas Instruments

ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.

Details

1N4148

Surge Components

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

FT232RL-REEL

FTDI

FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.

Details

RC0402FR-0710KL

Yageo

Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.

Details

1N4148

Compensated Devices

RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;

Details

LM317T/NOPB

Texas Instruments

LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.

Details

06035C103KAT2A

KYOCERA AVX

06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.

Details

M85049/85-08W02

TE Connectivity

CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;

Details

EPCS4SI8N

Intel

EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.

Details

CDSOT23-SM712

Bourns

Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.

Details

1N4148

Leshan Radio

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Nexperia

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

BSS138

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;

Details

M24308/2-1F

Esterline Technologies

D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;

Details

IRLML6401TRPBF

Infineon Technologies

IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.

Details

2N7002DWH6327XTSA1

Infineon Technologies

2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.

Details

SMBJ18CA

Vishay Intertechnology

Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.

Details

B82422A1682K100 Technical Details

TYPE	DESCRIPTION
Case or Size Code:	1210
Surface Mount:	Yes
Terminal Finish:	Tin Silver Copper
Inductor Type:	General Purpose Inductor
Self Resonance Frequency:	90 MHz
Shielded:	No
Terminal Placement:	Dual Ended
No. of Terminals:	2
DC Resistance:	2.8 Ω
Nominal Inductance (L):	6.8 μH
Package Style (Meter):	SMT
Core Material:	Ferrite
Package Height:	0.079 in (2 mm)
Test Frequency:	1 MHz
Maximum Operating Temperature:	150 °C (302 °F)
Special Feature:	Q Factor is measured at 7.96 MHz
Construction:	Rectangular
Shape or Size Description:	Rectangular Package
Packing Method:	Tape and Reel, Blister, 7 in
Tolerance:	10 %
Package Length:	0.126 in (3.2 mm)
JESD-609 Code:	e1
Minimum Operating Temperature:	-55 °C (-67 °F)
Inductor Application:	RF Inductor
Maximum Rated Current:	135 mA
No. of Functions:	1
Minimum Quality Factor (at L-nom):	27
Terminal Shape:	J Bend
Reference Standard:	AEC-Q200
Package Width:	0.098 in (2.5 mm)

Category Top Products

MLZ1608N100LT

TDK

TDK's MLZ1608N100LT is a 10uH fixed inductor with dual-ended terminals, suitable for RF applications. It features a max operating temperature of 125°C, 0.3A rated current, and 20% tolerance. This shielded, surface-mount inductor has a compact 0603 size and ferrite core material.

NRS4018T100MDGJ

Taiyo Yuden

NRS4018T100MDGJ by Taiyo Yuden is a fixed inductor with 10uH nominal inductance, 1.2A max rated current, and 125°C max operating temp. Ideal for power applications, this SMT inductor features a ferrite core, 0.18 ohm DC resistance, and dual-ended terminals for efficient performance.

DFE252012P-1R0M=P2

Murata Manufacturing

Murata Manufacturing's DFE252012P-1R0M=P2 is a shielded, surface mount fixed inductor with 1uH nominal inductance and 3.2A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C and features a compact rectangular package (2.5mm x 2mm x 1.2mm).

IHLP1212BZER2R2M11

Vishay Intertechnology

Vishay Intertechnology's IHLP1212BZER2R2M11 is a shielded, surface mount fixed inductor with 2.2uH nominal inductance and 3A max rated current. Ideal for high current applications, this rectangular package inductor operates b/w -55°C to 125°C with a self-resonance frequency of 55MHz.

B82422-T1104-K

Siemens

GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Minimum Quality Factor (at L-nom): 20;

SRP1038A-470M

Bourns

Bourns SRP1038A-470M is a shielded, dual-ended SMT inductor with 47uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C with a self-resonance frequency of 5MHz. AEC-Q200 compliant, this general-purpose inductor offers high quality factor and wraparound terminals.

0402HPH-R10XJRW

Coilcraft

0402HPH-R10XJRW by Coilcraft is a surface mount fixed inductor with 0.1 uH nominal inductance, 250 MHz test frequency, and 1580 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ceramic core material.

DR74-100-R

Cooper Electronic Technologies

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

PE-0402CD400JTG

Pulse Electronics

PE-0402CD400JTG by Pulse Electronics is a fixed inductor with 0.04uH nominal inductance, 2240MHz self-resonance frequency, and 26 min quality factor. Ideal for RF applications due to its dual-ended terminal placement and rectangular package shape.

32994

Hirel Systems

GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Shape or Size Description: RECTANGULAR PACKAGE; Maximum Rated Current: 62.2 A;

SRR6603-100ML

Bourns

The Bourns SRR6603-100ML is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1A max rated current. Ideal for power applications, it operates b/w -55°C to 125°C with a self-resonance frequency of 38MHz.

43343

Pico Electronics

Pico Electronics 43343 is a shielded fixed inductor with radial terminal placement. It has a nominal inductance of 40uH, max rated current of 2.68A, and operates at up to 100°C. Ideal for power applications, this cylindrical package features series connected terminals and meets MIL-PRF-27 standards.

CLF6045NIT-100M-D

TDK

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;

5511

Jw Miller Magnetics

GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 50 uH;

SRP7028A-100M

Bourns

Bourns SRP7028A-100M is a shielded SMT inductor with 10uH nominal inductance, 3.5A max current, and 150°C max operating temp. Ideal for power applications, it features a rectangular package, wraparound terminals, and AEC-Q200 compliance.

74438357047

Wuerth Elektronik & Kg

Wurth Elektronik 74438357047 is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3.9A max rated current. Ideal for power applications, it features a rectangular package, IRON ALLOY core material, and operates b/w -40 to 125 °C.

SRP1265A-470M

Bourns

Bourns SRP1265A-470M is a shielded SMT inductor with 47uH nominal inductance, 6.5A max current, and 150°C max operating temp. Ideal for power applications due to its high quality factor and AEC-Q200 reference standard compliance.

PM54-101K-RC

Bourns

Bourns PM54-101K-RC is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 10% tolerance. It is a general-purpose inductor suitable for power applications, featuring dual-ended terminals and a max operating temperature of 125°C. Ideal for various electronic devices requiring efficient power management.

5511

Api Technologies

GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;

XAL4020-102MEC

Coilcraft

Coilcraft XAL4020-102MEC is a shielded, surface mount inductor with 1uH nominal inductance and 9.6A max rated current. Ideal for power applications, it has a self-resonance frequency of 79MHz and operates b/w -40°C to 125°C.