Image shown is a representation only. Exact specifications should be obtained from the product data sheet.

MC-14632.7680KA-A3:PURESN

Manufacturer

Seiko Epson
Manufacturer's Part Number

MC-14632.7680KA-A3:PURESN
Description

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/FIRST YEAR; Load Capacitance: 12.5 pF; Drive Level: .5 uW;
Datasheet

Datasheet

Not In Stock

Popular Products

LM317T

Comset Semiconductors

Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;

Details

LM358AN

Samsung

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

2N2222A

General Diode

NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;

Details

2N7002-7-F

SPC TECHNOLOGY/ MULTICOMP

N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;

Details

BAV99

Shanghai Lunsure Electronic Technology

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BSS138BK,215

NXP Semiconductors

NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.

Details

1N4148

Diotec Electronics

RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;

Details

43025-0400

Molex

The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.

Details

SMBJ18CA

General Semiconductor

TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148

Kec

RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;

Details

BAV99

Eic Semiconductor

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Tak Cheong Electronics Holdings

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

1N4148WT

Taitron Components

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

BAV99

Good-ark Electronics

RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;

Details

INA826AIDGKR

Texas Instruments

INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.

Details

BSS138

Vishay Intertechnology

Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.

Details

LM358N

Freescale Semiconductor

OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;

Details

SS14

Jgd Semiconductors

RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;

Details

USB2514BI-AEZG

Standard Microsystems

BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;

Details

SN6505BDBVR

Texas Instruments

SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.

Details

MC-14632.7680KA-A3:PURESN Technical Details

TYPE	DESCRIPTION
Load Capacitance:	12.5 pF
Frequency Tolerance:	20 ppm
Frequency Stability:	144 %
Series Resistance:	65000 ohm
Terminal Finish:	TIN
JESD-609 Code:	e3
Minimum Operating Temperature:	-40 Cel
Mounting Feature:	SURFACE MOUNT
Drive Level:	.5 uW
Nominal Operating Frequency:	.032768 MHz
Aging:	3 PPM/FIRST YEAR
Physical Dimension:	7mm x 1.5mm x 1.4mm
Crystal or Resonator Type:	PARALLEL - FUNDAMENTAL
Maximum Operating Temperature:	85 Cel

Category Top Products

HC49U-12.288-20-50-60-30-ATF

Multicomp Pro

HC49U-12.288-20-50-60-30-ATF by Multicomp Pro is a 12.288 MHz crystal oscillator with 20 ppm frequency tolerance, 50% stability, and 35 ohm series resistance. Ideal for applications requiring precise timing such as telecommunications equipment due to its high accuracy and reliability in extreme temperature conditions from -10°C to 60°C.

ABM11W-32.0000MHZ-8-D1X-T3

Abracon

ABM11W-32.0000MHZ-8-D1X-T3 by Abracon is a 32 MHz crystal oscillator with 10 ppm frequency tolerance and 20% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems.

CM7V-T1A32.768KHZ6PF+/-10PPMTAQC

Micro Crystal Ag

Micro Crystal Ag's CM7V-T1A32.768KHZ6PF+/-10PPMTAQC is a crystal oscillator with 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing at frequencies around 0.032768 MHz in various electronic devices.

E8WSDC12-32.768K

Ecliptek

PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Drive Level: .5 uW; Frequency Stability: 144 %;

NX1612SA-50M-EXS00A-CS08403

Nihon Dempa Kogyo

NX1612SA-50M-EXS00A-CS08403 by Nihon Dempa Kogyo is a crystal oscillator with 10 ppm frequency tolerance, 15% stability, and 80 ohm series resistance. Ideal for applications requiring a parallel-fundamental type resonator at 50 MHz, operating b/w -30 to 85 °C with an aging rate of 3 PPM/yr.

ATS049A

Cts

ATS049A by Cts is a crystal oscillator with 30 ppm frequency tolerance, 50% stability, and 120 ohm series resistance. Ideal for applications requiring precise timing at 4.9152 MHz, it operates b/w -20 to 70 °C with low aging of 5 PPM/YEAR.

FL2500213Z

Diodes Incorporated

FL2500213Z by Diodes Inc. is a crystal oscillator with 25MHz nominal frequency, 20ppm frequency tolerance, and 20% stability. Ideal for applications requiring precise timing such as telecommunications equipment, networking devices, and industrial automation systems.

ABLS2-12.000MHZ-D4Y-T

Abracon

ABLS2-12.000MHZ-D4Y-T by Abracon is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel-fundamental crystal type in a compact surface mount design.

MC-14632.7680KA-A0:ROHS

Seiko Epson

MC-14632.7680KA-A0:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency, it operates b/w -40 to 85 °C and features Tin/Bismuth terminal finish.

NX3225GD-8.000M-STD-CRA-3

Nihon Dempa Kogyo

NX3225GD-8.000M-STD-CRA-3 by Nihon Dempa Kogyo is a crystal oscillator with 8 MHz frequency, 50 ppm tolerance, and 150% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 150 °C, it features gold terminal finish and surface mounting.

ABM8G-24.000MHZ-18-D-2-Y-T

Abracon

ABM8G-24.000MHZ-18-D-2-Y-T by Abracon is a 24 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications equipment and industrial automation systems.

ABLS-25.000MHZ-8-D-4-Y-F-T

Abracon

ABLS-25.000MHZ-8-D-4-Y-F-T by Abracon is a 25 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it operates b/w -40 to 85 °C and features a parallel fundamental crystal type.

ABM3B-11.0592MHZ-10-1-U-T

Abracon

ABM3B-11.0592MHZ-10-1-U-T by Abracon is a crystal oscillator with 10 ppm frequency tolerance, 10% stability, and 100 ohm series resistance. Ideal for applications requiring precise timing at 11.0592 MHz such as telecommunications equipment due to its surface mount feature and nickel gold terminal finish.

AB-20.000MHZ-B2

Abracon

AB-20.000MHZ-B2 by Abracon is a 20 MHz crystal oscillator with 50 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Measures 11.5mm x 5mm x 13.46mm and operates b/w -20°C to 70°C temperature range.

9C-24.000MEEJ-T

Txc

9C-24.000MEEJ-T by Txc is a 24 MHz Crystal Oscillator with 10 ppm Frequency Tolerance, 10% Stability, and 30 ohm Series Resistance. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications and networking equipment.

ABM8G-12.288MHZ-18-D-2-Y-T

Abracon

ABM8G-12.288MHZ-18-D-2-Y-T by Abracon is a 12.288 MHz crystal oscillator with 20 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with surface mounting feature.

ABM8-16.000MHZ-10-D7G-T

Abracon

ABM8-16.000MHZ-10-D7G-T by Abracon is a 16 MHz crystal oscillator with 15 ppm frequency tolerance and 15% stability. Ideal for applications requiring precise timing, such as in telecommunications equipment or industrial automation systems. Operating temperature range from -40 to 85 °C with surface mounting feature.

ABM8-20.000MHZ-B2-T

Abracon

ABM8-20.000MHZ-B2-T by Abracon is a 20 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial control systems. Measures 3.2mm x 2.5mm x 0.8mm, operates b/w -20°C to 70°C, and features nickel gold terminal finish for reliable performance.

ABM3B-8.000MHZ-10-1-U-T

Abracon

ABM3B-8.000MHZ-10-1-U-T by Abracon is a 8 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing in temperature range of -10 to 60 °C, such as telecommunications equipment and industrial automation systems.

LFXTAL050789CUTT

Iqd Frequency Products

LFXTAL050789CUTT by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance and 108% stability. Operating at 0.032768 MHz, it features a series resistance of 90000 ohm and aging rate of 3 PPM/YEAR. Ideal for applications requiring precise timing in temperature range from -40 to 85 °C.