Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

STM32H725VGT6

Manufacturer

STMicroelectronics
Manufacturer's Part Number

STM32H725VGT6
Description

MICROCONTROLLER, RISC; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE; Format: FLOATING POINT;
Datasheet

Datasheet

Not In Stock

Popular Products

ABS25-32.768KHZ-T

Abracon

Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.

Details

SS14

Changzhou Galaxy Century Microelectronics

RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;

Details

LL4148

Rugao Dachang Electronic

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

1N4148

Continental Device India

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

MC33269T-3.3G

Onsemi

MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.

Details

ULN-2803A

Vishay Sprague

Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.

Details

2902037

Phoenix Contact

MODULAR TERMINAL BLOCK;

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

LL4148-GS08

Vishay Telefunken

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

ULN2803A

Rochester Electronics

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;

Details

1N4148

Multicomp Pro

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

1N4148

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;

Details

BSS138

Diodes Incorporated

N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;

Details

SMBJ18CA

Uniohm

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM555CM

National Semiconductor

PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;

Details

BSS138DW-7-F

Diodes Incorporated

BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.

Details

1N4148

Texas Instruments

1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.

Details

1N4148

Sensitron Semiconductor

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

2N2222A

Taitron Components

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;

Details

DS18B20

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;

Details

STM32H725VGT6 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	1.71 V
Package Body Material:	PLASTIC/EPOXY
Integrated Cache:	YES
Surface Mount:	YES
On Chip Data RAM Width:	8
No. of DMA Channels:	16
Address Bus Width:	0
Technology:	CMOS
Maximum Clock Frequency:	50 MHz
Package Shape:	SQUARE
Terminal Form:	GULL WING
Package Code:	LFQFP
Bit Size:	32
DAC Channels:	YES
Package Equivalence Code:	QFP100,.63SQ,20
Digital To Analog Convertors:	2-Ch 12-Bit
PWM Channels:	YES
Connectivity:	ETHERNET, CAN(3), I2C(5), I2S(4), LPUART, SAI(2), SDMMC(2), SPI(5), SWPMI, UART(4), USART(4), USB
ROM Programmability:	FLASH
Analog To Digital Convertors:	26-Ch 16-Bit, 4-Ch 12-Bit
Terminal Pitch:	.5 mm
CPU Family:	CORTEX-M7
Nominal Supply Voltage:	1.8 V
Maximum Seated Height:	1.6 mm
Maximum Supply Current:	360 mA
ADC Channels:	YES
No. of Terminals:	100
No. of Timers:	24
No. of Serial I/Os:	12
DMA Channels:	YES
Terminal Position:	QUAD
Format:	FLOATING POINT
Package Style (Meter):	FLATPACK, LOW PROFILE, FINE PITCH
No. of I/O Lines:	67
JESD-30 Code:	S-PQFP-G100
ROM Words:	1048576
Maximum Operating Temperature:	85 Cel
Width:	14 mm
Data EEPROM Size:	0
Speed:	550 rpm
Peripheral IC Type:	MICROCONTROLLER, RISC
Maximum Supply Voltage:	3.6 V
RAM Bytes:	577536
Low Power Mode:	YES
Boundary Scan:	YES
External Data Bus Width:	0
Peripherals:	ANALOG COMPARATOR(2), BOR, DMA(16), LCD, POR, RTC, TIMER(24), WDT(2)
Minimum Operating Temperature:	-40 Cel
Length:	14 mm
On Chip Program ROM Width:	8

Category Top Products

ATSAME70Q21A-ANT

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;

TM4C123GH6PZT

Texas Instruments

TM4C123GH6PZT by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family, featuring 32768 bytes of RAM and 65536 ROM words. It operates at a max clock frequency of 25 MHz, suitable for industrial applications requiring up to 69 I/O lines and PWM/ADC channels.

STM32F469AGH6

STMicroelectronics

STM32F469AGH6 by STMicroelectronics is a 32-bit microcontroller with 24-bit address bus width, 169 terminals, and 1048576 ROM words. It operates at a max clock frequency of 26 MHz and features peripherals like CRC, DMA(2), TIMER(17), RTC, WDT. Ideal for industrial applications requiring CAN, I2C, I2S, UART connectivity.

ATMEGA8515-16AU

Microchip Technology

ATMEGA8515-16AU by Microchip: 16MHz clock, 512B EEPROM, SPI & USART connectivity. Ideal for industrial applications requiring low power mode and featuring 35 I/O lines.

STM32G071GBU6

STMicroelectronics

STM32G071GBU6 by STMicroelectronics is a 32-bit microcontroller with 131072 ROM words and 36864 RAM bytes. It features 12-Ch 12-Bit ADC channels, 2-Ch 12-Bit DAC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and precise analog-to-digital conversion.

STM8S003F3P6TR

STMicroelectronics

STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.

STM32F205VET6TR

STMicroelectronics

STM32F205VET6TR by STMicroelectronics is a 32-bit microcontroller with Cortex-M3 CPU, 524288 ROM words, and 131072 RAM bytes. It features 16 ADC channels, 2 DAC channels, and 16 DMA channels. Ideal for industrial applications requiring high-speed processing and low power consumption.

STM32F427ZIT6

STMicroelectronics

STM32F427ZIT6 by STMicroelectronics is a 32-bit microcontroller with 144 terminals, operating at up to 50 MHz. It features 262144 bytes of RAM, 24 ADC channels, and connectivity options like USB, Ethernet, and UART. Ideal for industrial applications requiring high-speed processing and extensive peripheral support.

STM32F205RET6TR

STMicroelectronics

STM32F205RET6TR by STMicroelectronics is a 32-bit microcontroller with 16 external interrupts, 15 timers, and 16 DMA channels. It features 2 DAC and ADC channels, operates at up to 26 MHz, and has a max supply voltage of 3.6 V. Ideal for industrial applications requiring high-speed processing and multiple I/O options.

ATSAMD21G18A-MU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;

ATMEGA16A-AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;

STM32H723ZGI6

STMicroelectronics

MICROCONTROLLER, RISC;

MK60FN1M0VLQ12

NXP Semiconductors

NXP Semiconductors' MK60FN1M0VLQ12 is a 32-bit microcontroller with Cortex-M4 CPU, 144 terminals, and 131072 bytes of RAM. It features 2 DAC channels, 59 ADC channels, and operates at a max clock frequency of 50 MHz. Ideal for industrial applications requiring high-speed processing and extensive connectivity options like CAN, I2C, I2S, SPI, and UART.

ATSAMV71Q21B-AAB

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;

STM32U585CIT6Q

STMicroelectronics

MICROCONTROLLER, RISC;

ATMEGA128A-AUR

Microchip Technology

ATMEGA128A-AUR by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 16 MHz. It has 131072 ROM words, 4096 bytes of RAM, and 8 analog to digital converters. This microcontroller is commonly used in industrial applications requiring low power mode and connectivity through I2C, SPI, and USART interfaces.

MK66FN2M0VLQ18

NXP Semiconductors

NXP Semiconductors' MK66FN2M0VLQ18 is a 32-bit microcontroller with Cortex-M4F CPU, offering 262144 bytes of RAM and 2097152 ROM words. It operates at up to 50 MHz clock frequency, suitable for industrial applications requiring high-speed processing and ADC/DAC capabilities. With a wide temperature range (-40 to 105°C) and low supply voltage (1.71-3.6V), it's ideal for various embedded systems in demanding environments.

STM32F303VCT6

STMicroelectronics

STM32F303VCT6 by STMicroelectronics is a 32-bit microcontroller with 262144 ROM words and 40960 RAM bytes. It features 39-Ch 12-Bit ADC channels, 2-Ch 12-Bit DAC channels, and peripherals like CAN, I2C, SPI, UART, USB for industrial applications requiring high-speed processing up to 32 MHz. With a wide operating temperature range from -40°C to +85°C and low profile flatpack package style at just 1.6 mm seated height, it offers versatile connectivity options in a compact form factor suitable for various embedded systems.

ATSAMD21G18A-AUT

Microchip Technology

ATSAMD21G18A-AUT by Microchip is a 32-bit microcontroller with 48 terminals, operating at up to 32 MHz. It features 16 external interrupts, 14 ADC channels, and low power mode. Ideal for industrial applications requiring high-speed processing and multiple connectivity options like I2C, SPI, and USART.

STM32H7A3ZIT6Q

STMicroelectronics

STM32H7A3ZIT6Q by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 18 timers, and AD/DA converters. It operates at up to 64.3 MHz with 1413120 bytes of RAM and offers low power mode. Suitable for industrial applications requiring high-speed processing and extensive peripheral connectivity like CAN, I2C, SPI, USB.