Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

CP2102N-A02-GQFN24

Manufacturer

Silicon Labs
Manufacturer's Part Number

CP2102N-A02-GQFN24
Description

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Datasheet

Datasheet

Not In Stock

Popular Products

ESD5Z5.0T1G

Onsemi

ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.

Details

1N4148WS

Sangdest Microelectronics (Nanjing)

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WS

Vishay Intertechnology

Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.

Details

MBR0520L-T1

Won-top Electronics

MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.

Details

BSS138-TP

Micro Commercial Components

BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.

Details

2N7002

NXP Semiconductors

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;

Details

1N4148WS

General Instrument

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

CRGCQ0805F10R

TE Connectivity

TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.

Details

CRGCQ0805F10K

TE Connectivity

TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.

Details

EU2B-YS2J03C

Idec

ROTARY SWITCH;

Details

1N4148WT

Onsemi

1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.

Details

1N4148

Microchip Technology

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

OPA2227UA

Texas Instruments

OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.

Details

LM555CM

Texas Instruments

LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.

Details

BAV99

Motorola

RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;

Details

LM358N

Motorola

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

1N4148

Formosa Microsemi

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

LL4148

Fairchild Semiconductor

RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;

Details

BAV99

Continental Device India

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

LM317AEMP/NOPB

Texas Instruments

LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.

Details

CP2102N-A02-GQFN24 Technical Details

TYPE	DESCRIPTION
Minimum Supply Voltage:	3 V
Package Body Material:	UNSPECIFIED
Nominal Supply Voltage:	3.3 V
Maximum Seated Height:	.8 mm
Surface Mount:	YES
Terminal Finish:	MATTE TIN
No. of Terminals:	24
Terminal Position:	QUAD
Package Style (Meter):	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Address Bus Width:	0
Maximum Data Transfer Rate:	1.5 MBps
Technology:	CMOS
JESD-30 Code:	S-XQCC-N24
Package Shape:	SQUARE
Terminal Form:	NO LEAD
Maximum Operating Temperature:	85 Cel
Package Code:	HVQCCN
Width:	4 mm
Moisture Sensitivity Level (MSL):	2
Peripheral IC Type:	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Drive Interface Standard:	RS232; RS485
Maximum Supply Voltage:	3.6 V
External Data Bus Width:	0
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Length:	4 mm
Peak Reflow Temperature (C):	260
Bus Compatibility:	UART
Terminal Pitch:	.5 mm
Temperature Grade:	INDUSTRIAL

Category Top Products

USB2514I-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

PM8576B-FEI

Microchip Technology

Microchip Technology's PM8576B-FEI is a bus controller IC with 1311 terminals, operating b/w -40°C to 105°C. It supports data transfer rates up to 174 Gbps and interfaces with I2C, PCI, SMBUS, and UART buses. Ideal for applications requiring high-speed data processing in various electronic systems.

CP2102N-A02-GQFN24R

Silicon Labs

CP2102N-A02-GQFN24R by Silicon Labs is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 1.5 MBps. Ideal for RS232 and RS485 drive interfaces in industrial applications.

PCI9030-AA60PIF

Broadcom

Broadcom's PCI9030-AA60PIF is a 32-bit bus controller with a max clock frequency of 60 MHz. It operates at 3.3V and supports PCI bus compatibility, offering a data transfer rate of up to 240 MBps. This chip, housed in a square flatpack package, is ideal for applications requiring high-speed data processing on PCI buses.

FT231XS-T

FTDI

FT231XS-T by FTDI is a small outline, shrink pitch bus controller with UART and USB compatibility. It operates at 2.97-5.5V, supports up to 12.02MHz clock frequency, and has a dual terminal position for various applications in electronics design.

SC18IS602BIPW/S8HP

NXP Semiconductors

NXP Semiconductors' SC18IS602BIPW/S8HP is a Bus Controller IC with I2C compatibility. It operates b/w -40 to 85 °C, supporting data transfer rates up to 0.225 MBps. This small outline chip has 16 terminals, suitable for industrial applications requiring reliable communication within a compact design.

USBN9604-28MX

Texas Instruments

The Texas Instruments USBN9604-28MX is a bus controller with 3.3/5V power supplies, 28 terminals, and operates b/w 0 to 70°C. It features a small outline package style suitable for surface mount applications. With Gull Wing terminal form and tin lead finish, it's ideal for commercial temperature grade environments requiring up to 40mA supply current.

VNC232Q1BREEL

FTDI

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: VQCCN; Package Shape: SQUARE;

TUSB8042AIRGCR

Texas Instruments

TUSB8042AIRGCR by Texas Instruments is a 64-terminal chip carrier with a max data transfer rate of 625 MBps. It operates in industrial temperatures (-40 to 85 °C) and supports I2C/SMBUS bus compatibility. Ideal for USB bus control applications, it has a CMOS technology and no-lead terminal form.

PEX8608-BA50BCG

Broadcom

Broadcom's PEX8608-BA50BCG is a PCI bus controller with 196 terminals, operating at 100 MHz clock frequency. It supports I2C, PCI, and SMBus compatibility, with a data transfer rate of 0.0125 MBps. This CMOS technology device has a package style of grid array and is suitable for various applications requiring high-speed data processing.

FT232RNQ-TRAY

FTDI

FTDI's FT232RNQ-TRAY is a BUS CONTROLLER with UART compatibility. It operates b/w -40 to 85 °C, supporting data rates up to 60 MBps at a clock frequency of 12.02 MHz. With a compact SQUARE package style and QUAD terminal position, it is ideal for various USB applications.

MCP2221A-I/SL

Microchip Technology

MCP2221A-I/SL by Microchip is a small outline bus controller with 14 terminals, operating at 3-5.5V and clock frequency up to 12MHz. It supports I2C, SMBUS, UART, USB for industrial applications requiring data transfer rates of up to 1.5MBps.

FT245RNQ-TRAY

FTDI

FTDI's FT245RNQ-TRAY is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It offers a data transfer rate of 60MBps, clocked at 12.02MHz, suitable for applications requiring high-speed USB interfacing in compact spaces due to its 0.9mm seated height and small package size.

PCA9564D,118

NXP Semiconductors

BUS CONTROLLER, I2C; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;

PM40052B1-F3EI

Microchip Technology

PM40052B1-F3EI by Microchip Technology is a bus controller IC with 753 terminals in a square plastic/epoxy package. It supports I2C, SMBUS, and UART buses, making it ideal for PCI applications requiring CMOS technology and surface mount installation.

XR22800IL32-F

Exar

Exar's XR22800IL32-F is a surface mount bus controller with 32 terminals and a square package. It operates at a max clock frequency of 25 MHz and is compatible with the I2C bus. This versatile chip is commonly used in industrial applications requiring universal serial bus peripheral control.

21554-AA

Intel

Bus Controllers; Temperature Grade: COMMERCIAL; Terminal Form: BALL; No. of Terminals: 304; Package Code: BGA; Package Shape: SQUARE;

89H32NT24AG2ZCHLGI

Renesas Electronics

Renesas Electronics 89H32NT24AG2ZCHLGI is a Bus Controller IC with 484 terminals, operating at -40 to 85 °C. It supports I2C, ISA, VGA buses with a max clock frequency of 125 MHz and data transfer rate of 32000 MBps. Ideal for industrial applications requiring high-speed data processing in compact systems.

CYPD3171-24LQXQ

Cypress Semiconductor

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;

USB2244I-AEZG-06-TR

Microchip Technology

The Microchip Technology USB2244I-AEZG-06-TR is a BUS CONTROLLER IC with 36 terminals, operating at -40 to 85°C. It supports I2C, SPI, UART, and USB buses with a data rate of 35 MBps and clock frequency up to 24 MHz. Ideal for industrial applications requiring low-profile components.