Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

SI8600AC-B-IS

Manufacturer

Skyworks Solutions
Manufacturer's Part Number

SI8600AC-B-IS
Description

INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Datasheet

Datasheet

Not In Stock

Popular Products

ULN2803A

Allegro MicroSystems

NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;

Details

FT232RQ-REEL

FTDI

FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.

Details

LM358M

Texas Instruments

LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.

Details

1N4148WT

Diotec Semiconductor Ag

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

ABS10-32.768KHZ-T

Abracon

Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.

Details

MBR0520LT3G

Onsemi

MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.

Details

BSS84-7-F

Diodes Incorporated

Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.

Details

2N2222A

Secos

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;

Details

LM358AN

Onsemi

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

Tesla Elektronicke Soucastky

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

AT90CAN128-16AU

Atmel

MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;

Details

1N4148

New Jersey Semiconductor Products

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

M39029/58-360

Positronic Industries

CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;

Details

DS18B20Z

Dallas Semiconductor

TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;

Details

SS14

Daco Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

SMBJ18CA

Micro Commercial Components

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Rectron

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

DS18B20U+

Analog Devices

DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.

Details

L78L05ABZ-AP

STMicroelectronics

L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.

Details

SI8600AC-B-IS Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	PLASTIC/EPOXY
Nominal Supply Voltage:	3.3 V
Maximum Time At Peak Reflow Temperature (s):	NOT SPECIFIED
Maximum Seated Height:	1.75 mm
Surface Mount:	YES
No. of Terminals:	8
Terminal Position:	DUAL
Package Style (Meter):	SMALL OUTLINE
JESD-30 Code:	R-PDSO-G8
Package Shape:	RECTANGULAR
Terminal Form:	GULL WING
Maximum Operating Temperature:	125 Cel
Package Code:	SOP
Interface IC Type:	INTERFACE CIRCUIT
Width:	3.9 mm
Maximum Supply Voltage:	5.5 V
Minimum Operating Temperature:	-40 Cel
No. of Functions:	1
Qualification:	Not Qualified
Package Equivalence Code:	SOP8,.25
Length:	4.9 mm
Additional Features:	ALSO OPERARTES AT 5V SUPPLY
Peak Reflow Temperature (C):	NOT SPECIFIED
Terminal Pitch:	1.27 mm
Temperature Grade:	AUTOMOTIVE

Category Top Products

ADUM5000ARWZ

Analog Devices

ADUM5000ARWZ by Analog Devices is a small outline interface IC with 16 terminals and a max seated height of 2.65 mm. It has a temperature grade suitable for industrial applications and uses gull wing terminal form.

SN65DSI84ZXHR

Texas Instruments

SN65DSI84ZXHR by Texas Instruments is a 64-terminal interface IC with a package style of grid array, very thin profile, and fine pitch. It operates b/w -40 to 85°C, with a supply voltage range of 1.65V to 1.95V. Ideal for industrial applications requiring high-speed data transmission in compact electronic devices.

ADUM160N0BRZ

Analog Devices

ADUM160N0BRZ by Analog Devices is a 16-terminal IC with 6 functions, operating b/w -40 to 125 °C. It has a supply voltage range of 1.7V to 5.5V and is designed for automotive applications requiring interface circuitry in small outline packages.

ADBMS6822WCCSZ

Analog Devices

ADBMS6822WCCSZ by Analog Devices is a 32-terminal interface IC with 2 functions, operating b/w -40°C to 125°C. It has a package style of CHIP CARRIER and is suitable for automotive applications due to its AEC-Q100 screening level and terminal pitch of 0.5mm.

ISOW7841DWER

Texas Instruments

ISOW7841DWER by Texas Instruments is a digital isolator with 4 channels, operating at a supply voltage range of 3V to 5.5V. It features a small outline package style, dual terminal position, and automotive temperature grade suitability. This IC is ideal for applications requiring high isolation levels in harsh environments.

PCA9517ADP,118

NXP Semiconductors

PCA9517ADP,118 by NXP Semiconductors is an 8-terminal IC with a supply voltage range of 0.9V to 5.5V and operating temperature from -40°C to 85°C. It features a small outline package style, suitable for industrial applications requiring interface circuitry in compact spaces with surface mount capability.

ADUM1402CRWZ

Analog Devices

ADUM1402CRWZ by Analog Devices is a 16-terminal IC with 4 functions, operating b/w -40 to 105°C. It supports EIA-232, EIA-422, and EIA-485 interfaces at supply voltages from 2.7V to 5.5V. Ideal for industrial applications requiring small outline packaging and CMOS technology.

ISO7021FDR

Texas Instruments

ISO7021FDR by Texas Instruments is a dual-channel interface IC with CMOS technology. It operates b/w -55 to 125°C, suitable for military-grade applications. With a supply voltage range of 1.71V to 5.5V, it comes in a small outline package ideal for surface mount assembly.

ADUM1411ARWZ

Analog Devices

ADUM1411ARWZ by Analog Devices is a 16-terminal interface IC with CMOS technology. It operates b/w -40 to 105°C, with supply voltage range of 2.7-5.5V. Ideal for industrial applications requiring small outline package and dual terminal position.

XISO6740FDWR

Texas Instruments

XISO6740FDWR by Texas Instruments is a 16-terminal IC with 4 functions, operating b/w -40 to 125°C. It has a supply voltage range of 1.71V to 5.5V and is ideal for automotive applications due to its small outline package and dual terminal position.

ISO7221MD

Texas Instruments

ISO7221MD by Texas Instruments is an interface IC with 2 channels, CMOS technology, and a supply voltage range of 3.3V to 5V. It is designed for automotive applications, featuring a small outline package style and dual terminal position for surface mount assembly. Operating temperature ranges from -40°C to 125°C, making it suitable for harsh environments.

MCP2122T-E/SN

Microchip Technology

MCP2122T-E/SN by Microchip Tech is an 8-terminal IC with a supply voltage range of 1.8-5.5V, ideal for automotive applications. It operates b/w -40 to 125°C, featuring CMOS tech and matte tin finish on gull wing terminals. This small outline package measures 4.9mm x 3.9mm with a height of 1.75mm, suitable for surface mount assembly in various electronic devices.

ISO7762DBQ

Texas Instruments

ISO7762DBQ by Texas Instruments is a CMOS interface IC with 6 functions, operating b/w -55 to 125 °C. It has a supply voltage range of 2.25-5.5 V and comes in a small outline package suitable for military-grade applications. The device features dual terminals with nickel/palladium/gold finish, making it ideal for various other function interface circuits.

PCA9306DP,118

NXP Semiconductors

PCA9306DP,118 by NXP Semiconductors is an 8-terminal interface IC with a supply voltage range of 1.1V to 5.5V and operating temperature from -40°C to 85°C. It features a small outline package style suitable for industrial applications requiring level shifting and bidirectional voltage translation.

SI8642ED-B-IS2R

Silicon Labs

SI8642ED-B-IS2R by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package with 16 terminals and Gull Wing terminal form. Ideal for applications requiring high-speed data isolation in compact designs.

ADUM5402CRWZ

Analog Devices

ADUM5402CRWZ by Analog Devices is a 16-terminal interface IC with supply voltage range of 3-5.5V, operating temperature from -40 to 105°C. It is used in industrial applications requiring small outline package and dual terminal position for reliable signal isolation.

MBI6661GSD

Macroblock

Other Interface ICs;

DS2484R+T

Analog Devices

DS2484R+T by Analog Devices is a small outline, low profile interface IC with 6 terminals. It operates at a voltage range of 1.71V to 5.25V and has an industrial temperature grade of -40°C to 85°C. This IC is commonly used in other function interface applications.

LT4430ES6#TRMPBF

Analog Devices

LT4430ES6#TRMPBF by Analog Devices is a small outline interface IC with 6 terminals. It operates b/w 3-20V, suitable for applications requiring a supply voltage of 5V. With a temperature range of 0-125°C, it is ideal for various electronic devices needing precise signal interfacing.

SI8622EC-B-IS

Skyworks Solutions

INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;